skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Contrasting SnTe–NaSbTe2 and SnTe–NaBiTe2 Thermoelectric Alloys: High Performance Facilitated by Increased Cation Vacancies and Lattice Softening

Journal Article · · Journal of the American Chemical Society
DOI:https://doi.org/10.1021/jacs.0c05650· OSTI ID:1657192
 [1];  [1];  [1];  [2];  [1];  [1];  [3];  [3];  [1];  [2];  [1];  [1];  [4]
  1. Northwestern Univ., Evanston, IL (United States)
  2. Univ. of Michigan, Ann Arbor, MI (United States)
  3. Argonne National Lab. (ANL), Lemont, IL (United States)
  4. Northwestern Univ., Evanston, IL (United States); Argonne National Lab. (ANL), Lemont, IL (United States)

Defect chemistry is critical to designing high performance thermoelectric materials. In SnTe, the naturally large density of cation vacancies results in excessive hole doping and frustrates the ability to control the thermoelectric properties. Yet, recent work also associates the vacancies with suppressed sound velocities and low lattice thermal conductivity, underscoring the need to understand the interplay between alloying, vacancies, and the transport properties of SnTe. Here, we report solid solutions of SnTe with NaSbTe2 and NaBiTe2 (NaSnmSbTem+2 and NaSnmBiTem+2, respectively) and focus on the impact of the ternary alloys on the cation vacancies and thermoelectric properties. We find introduction of NaSbTe2, but not NaBiTe2, into SnTe nearly doubles the natural concentration of Sn vacancies. Furthermore, DFT calculations suggest that both NaSbTe2 and NaBiTe2 facilitate valence band convergence and simultaneously narrow the band gap. These effects improve the power factors but also make the alloys more prone to detrimental bipolar diffusion. Indeed, the performance of NaSnmBiTem+2 is limited by strong bipolar transport and only exhibits modest maximum ZTs ≈ 0.85 at 900 K. In NaSnmSbTem+2 however, the doubled vacancy concentration raises the charge carrier density and suppresses bipolar diffusion, resulting in superior power factors than those of the Bi-containing analogues. Lastly, NaSbTe2 incorporation lowers the sound velocity of SnTe to give glasslike lattice thermal conductivities. Facilitated by the favorable impacts of band convergence, vacancy-augmented hole concentration, and lattice softening, NaSnmSbTem+2 reaches high ZT ≈ 1.2 at 800-900 K and a competitive average ZTavg of 0.7 over 300-873 K. The difference in ZT between two chemically similar compounds underscores the importance of intrinsic defects in engineering high-performance thermoelectrics.

Research Organization:
Argonne National Laboratory (ANL), Argonne, IL (United States); Northwestern Univ., Evanston, IL (United States)
Sponsoring Organization:
USDOE Office of Science (SC), Office of Basic Energy Sciences (BES); National Science Foundation (NSF); US Dept. of Commerce; National Institute of Standards and Technology (NIST), Center for Hierarchical Materials Design (CHiMaD); USDOE Office of Science (SC), Basic Energy Sciences (BES)
Grant/Contract Number:
AC02-06CH11357; SC0014520; DMR-1720139; DGE-1324585; 70NANB19H005
OSTI ID:
1657192
Alternate ID(s):
OSTI ID: 1778879
Journal Information:
Journal of the American Chemical Society, Vol. 142, Issue 28; ISSN 0002-7863
Publisher:
American Chemical Society (ACS)Copyright Statement
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 45 works
Citation information provided by
Web of Science

References (53)

Thermoelectric generators: A review of applications journal May 2017
Thermoelectric Advances to Capture Waste Heat in Automobiles journal June 2018
Materials for thermoelectric energy conversion journal April 1988
Rationally Designing High-Performance Bulk Thermoelectric Materials journal August 2016
New and Old Concepts in Thermoelectric Materials journal November 2009
Pb1−x Sn x Te Alloys: Application Considerations journal December 2010
High thermoelectric potential of n -type Pb 1− x Ti x Te alloys journal August 2016
Non-equilibrium processing leads to record high thermoelectric figure of merit in PbTe–SrTe journal July 2016
Contrasting role of antimony and bismuth dopants on the thermoelectric performance of lead selenide journal May 2014
Significant lattice thermal conductivity reduction following phase separation of the highly efficient Ge x Pb 1- x Te thermoelectric alloys : Significant lattice thermal conductivity reduction in (Ge,Pb)Te alloys journal May 2014
A simultaneous increase in the ZT and the corresponding critical temperature of p-type Bi 0.4 Sb 1.6 Te 3 by a combined strategy of dual nanoinclusions and carrier engineering journal January 2014
Thermoelectric properties of Ti 0.3 Zr 0.35 Hf 0.35 Ni 1.005 Sn half-Heusler alloy journal August 2019
Recent progress in half-Heusler thermoelectric materials journal April 2016
Avoided crossing of rattler modes in thermoelectric materials journal August 2008
Convergence of multi-valley bands as the electronic origin of high thermoelectric performance in CoSb3 skutterudites journal October 2015
High Thermoelectric Performance in SnTe–AgSbTe 2 Alloys from Lattice Softening, Giant Phonon–Vacancy Scattering, and Valence Band Convergence journal February 2018
Eco-Friendly SnTe Thermoelectric Materials: Progress and Future Challenges journal September 2017
Manipulation of Band Structure and Interstitial Defects for Improving Thermoelectric SnTe journal June 2018
High Thermoelectric Performance of p-Type SnTe via a Synergistic Band Engineering and Nanostructuring Approach journal May 2014
Codoping in SnTe: Enhancement of Thermoelectric Performance through Synergy of Resonance Levels and Band Convergence journal April 2015
Extraordinary role of Hg in enhancing the thermoelectric performance of p-type SnTe journal January 2015
Simultaneously enhancing the power factor and reducing the thermal conductivity of SnTe via introducing its analogues journal January 2017
Realizing high thermoelectric properties of SnTe via synergistic band engineering and structure engineering journal November 2019
Optimization of thermoelectric efficiency in SnTe: the case for the light band journal January 2014
Deviations from stoichiometry and electrical properties in SnTe journal January 1963
The origin of low thermal conductivity in Sn 1−x Sb x Te: phonon scattering via layered intergrowth nanostructures journal January 2016
Valence Band Modification and High Thermoelectric Performance in SnTe Heavily Alloyed with MnTe journal August 2015
Promoting SnTe as an Eco-Friendly Solution for p-PbTe Thermoelectric via Band Convergence and Interstitial Defects journal March 2017
Figure of merit ZT of a thermoelectric device defined from materials properties journal January 2017
Convergence of electronic bands for high performance bulk thermoelectrics journal May 2011
Band Engineering of Thermoelectric Materials journal October 2012
The panoscopic approach to high performance thermoelectrics journal January 2014
Absence of Nanostructuring in NaPb m SbTe m +2 : Solid Solutions with High Thermoelectric Performance in the Intermediate Temperature Regime journal April 2018
High Thermoelectric Performance in PbSe–NaSbSe 2 Alloys from Valence Band Convergence and Low Thermal Conductivity journal July 2019
Band Structure and Laser Action in Pb x Sn 1 x Te journal June 1966
Chemical Principles of Topological Semimetals journal April 2018
Experimental realization of a topological crystalline insulator in SnTe journal September 2012
SnTe–AgBiTe 2 as an efficient thermoelectric material with low thermal conductivity journal January 2014
Solids and Surfaces: A Chemist's View of Bonding in Extended Structures report July 1988
Crystal orbital Hamilton populations (COHP): energy-resolved visualization of chemical bonding in solids based on density-functional calculations journal August 1993
Optical band gap and the Burstein–Moss effect in iodine doped PbTe using diffuse reflectance infrared Fourier transform spectroscopy journal July 2013
Amphoteric Indium Enables Carrier Engineering to Enhance the Power Factor and Thermoelectric Performance in n ‐Type Ag n Pb 100 In n Te 100+2 n (LIST) journal March 2019
High Thermoelectric Performance SnTe–In 2 Te 3 Solid Solutions Enabled by Resonant Levels and Strong Vacancy Phonon Scattering journal November 2015
Scattering of phonons by vacancies journal November 1987
Analytical Models of Phonon–Point-Defect Scattering journal March 2020
Lattice Softening Significantly Reduces Thermal Conductivity and Leads to High Thermoelectric Efficiency journal April 2019
Thermodynamische Eigenschaften von IV–VI-Verbindungen: Bleichalkogenide / Thermodynamic Properties of IV–VI-Compounds: Leadchalcogenides journal October 1974
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set journal October 1996
Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set journal July 1996
From ultrasoft pseudopotentials to the projector augmented-wave method journal January 1999
Projector augmented-wave method journal December 1994
Generalized Gradient Approximation Made Simple journal October 1996
Supercell program: a combinatorial structure-generation approach for the local-level modeling of atomic substitutions and partial occupancies in crystals journal March 2016