High-voltage nanosecond pulse shaper

Journal Article · Sun Nov 01 04:00:00 EST 1987 · Instrum. Exp. Tech. (Engl. Transl.); (United States)

OSTI ID:5303225

Kapishnikov, N K; Muratov, V M; Shatanov, A A

A high-voltage pulse shaper with an output of up to 250 kV, a base duration of approx. 10 nsec, and a repetition frequency of 50 pulses/sec is described. The described high-voltage nanosecond pulse shaper is designed for one-orbit extraction of an electron beam from a betatron. A diagram of the pulse shaper, which employs a single-stage generator is shown. The shaping element is a low-inductance capacitor bank of series-parallel KVI-3 (2200 pF at 10 kV) or K15-10 (4700 pF at 31.5 kV) disk ceramic capacitors. Four capacitors are connected in parallel and up to 25 are connected in series.

• Research Organization: Tomsk Polytechnic Institute (USSR)
• OSTI ID: 5303225
• Journal Information: Instrum. Exp. Tech. (Engl. Transl.); (United States), Journal Name: Instrum. Exp. Tech. (Engl. Transl.); (United States) Vol. 30:3; ISSN INETA
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS
430303* -- Particle Accelerators-- Experimental Facilities & Equipment
ACCELERATORS
BEAM EXTRACTION
BEAM PRODUCTION
BEAMS
BETATRONS
CALIBRATION
CAPACITORS
CYCLIC ACCELERATORS
ELECTRICAL EQUIPMENT
ELECTRON BEAMS
ELECTRONIC CIRCUITS
ELECTRONIC EQUIPMENT
ENERGY RANGE
EQUIPMENT
FUNCTION GENERATORS
HIGH-VOLTAGE PULSE GENERATORS
KEV RANGE
KEV RANGE 100-1000
LEPTON BEAMS
PARTICLE BEAMS
PERFORMANCE
PULSE CIRCUITS
PULSE GENERATORS
PULSE SHAPERS
SIGNAL CONDITIONERS
TIMING PROPERTIES