Small scale mechanical characterization of thin foil materials via pin load microtesting
Abstract
In situ scanning electron microscope (SEM) experiments, where small-scale mechanical tests are conducted on micro- and nanosized specimens, allow direct visualization of elastic and plastic responses over the entirety of the volume being deformed. This enables precise spatial and temporal correlation of slip events contributing to the plastic flow evidenced in a stress–strain curve. A new pin-loading methodology has been employed, in situ within the SEM, to conduct microtensile tests on thin polycrystalline metal foils. This approach can be tailored to a specific foil whose particular grain size may range from microns to tens of microns. Manufacture of the specialized pin grip was accomplished via silicon photolithography-based processing followed by subsequent focused ion beam finishing. Microtensile specimen preparation was achieved by combining a stencil mask methodology employing broad ion beam sputtering along with focused ion beam milling in the study of several metallic foil materials. Finite-element analyses were performed to characterize the stress and strain distributions in the pin grip and micro-specimen under load. Furthermore, under appropriately conceived test conditions, uniaxial stress–strain responses measured within these foils by pin-load microtensile testing exhibit properties consistent with larger scale tests.
- Authors:
-
- MicroTesting Solutions LLC, Columbus, OH (United States)
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rolls Royce LG Fuel Cell Systems Inc., North Canton, OH (United States)
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Vermont, Burlington, VT (United States)
- Publication Date:
- Research Org.:
- Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States). High Temperature Materials Lab. (HTML)
- Sponsoring Org.:
- Work for Others (WFO); USDOE Office of Fossil Energy (FE)
- OSTI Identifier:
- 1331076
- Grant/Contract Number:
- AC05-00OR22725
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Experimental Mechanics
- Additional Journal Information:
- Journal Volume: 55; Journal Issue: 7; Journal ID: ISSN 0014-4851
- Publisher:
- Springer
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; pin loading; microtest; In situ characterization; micromechanical testing; SEM
Citation Formats
Wheeler, Robert, Pandey, Amit, Shyam, Amit, Tan, Ting, and Lara-Curzio, Edgar. Small scale mechanical characterization of thin foil materials via pin load microtesting. United States: N. p., 2015.
Web. doi:10.1007/s11340-015-0020-6.
Wheeler, Robert, Pandey, Amit, Shyam, Amit, Tan, Ting, & Lara-Curzio, Edgar. Small scale mechanical characterization of thin foil materials via pin load microtesting. United States. https://doi.org/10.1007/s11340-015-0020-6
Wheeler, Robert, Pandey, Amit, Shyam, Amit, Tan, Ting, and Lara-Curzio, Edgar. Wed .
"Small scale mechanical characterization of thin foil materials via pin load microtesting". United States. https://doi.org/10.1007/s11340-015-0020-6. https://www.osti.gov/servlets/purl/1331076.
@article{osti_1331076,
title = {Small scale mechanical characterization of thin foil materials via pin load microtesting},
author = {Wheeler, Robert and Pandey, Amit and Shyam, Amit and Tan, Ting and Lara-Curzio, Edgar},
abstractNote = {In situ scanning electron microscope (SEM) experiments, where small-scale mechanical tests are conducted on micro- and nanosized specimens, allow direct visualization of elastic and plastic responses over the entirety of the volume being deformed. This enables precise spatial and temporal correlation of slip events contributing to the plastic flow evidenced in a stress–strain curve. A new pin-loading methodology has been employed, in situ within the SEM, to conduct microtensile tests on thin polycrystalline metal foils. This approach can be tailored to a specific foil whose particular grain size may range from microns to tens of microns. Manufacture of the specialized pin grip was accomplished via silicon photolithography-based processing followed by subsequent focused ion beam finishing. Microtensile specimen preparation was achieved by combining a stencil mask methodology employing broad ion beam sputtering along with focused ion beam milling in the study of several metallic foil materials. Finite-element analyses were performed to characterize the stress and strain distributions in the pin grip and micro-specimen under load. Furthermore, under appropriately conceived test conditions, uniaxial stress–strain responses measured within these foils by pin-load microtensile testing exhibit properties consistent with larger scale tests.},
doi = {10.1007/s11340-015-0020-6},
journal = {Experimental Mechanics},
number = 7,
volume = 55,
place = {United States},
year = {Wed May 06 00:00:00 EDT 2015},
month = {Wed May 06 00:00:00 EDT 2015}
}
Web of Science
Works referenced in this record:
Simultaneously Increasing the Ductility and Strength of Ultra-Fine-Grained Pure Copper
journal, November 2006
- Zhao, Y. -H.; Bingert, J. F.; Liao, X. -Z.
- Advanced Materials, Vol. 18, Issue 22
Plasticity in Confined Dimensions
journal, June 2010
- Kraft, Oliver; Gruber, Patric A.; Mönig, Reiner
- Annual Review of Materials Research, Vol. 40, Issue 1
In-Situ Mechanical Testing for Characterizing Strain Localization During Deformation at Elevated Temperatures
journal, May 2011
- Walley, J. L.; Wheeler, R.; Uchic, M. D.
- Experimental Mechanics, Vol. 52, Issue 4
A combined experimental and simulation study to examine lateral constraint effects on microcompression of single-slip oriented single crystals
journal, September 2009
- Shade, P. A.; Wheeler, R.; Choi, Y. S.
- Acta Materialia, Vol. 57, Issue 15
Application of micro-sample testing to study fundamental aspects of plastic flow
journal, March 2006
- Uchic, Michael D.; Dimiduk, Dennis M.; Wheeler, Robert
- Scripta Materialia, Vol. 54, Issue 5
Small-scale patterning methods for digital image correlation under scanning electron microscopy
journal, October 2011
- Kammers, A. D.; Daly, S.
- Measurement Science and Technology, Vol. 22, Issue 12
Elastic Properties of Metals and Alloys. II. Copper
journal, October 1974
- Ledbetter, H. M.; Naimon, E. R.
- Journal of Physical and Chemical Reference Data, Vol. 3, Issue 4
Microscale Characterization of Mechanical Properties
journal, August 2007
- Hemker, K. J.; Sharpe, W. N.
- Annual Review of Materials Research, Vol. 37, Issue 1
Insights Gained Through Image Analysis During In Situ Micromechanical Experiments
journal, January 2012
- Wheeler, R.; Shade, P. A.; Uchic, M. D.
- JOM, Vol. 64, Issue 1
Femtosecond laser micromachining of a single-crystal superalloy
journal, September 2005
- Feng, Q.; Picard, Y. N.; Liu, H.
- Scripta Materialia, Vol. 53, Issue 5
Micro- and nanoscale tensile testing of materials
journal, March 2009
- Gianola, D. S.; Eberl, C.
- JOM, Vol. 61, Issue 3
Materials processing for lithium-ion batteries
journal, March 2011
- Li, Jianlin; Daniel, Claus; Wood, David
- Journal of Power Sources, Vol. 196, Issue 5, p. 2452-2460
A further step towards an understanding of size-dependent crystal plasticity: In situ tension experiments of miniaturized single-crystal copper samples
journal, February 2008
- Kiener, D.; Grosinger, W.; Dehm, G.
- Acta Materialia, Vol. 56, Issue 3
Stencil mask methodology for the parallelized production of microscale mechanical test samples
journal, May 2012
- Shade, Paul A.; Kim, Sang-Lan; Wheeler, Robert
- Review of Scientific Instruments, Vol. 83, Issue 5
Silicon as a mechanical material
journal, May 1982
- Petersen, K. E.
- Proceedings of the IEEE, Vol. 70, Issue 5
Tensile Strength of Whiskers
journal, December 1956
- Brenner, S. S.
- Journal of Applied Physics, Vol. 27, Issue 12
Quantitative In Situ Mechanical Testing in Electron Microscopes
journal, May 2010
- Legros, M.; Gianola, D. S.; Motz, C.
- MRS Bulletin, Vol. 35, Issue 5
Mechanical properties of thin films
journal, November 1989
- Nix, William D.
- Metallurgical Transactions A, Vol. 20, Issue 11
In-situ tensile testing of nano-scale specimens in SEM and TEM
journal, March 2002
- Haque, M. A.; Saif, M. T. A.
- Experimental Mechanics, Vol. 42, Issue 1
What is the Young's Modulus of Silicon?
journal, April 2010
- Hopcroft, Matthew A.; Nix, William D.; Kenny, Thomas W.
- Journal of Microelectromechanical Systems, Vol. 19, Issue 2
Mechanical Properties of Thin Films
journal, August 1990
- Alexopoulos, P. S.; O'Sullivan, T. C.
- Annual Review of Materials Science, Vol. 20, Issue 1
Works referencing / citing this record:
On the Application of Xe+ Plasma FIB for Micro-fabrication of Small-scale Tensile Specimens
journal, July 2019
- Smith, A. D.; Donoghue, J.; Garner, A.
- Experimental Mechanics, Vol. 59, Issue 8
Novel Methods for Recording Stress-Strain Curves in Proton Irradiated Material
journal, March 2020
- Smith, Albert D.; Donoghue, Jack M.; Garner, Alistair J. W.
- Scientific Reports, Vol. 10, Issue 1