skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Exploring Oxygen Activity in the High Energy P2-Type Na0.78Ni0.23Mn0.69O2 Cathode Material for Na-Ion Batteries

Journal Article · · Journal of the American Chemical Society
DOI:https://doi.org/10.1021/jacs.7b00164· OSTI ID:1532243
 [1];  [1];  [2];  [3];  [1]; ORCiD logo [4];  [3]; ORCiD logo [1]
  1. Univ. of California, San Diego, CA (United States). Dept. of NanoEngineering
  2. Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Iowa State Univ., Ames, IA (United States)
  3. Univ. of Cambridge (United Kingdom)
  4. Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

Large-scale electric energy storage is fundamental to the use of renewable energy. Recently, research and development efforts on room-temperature sodium-ion batteries (NIBs) have been revitalized, as NIBs are considered promising, low-cost alternatives to the current Li-ion battery technology for large-scale applications. Herein, we introduce a novel layered oxide cathode material, Na0.78Ni0.23Mn0.69O2. This new compound provides a high reversible capacity of 138 mAh g-1 and an average potential of 3.25 V vs Na+/Na with a single smooth voltage profile. Its remarkable rate and cycling performances are attributed to the elimination of the P2-O2 phase transition upon cycling to 4.5 V. The first charge process yields an abnormally excess capacity, which has yet to be observed in other P2 layered oxides. Metal K-edge XANES results show that the major charge compensation at the metal site during Na-ion deintercalation is achieved via the oxidation of nickel (Ni2+) ions, whereas, to a large extent, manganese (Mn) ions remain in their Mn4+ state. Interestingly, electron energy loss spectroscopy (EELS) and soft X-ray absorption spectroscopy (sXAS) results reveal differences in electronic structures in the bulk and at the surface of electrochemically cycled particles. At the surface, transition metal ions (TM ions) are in a lower valence state than in the bulk, and the O K-edge prepeak disappears. On the basis of previous reports on related Li-excess LIB cathodes, it is proposed that part of the charge compensation mechanism during the first cycle takes place at the lattice oxygen site, resulting in a surface to bulk transition metal gradient. We believe that by optimizing and controlling oxygen activity, Na layered oxide materials with higher capacities can be designed.

Research Organization:
Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office (EE-3V); USDOE Office of Science (SC), Basic Energy Sciences (BES); National Science Foundation (NSF)
Grant/Contract Number:
AC02-05CH11231; AC02-76SF00515
OSTI ID:
1532243
Journal Information:
Journal of the American Chemical Society, Vol. 139, Issue 13; ISSN 0002-7863
Publisher:
American Chemical Society (ACS)Copyright Statement
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 303 works
Citation information provided by
Web of Science

References (61)

Building better batteries journal February 2008
A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries journal January 2015
A study of the Na x TiO2 system by electrochemical deintercalation journal January 1983
Electrochemical intercalation activity of layered NaCrO2 vs. LiCrO2 journal March 2010
Chemical and electrochemical deintercalations of the layered compounds LiMO2 (M = Cr, Co) and NaM′O2 (M′ Cr, Fe, Co, Ni) journal January 1983
In Situ X-Ray Diffraction Study of P2-Na[sub 2/3][Ni[sub 1/3]Mn[sub 2/3]]O[sub 2] journal January 2001
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage journal February 2015
NaxVO2 as possible electrode for Na-ion batteries journal September 2011
Sur quelques nouvelles phases de formule NaxMnO2 (x ⩽ 1) journal February 1971
Electronic and electrochemical properties of nickel bronze, NaxNiO2 journal April 1990
Development of High Capacity Cathode Material for Sodium Ion Batteries Na 0.95 Li 0.15 (Ni 0.15 Mn 0.55 Co 0.1 )O 2 journal January 2013
P2-type Na0.67Mn0.65Fe0.2Ni0.15O2 Cathode Material with High-capacity for Sodium-ion Battery journal January 2014
Synthesis, Structure, and Electrochemical Properties of the Layered Sodium Insertion Cathode Material: NaNi 1 / 3 Mn 1 / 3 Co 1 / 3 O 2 journal April 2012
β-NaMnO 2 : A High-Performance Cathode for Sodium-Ion Batteries journal November 2014
A preparation and polymorphic relations of sodium iron oxide (NaFeO2) journal August 1980
Structural classification and properties of the layered oxides journal January 1980
Study on the Reversible Electrode Reaction of Na 1– x Ni 0.5 Mn 0.5 O 2 for a Rechargeable Sodium-Ion Battery journal May 2012
Layered oxides as positive electrode materials for Na-ion batteries journal May 2014
Recent research progress on iron- and manganese-based positive electrode materials for rechargeable sodium batteries journal August 2014
An advanced cathode for Na-ion batteries with high rate and excellent structural stability journal January 2013
Structure of the high voltage phase of layered P2-Na 2/3−z [Mn 1/2 Fe 1/2 ]O 2 and the positive effect of Ni substitution on its stability journal January 2015
Enabling Sodium Batteries Using Lithium-Substituted Sodium Layered Transition Metal Oxide Cathodes journal February 2011
Identifying the Critical Role of Li Substitution in P2–Na x [Li y Ni z Mn 1– yz ]O 2 (0 < x , y , z < 1) Intercalation Cathode Materials for High-Energy Na-Ion Batteries journal December 2013
Recent Advances and Prospects of Cathode Materials for Sodium-Ion Batteries journal August 2015
Performance and design considerations for lithium excess layered oxide positive electrode materials for lithium ion batteries journal January 2016
Reversible anionic redox chemistry in high-capacity layered-oxide electrodes journal July 2013
High-capacity lithium insertion materials of lithium nickel manganese oxides for advanced lithium-ion batteries: toward rechargeable capacity more than 300 mA h g−1 journal January 2011
Direct observation of reversible charge compensation by oxygen ion in Li-rich manganese layered oxide positive electrode material, Li1.16Ni0.15Co0.19Mn0.50O2 journal February 2015
Charge-compensation in 3d-transition-metal-oxide intercalation cathodes through the generation of localized electron holes on oxygen journal March 2016
The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials journal May 2016
Improving Energy Density and Structural Stability of Manganese Oxide Cathodes for Na-Ion Batteries by Structural Lithium Substitution journal December 2016
New O2/P2-type Li-Excess Layered Manganese Oxides as Promising Multi-Functional Electrode Materials for Rechargeable Li/Na Batteries journal May 2014
A new electrode material for rechargeable sodium batteries: P2-type Na 2/3 [Mg 0.28 Mn 0.72 ]O 2 with anomalously high reversible capacity journal January 2014
Redox Potential Paradox in Na x MO 2 for Sodium-Ion Battery Cathodes journal February 2016
Anionic redox chemistry in Na-rich Na 2 Ru 1−y Sn y O 3 positive electrode material for Na-ion batteries journal April 2015
Intermediate honeycomb ordering to trigger oxygen redox chemistry in layered battery electrode journal April 2016
The Role of Metal Site Vacancies in Promoting Li–Mn–Ni–O Layered Solid Solutions journal June 2013
Analysis of Three-Electrode Setups for AC-Impedance Measurements on Lithium-Ion Cells by FEM simulations journal January 2011
Effect of Ni/Mn Ordering on Elementary Polarizations of LiNi 0.5 Mn 1.5 O 4 Spinel and Its Nanostructured Electrode journal January 2013
Electrochemical kinetics of the 0.5Li2MnO3·0.5LiMn0.42Ni0.42Co0.16O2 ‘composite’ layered cathode material for lithium-ion batteries journal January 2012
Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: A joint experimental and theoretical study journal January 2011
Intercalation of Water in P2, T2 and O2 Structure A z [Co x Ni 1/3- x Mn 2/3 ]O 2 journal April 2001
Electrochemical intercalation and deintercalation of NaxMnO2 bronzes journal May 1985
Direct evidence for high Na + mobility and high voltage structural processes in P2-Na x [Li y Ni z Mn 1−y−z ]O 2 (x, y, z ≤ 1) cathodes from solid-state NMR and DFT calculations journal January 2017
Detailed Studies of a High-Capacity Electrode Material for Rechargeable Batteries, Li 2 MnO 3 −LiCo 1/3 Ni 1/3 Mn 1/3 O 2 journal March 2011
High-Energy Cathode Materials (Li 2 MnO 3 –LiMO 2 ) for Lithium-Ion Batteries journal March 2013
EELS analysis of cation valence states and oxygen vacancies in magnetic oxides journal October 2000
Uncovering the roles of oxygen vacancies in cation migration in lithium excess layered oxides journal January 2014
Probing the electrode/electrolyte interface in the lithium excess layered oxide Li1.2Ni0.2Mn0.6O2 journal January 2013
Demonstrating Oxygen Loss and Associated Structural Reorganization in the Lithium Battery Cathode Li[Ni0.2Li0.2Mn0.6]O2 journal June 2006
Profiling the nanoscale gradient in stoichiometric layered cathode particles for lithium-ion batteries journal January 2014
Investigation of the Charge Compensation Mechanism on the Electrochemically Li-Ion Deintercalated Li 1 - x Co 1/3 Ni 1/3 Mn 1/3 O 2 Electrode System by Combination of Soft and Hard X-ray Absorption Spectroscopy journal December 2005
Distinct charge dynamics in battery electrodes revealed by in situ and operando soft X-ray spectroscopy journal October 2013
Splitting of Ni 3 d states at the surface of NiO nanostructures journal November 2006
Direct Experimental Probe of the Ni(II)/Ni(III)/Ni(IV) Redox Evolution in LiNi 0.5 Mn 1.5 O 4 Electrodes journal November 2015
Electrochemical and Structural Study of the Layered, “Li-Excess” Lithium-Ion Battery Electrode Material Li[Li 1/9 Ni 1/3 Mn 5/9 ]O 2 journal July 2009
Charge compensation mechanisms in Li1.16Ni0.15Co0.19Mn0.50O2 positive electrode material for Li-ion batteries analyzed by a combination of hard and soft X-ray absorption near edge structure journal January 2013
Soft X-ray Absorption Spectroscopic and Raman Studies on Li 1.2 Ni 0.2 Mn 0.6 O 2 for Lithium-Ion Batteries journal November 2012
Oxygen 1 s x-ray-absorption edges of transition-metal oxides journal September 1989
Soft X-Ray Irradiation Effects of Li2O2, Li2CO3 and Li2O Revealed by Absorption Spectroscopy journal November 2012
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries journal April 2012

Cited By (4)

The Structural Stability of P2-Layered Na-Based Electrodes during Anionic Redox journal February 2020
Rational Design of a P2-Type Spherical Layered Oxide Cathode for High-Performance Sodium-Ion Batteries journal December 2019
Coupling between oxygen redox and cation migration explains unusual electrochemistry in lithium-rich layered oxides journal December 2017
A monoclinic polymorph of sodium birnessite for ultrafast and ultrastable sodium ion storage journal November 2018

Similar Records

Elucidation of Anionic and Cationic Redox Reactions in a Prototype Sodium-Layered Oxide Cathode
Journal Article · Fri Oct 11 00:00:00 EDT 2019 · ACS Applied Materials and Interfaces · OSTI ID:1532243

Oxygen redox chemistry in P2-Na0.6Li0.11Fe0.27Mn0.62O2 cathode for high-energy Na-ion batteries
Journal Article · Fri Jan 01 00:00:00 EST 2021 · Journal of Materials Chemistry. A · OSTI ID:1532243

Structural Origins of Voltage Hysteresis in the Na-Ion Cathode P2–Na 0.67 [Mg 0.28 Mn 0.72 ]O 2 : A Combined Spectroscopic and Density Functional Theory Study
Journal Article · Mon Jun 21 00:00:00 EDT 2021 · Chemistry of Materials · OSTI ID:1532243

Related Subjects