Methodology for Wide Band-Gap Device Dynamic Characterization
- The Univ. of Tennessee, Knoxville, TN (United States)
- United Technologies Research Center, East Hartford, CT (United States)
Here, the double pulse test (DPT) is a widely accepted method to evaluate the dynamic behavior of power devices. Considering the high switching-speed capability of wide band-gap devices, the test results are very sensitive to the alignment of voltage and current (V-I) measurements. Also, because of the shoot-through current induced by Cdv/dt (i.e., cross-talk), the switching losses of the nonoperating switch device in a phase-leg must be considered in addition to the operating device. This paper summarizes the key issues of the DPT, including components and layout design, measurement considerations, grounding effects, and data processing. Additionally, a practical method is proposed for phase-leg switching loss evaluation by calculating the difference between the input energy supplied by a dc capacitor and the output energy stored in a load inductor. Based on a phase-leg power module built with 1200-V/50-A SiC MOSFETs, the test results show that this method can accurately evaluate the switching loss of both the upper and lower switches by detecting only one switching current and voltage, and it is immune to V-I timing misalignment errors.
- Research Organization:
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Sponsoring Organization:
- USDOE
- Grant/Contract Number:
- AC05-00OR22725
- OSTI ID:
- 1399113
- Journal Information:
- IEEE Transactions on Power Electronics, Vol. 32, Issue 12; ISSN 0885-8993
- Publisher:
- IEEECopyright Statement
- Country of Publication:
- United States
- Language:
- English
Web of Science
Similar Records
Characterization and modeling of the power Insulated Gate Bipolar Transistor
Characterization and Comparison of Trench and Planar Silicon Carbide (SiC) MOSFET at Different Temperatures