High-power nanosecond pulse-train generator

Journal Article · Sun Nov 01 04:00:00 EST 1987 · Instrum. Exp. Tech. (Engl. Transl.); (United States)

OSTI ID:5179476

Isakov, I F; Logachev, E I; Opekunov, M S; Pechenkin, S A; Remnev, G E; Usov, Yu S

A generator is described that provides at the load a pulse train with a repetition frequency of 10/sup 3/-10/sup 6/ Hz of higher. The pulses have an amplitude of up to 150 kV for a duration of 50 nsec. The generator contains two shaping and two transmission times of KVI-300 low-impedance cable, which are connected in series with the load. The shaping lines are powered by two independently triggered voltage-pulse generators to produce a pause between pulses of >10/sup -6/ sec. Due to loss reduction in the discharge circuit, the amplitude of the second pulse increases with an increase in the pause between pulses of up to 300 nsec, beyond which the curve is saturated.

• Research Organization: Tomsk Polytechnic Institute (USSR)
• OSTI ID: 5179476
• Journal Information: Instrum. Exp. Tech. (Engl. Transl.); (United States), Journal Name: Instrum. Exp. Tech. (Engl. Transl.); (United States) Vol. 30:3; ISSN INETA
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS
430303* -- Particle Accelerators-- Experimental Facilities & Equipment
ACCELERATORS
AMPLITUDES
BEAM PRODUCTION
BEAM TRANSPORT
BEAMS
CALIBRATION
ELECTRON BEAMS
ELECTRON SOURCES
ELECTRONIC CIRCUITS
ELECTRONIC EQUIPMENT
ENERGY RANGE
EQUIPMENT
FUNCTION GENERATORS
HIGH-VOLTAGE PULSE GENERATORS
ION BEAMS
ION SOURCES
KEV RANGE
KEV RANGE 100-1000
LEPTON BEAMS
PARTICLE BEAMS
PARTICLE SOURCES
PULSE CIRCUITS
PULSE GENERATORS
PULSE SHAPERS
RADIATION SOURCES
SIGNAL CONDITIONERS
TIMING PROPERTIES