Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Abstract
HHigh-entropy alloys (HEAs), also known as multi-principal element alloys or multi-component alloys, have been the subject of numerous investigations since they were first described in 2004. The earliest HEA was the equiatomic CrMnFeCoNi “Cantor” alloy, but HEAs now encompass a broad class of metallic and ceramic systems. The concept of utilizing the high entropy of mixing to develop stable multi-element alloys may not be scientifically correct but has produced extraordinary mechanical properties in specific HEAs, mainly CrCoNi-based alloys, associated with their continuous work-hardening rate that is sustained to large plastic strains (~0.5) and at low temperatures. This, in combination with the high frictional forces on dislocations and a propensity for twinning, leads to outstandingly high fracture toughness values (exceeding 200 MPa·m1/2) and resistance to shear-band formation under dynamic loading. The critical shear strain for the onset of adiabatic shear band formation is ~7 for the Cantor alloy, much higher than that for conventional alloys, suggesting superior ballistic properties. The slower diffusion rates resulting from the multi-element environment contribute to the excellent intermediate-temperature performance. We review the principal mechanical properties of these alloys with emphasis on the face-centered cubic systems, such as the CrCoNi-based alloys. Their favorable mechanical properties and easemore »
- Authors:
-
- Univ. of California, San Diego, CA (United States)
- Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Univ. of California, Berkeley, CA (United States)
- Publication Date:
- Research Org.:
- Univ. of California, San Diego, CA (United States)
- Sponsoring Org.:
- USDOE National Nuclear Security Administration (NNSA); USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22). Materials Sciences & Engineering Division
- OSTI Identifier:
- 1634203
- Alternate Identifier(s):
- OSTI ID: 1636758
- Grant/Contract Number:
- NA0003842; NA0002080; AC02-05CH11231
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Progress in Materials Science
- Additional Journal Information:
- Journal Volume: 102; Journal Issue: C; Journal ID: ISSN 0079-6425
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; mechanical properties; high-entropy alloys; fracture; fatigue; dynamic behavior
Citation Formats
Li, Zezhou, Zhao, Shiteng, Ritchie, Robert O., and Meyers, Marc A. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys. United States: N. p., 2018.
Web. doi:10.1016/j.pmatsci.2018.12.003.
Li, Zezhou, Zhao, Shiteng, Ritchie, Robert O., & Meyers, Marc A. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys. United States. https://doi.org/10.1016/j.pmatsci.2018.12.003
Li, Zezhou, Zhao, Shiteng, Ritchie, Robert O., and Meyers, Marc A. Tue .
"Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys". United States. https://doi.org/10.1016/j.pmatsci.2018.12.003. https://www.osti.gov/servlets/purl/1634203.
@article{osti_1634203,
title = {Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys},
author = {Li, Zezhou and Zhao, Shiteng and Ritchie, Robert O. and Meyers, Marc A.},
abstractNote = {HHigh-entropy alloys (HEAs), also known as multi-principal element alloys or multi-component alloys, have been the subject of numerous investigations since they were first described in 2004. The earliest HEA was the equiatomic CrMnFeCoNi “Cantor” alloy, but HEAs now encompass a broad class of metallic and ceramic systems. The concept of utilizing the high entropy of mixing to develop stable multi-element alloys may not be scientifically correct but has produced extraordinary mechanical properties in specific HEAs, mainly CrCoNi-based alloys, associated with their continuous work-hardening rate that is sustained to large plastic strains (~0.5) and at low temperatures. This, in combination with the high frictional forces on dislocations and a propensity for twinning, leads to outstandingly high fracture toughness values (exceeding 200 MPa·m1/2) and resistance to shear-band formation under dynamic loading. The critical shear strain for the onset of adiabatic shear band formation is ~7 for the Cantor alloy, much higher than that for conventional alloys, suggesting superior ballistic properties. The slower diffusion rates resulting from the multi-element environment contribute to the excellent intermediate-temperature performance. We review the principal mechanical properties of these alloys with emphasis on the face-centered cubic systems, such as the CrCoNi-based alloys. Their favorable mechanical properties and ease of processing by conventional means suggest extensive utilization in many future structural applications.},
doi = {10.1016/j.pmatsci.2018.12.003},
journal = {Progress in Materials Science},
number = C,
volume = 102,
place = {United States},
year = {Tue Dec 18 00:00:00 EST 2018},
month = {Tue Dec 18 00:00:00 EST 2018}
}
Web of Science
Works referenced in this record:
The conflicts between strength and toughness
journal, October 2011
- Ritchie, Robert O.
- Nature Materials, Vol. 10, Issue 11
Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes
journal, May 2004
- Yeh, J.-W.; Chen, S.-K.; Lin, S.-J.
- Advanced Engineering Materials, Vol. 6, Issue 5, p. 299-303
Microstructural development in equiatomic multicomponent alloys
journal, July 2004
- Cantor, B.; Chang, I. T. H.; Knight, P.
- Materials Science and Engineering: A, Vol. 375-377
Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures
journal, June 2016
- Otto, F.; Dlouhý, A.; Pradeep, K. G.
- Acta Materialia, Vol. 112
A critical review of high entropy alloys and related concepts
journal, January 2017
- Miracle, D. B.; Senkov, O. N.
- Acta Materialia, Vol. 122
Exploration and Development of High Entropy Alloys for Structural Applications
journal, January 2014
- Miracle, Daniel; Miller, Jonathan; Senkov, Oleg
- Entropy, Vol. 16, Issue 1
Entropy-stabilized oxides
journal, September 2015
- Rost, Christina M.; Sachet, Edward; Borman, Trent
- Nature Communications, Vol. 6, Issue 1
High-Entropy Metal Diborides: A New Class of High-Entropy Materials and a New Type of Ultrahigh Temperature Ceramics
journal, November 2016
- Gild, Joshua; Zhang, Yuanyao; Harrington, Tyler
- Scientific Reports, Vol. 6, Issue 1
A new class of high-entropy perovskite oxides
journal, January 2018
- Jiang, Sicong; Hu, Tao; Gild, Joshua
- Scripta Materialia, Vol. 142
Novel Multicomponent Amorphous Alloys
journal, January 2002
- Cantor, Brian; Kim, K. B.; Warren, Paul J.
- Materials Science Forum, Vol. 386-388
A fracture-resistant high-entropy alloy for cryogenic applications
journal, September 2014
- Gludovatz, B.; Hohenwarter, A.; Catoor, D.
- Science, Vol. 345, Issue 6201
Mechanism of Radiation Damage Reduction in Equiatomic Multicomponent Single Phase Alloys
journal, April 2016
- Granberg, F.; Nordlund, K.; Ullah, Mohammad W.
- Physical Review Letters, Vol. 116, Issue 13
Microstructures and properties of high-entropy alloys
journal, April 2014
- Zhang, Yong; Zuo, Ting Ting; Tang, Zhi
- Progress in Materials Science, Vol. 61
High-Entropy Alloys: A Critical Review
journal, April 2014
- Tsai, Ming-Hung; Yeh, Jien-Wei
- Materials Research Letters, Vol. 2, Issue 3
Thermal potential, mechanical instability, and melting entropy
journal, May 1982
- Ruffa, A. R.
- Physical Review B, Vol. 25, Issue 9
Thermodynamics of Solids
journal, October 1962
- Swalin, R. A.; King, Allen L.
- American Journal of Physics, Vol. 30, Issue 10
Einstein before 1905: The early papers on statistical mechanics
journal, May 1990
- Gearhart, Clayton A.
- American Journal of Physics, Vol. 58, Issue 5
High-Entropy Alloys – A New Era of Exploitation
journal, November 2007
- Yeh, Jien Wei; Chen, Yu Liang; Lin, Su Jien
- Materials Science Forum, Vol. 560
Calculations of Mixing Enthalpy and Mismatch Entropy for Ternary Amorphous Alloys
journal, January 2000
- Takeuchi, Akira; Inoue, Akihisa
- Materials Transactions, JIM, Vol. 41, Issue 11
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
journal, April 2013
- Otto, F.; Yang, Y.; Bei, H.
- Acta Materialia, Vol. 61, Issue 7
Lattice strain framework for plastic deformation in complex concentrated alloys including high entropy alloys
journal, March 2015
- Mishra, R. S.; Kumar, N.; Komarasamy, M.
- Materials Science and Technology, Vol. 31, Issue 10
Anomalous decrease in X-ray diffraction intensities of Cu–Ni–Al–Co–Cr–Fe–Si alloy systems with multi-principal elements
journal, May 2007
- Yeh, Jien-Wei; Chang, Shou-Yi; Hong, Yu-Der
- Materials Chemistry and Physics, Vol. 103, Issue 1
Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography
journal, July 2013
- Pradeep, K. G.; Wanderka, N.; Choi, P.
- Acta Materialia, Vol. 61, Issue 12
Strain mapping at nanometer resolution using advanced nano-beam electron diffraction
journal, June 2015
- Ozdol, V. B.; Gammer, C.; Jin, X. G.
- Applied Physics Letters, Vol. 106, Issue 25
Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys
journal, August 2018
- Ding, Jun; Yu, Qin; Asta, Mark
- Proceedings of the National Academy of Sciences, Vol. 115, Issue 36
Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi
journal, April 2017
- Laplanche, G.; Kostka, A.; Reinhart, C.
- Acta Materialia, Vol. 128
Local Structure and Short-Range Order in a NiCoCr Solid Solution Alloy
journal, May 2017
- Zhang, F. X.; Zhao, Shijun; Jin, Ke
- Physical Review Letters, Vol. 118, Issue 20
Chemical short-range orders and the induced structural transition in high-entropy alloys
journal, February 2018
- Ma, Yue; Wang, Qing; Li, Chunling
- Scripta Materialia, Vol. 144
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
journal, November 2018
- Lei, Zhifeng; Liu, Xiongjun; Wu, Yuan
- Nature, Vol. 563, Issue 7732
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
journal, August 2013
- Tsai, K. -Y.; Tsai, M. -H.; Yeh, J. -W.
- Acta Materialia, Vol. 61, Issue 13
The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys
journal, March 2017
- Zhang, Y. H.; Zhuang, Y.; Hu, A.
- Scripta Materialia, Vol. 130
Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys
journal, May 2016
- Lee, Dong-Hyun; Seok, Moo-Young; Zhao, Yakai
- Acta Materialia, Vol. 109
Phase selection rules for cast high entropy alloys: an overview
journal, February 2015
- Guo, S.
- Materials Science and Technology, Vol. 31, Issue 10
More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase
journal, October 2013
- Guo, Sheng; Hu, Qiang; Ng, Chun
- Intermetallics, Vol. 41
Solid-Solution Phase Formation Rules for Multi-component Alloys
journal, June 2008
- Zhang, Y.; Zhou, Y. J.; Lin, J. P.
- Advanced Engineering Materials, Vol. 10, Issue 6, p. 534-538
Prediction of high-entropy stabilized solid-solution in multi-component alloys
journal, February 2012
- Yang, X.; Zhang, Y.
- Materials Chemistry and Physics, Vol. 132, Issue 2-3
Alloy Design and Properties Optimization of High-Entropy Alloys
journal, July 2012
- Zhang, Y.; Yang, X.; Liaw, P. K.
- JOM, Vol. 64, Issue 7
ABO3-type oxides—Their structure and properties—A bird's eye view
journal, December 1978
- Ramadass, N.
- Materials Science and Engineering, Vol. 36, Issue 2
High-entropy alloy: challenges and prospects
journal, July 2016
- Ye, Y. F.; Wang, Q.; Lu, J.
- Materials Today, Vol. 19, Issue 6
Accelerated exploration of multi-principal element alloys with solid solution phases
journal, March 2015
- Senkov, O. N.; Miller, J. D.; Miracle, D. B.
- Nature Communications, Vol. 6, Issue 1
Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy
journal, January 2015
- Santodonato, Louis J.; Zhang, Yang; Feygenson, Mikhail
- Nature Communications, Vol. 6, Issue 1
A Bragg–Williams model for the thermodynamic activity and the thermodynamic factor in diffusion for ordered alloys with substitutional defects
journal, November 1998
- Ikeda, T.; Numakura, H.; Koiwa, M.
- Acta Materialia, Vol. 46, Issue 18
Microstructure and mechanical properties of twinned Al0.5CrFeNiCo0.3C0.2 high entropy alloy processed by mechanical alloying and spark plasma sintering
journal, February 2014
- Fang, Sicong; Chen, Weiping; Fu, Zhiqiang
- Materials & Design (1980-2015), Vol. 54
Development of a Novel Melt Spinning-Based Processing Route for Oxide Dispersion-Strengthened Steels
journal, December 2017
- Hong, Zuliang; Morrison, Alasdair P. C.; Zhang, Hongtao
- Metallurgical and Materials Transactions A, Vol. 49, Issue 2
Processing, Microstructure and Mechanical Properties of the CrMnFeCoNi High-Entropy Alloy
journal, August 2015
- Gludovatz, Bernd; George, Easo P.; Ritchie, Robert O.
- JOM, Vol. 67, Issue 10
Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy
journal, February 2015
- Laplanche, G.; Gadaud, P.; Horst, O.
- Journal of Alloys and Compounds, Vol. 623
Polycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures
journal, March 2015
- Haglund, A.; Koehler, M.; Catoor, D.
- Intermetallics, Vol. 58
Temperature Dependence of the Elastic Constants
journal, November 1970
- Varshni, Y. P.
- Physical Review B, Vol. 2, Issue 10
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
journal, December 2014
- Wu, Z.; Bei, H.; Pharr, G. M.
- Acta Materialia, Vol. 81
Plastic deformation of nickel single crystals at low temperatures
journal, April 1958
- Haasen, Peter
- Philosophical Magazine, Vol. 3, Issue 28
Elastic Properties of Metals and Alloys, I. Iron, Nickel, and Iron‐Nickel Alloys
journal, July 1973
- Ledbetter, H. M.; Reed, R. P.
- Journal of Physical and Chemical Reference Data, Vol. 2, Issue 3
Slip nucleation in single crystal FeNiCoCrMn high entropy alloy
journal, February 2016
- Patriarca, L.; Ojha, A.; Sehitoglu, H.
- Scripta Materialia, Vol. 112
The temperature dependence of the critical shear stress and of work-hardening of metal crystals
journal, July 1954
- Seeger, Alfred
- The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, Vol. 45, Issue 366
Thermal activation parameters of plastic flow reveal deformation mechanisms in the CrMnFeCoNi high-entropy alloy
journal, January 2018
- Laplanche, G.; Bonneville, J.; Varvenne, C.
- Acta Materialia, Vol. 143
First-principles prediction of yield stress for basal slip in Mg–Al alloys
journal, August 2012
- Leyson, G. P. M.; Hector, L. G.; Curtin, W. A.
- Acta Materialia, Vol. 60, Issue 13-14
Solute strengthening from first principles and application to aluminum alloys
journal, May 2012
- Leyson, G. P. M.; Hector, L. G.; Curtin, W. A.
- Acta Materialia, Vol. 60, Issue 9
Solute strengthening in random alloys
journal, February 2017
- Varvenne, C.; Leyson, G. P. M.; Ghazisaeidi, M.
- Acta Materialia, Vol. 124
Cross-slipping process and the stress-orientation dependence in pure copper
journal, September 1979
- Bonneville, J.; Escaig, B.
- Acta Metallurgica, Vol. 27, Issue 9
Stress dependence of cross slip energy barrier for face-centered cubic nickel
journal, January 2014
- Kang, Keonwook; Yin, Jie; Cai, Wei
- Journal of the Mechanics and Physics of Solids, Vol. 62
Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
journal, September 2015
- Schuh, B.; Mendez-Martin, F.; Völker, B.
- Acta Materialia, Vol. 96
Enhanced hardness and fracture toughness of the laser-solidified FeCoNiCrCuTiMoAlSiB0.5 high-entropy alloy by martensite strengthening
journal, August 2013
- Zhang, Hui; He, Yizhu; Pan, Ye
- Scripta Materialia, Vol. 69, Issue 4
Fundamental deformation behavior in high-entropy alloys: An overview
journal, October 2017
- Diao, H. Y.; Feng, R.; Dahmen, K. A.
- Current Opinion in Solid State and Materials Science, Vol. 21, Issue 5
The contributions of David Tabor to the science of indentation hardness
journal, March 2009
- Hutchings, Ian M.
- Journal of Materials Research, Vol. 24, Issue 3
A Novel Low-Density, High-Hardness, High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures
journal, December 2014
- Youssef, Khaled M.; Zaddach, Alexander J.; Niu, Changning
- Materials Research Letters, Vol. 3, Issue 2
Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
journal, April 2013
- Liu, W. H.; Wu, Y.; He, J. Y.
- Scripta Materialia, Vol. 68, Issue 7
Recrystallization and grain growth
journal, January 1952
- Burke, J. E.; Turnbull, D.
- Progress in Metal Physics, Vol. 3
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
journal, September 2013
- Otto, F.; Dlouhý, A.; Somsen, Ch.
- Acta Materialia, Vol. 61, Issue 15
Mechanical properties of nanocrystalline materials
journal, May 2006
- Meyers, M. A.; Mishra, A.; Benson, D. J.
- Progress in Materials Science, Vol. 51, Issue 4
“Bulk” Nanocrystalline Metals: Review of the Current State of the Art and Future Opportunities for Copper and Copper Alloys
journal, May 2014
- Tschopp, M. A.; Murdoch, H. A.; Kecskes, L. J.
- JOM, Vol. 66, Issue 6
Mechanical properties in tension of mechanically attrited nanocrystalline iron by the use of the miniaturized disk bend test
journal, November 1998
- Malow, T. R.; Koch, C. C.
- Acta Materialia, Vol. 46, Issue 18
A model for the effect of grain size on the yield stress of metals
journal, November 1982
- Meyersm, Marc A.; Ashworth, E.
- Philosophical Magazine A, Vol. 46, Issue 5
Grain size dependence of the plastic deformation kinetics in Cu
journal, January 2003
- Conrad, Hans
- Materials Science and Engineering: A, Vol. 341, Issue 1-2
Microscopic description of plasticity in computer generated metallic nanophase samples: a comparison between Cu and Ni
journal, August 1999
- Van Swygenhoven, H.; Spaczer, M.; Caro, A.
- Acta Materialia, Vol. 47, Issue 10
Mechanical properties of ultra fine grained steels
journal, November 2001
- Takaki, Setsuo; Kawasaki, Kenji; Kimura, Yuji
- Journal of Materials Processing Technology, Vol. 117, Issue 3
Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy
journal, April 2016
- Fu, Zhiqiang; Chen, Weiping; Wen, Haiming
- Acta Materialia, Vol. 107
Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
journal, September 2011
- Chuang, Ming-Hao; Tsai, Ming-Hung; Wang, Woei-Ren
- Acta Materialia, Vol. 59, Issue 16
On dislocation accumulation and work hardening in Hadfield steel
journal, August 2006
- Hutchinson, Bevis; Ridley, Norman
- Scripta Materialia, Vol. 55, Issue 4
Tensile ductility of nanotwinned austenitic grains in an austenitic steel
journal, August 2014
- Yan, F. K.; Tao, N. R.; Lu, K.
- Scripta Materialia, Vol. 84-85
Strain hardening rate sensitivity and strain rate sensitivity in TWIP steels
journal, April 2015
- Bintu, Alexandra; Vincze, Gabriela; Picu, Catalin R.
- Materials Science and Engineering: A, Vol. 629
Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels
journal, August 2004
- Byun, T. S.; Hashimoto, N.; Farrell, K.
- Acta Materialia, Vol. 52, Issue 13
Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments
journal, January 2013
- Steinmetz, David R.; Jäpel, Tom; Wietbrock, Burkhard
- Acta Materialia, Vol. 61, Issue 2
High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure
journal, February 2017
- Li, Z.; Zhao, S.; Diao, H.
- Scientific Reports, Vol. 7, Issue 1
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
journal, May 2016
- Li, Zhiming; Pradeep, Konda Gokuldoss; Deng, Yun
- Nature, Vol. 534, Issue 7606
From High-Entropy Alloys to High-Entropy Steels
journal, July 2015
- Raabe, Dierk; Tasan, Cemal Cem; Springer, Hauke
- steel research international, Vol. 86, Issue 10
Superplastic Extensibility of Nanocrystalline Copper at Room Temperature
journal, February 2000
- Lu, L.
- Science, Vol. 287, Issue 5457
Ultrahigh Strength and High Electrical Conductivity in Copper
journal, April 2004
- Lu, L.
- Science, Vol. 304, Issue 5669
Revealing the Maximum Strength in Nanotwinned Copper
journal, January 2009
- Lu, L.; Chen, X.; Huang, X.
- Science, Vol. 323, Issue 5914
Making strong nanomaterials ductile with gradients
journal, September 2014
- Lu, K.
- Science, Vol. 345, Issue 6203
Stabilizing nanostructures in metals using grain and twin boundary architectures
journal, March 2016
- Lu, K.
- Nature Reviews Materials, Vol. 1, Issue 5
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
journal, November 2018
- Yang, T.; Zhao, Y. L.; Tong, Y.
- Science, Vol. 362, Issue 6417
Strengthening Mechanisms in γ′ Precipitating Alloys
journal, January 1970
- Raynor, D.; Silcock, J. M.
- Metal Science Journal, Vol. 4, Issue 1
Mechanism of work hardening in Hadfield manganese steel
journal, May 1981
- Dastur, Y. N.; Leslie, W. C.
- Metallurgical Transactions A, Vol. 12, Issue 5
Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity
journal, September 2017
- Li, Zhiming; Körmann, Fritz; Grabowski, Blazej
- Acta Materialia, Vol. 136
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
journal, September 2011
- Gutierrez-Urrutia, I.; Raabe, D.
- Acta Materialia, Vol. 59, Issue 16
Microstructure and tensile behaviors of FCC Al0.3CoCrFeNi high entropy alloy
journal, June 2009
- Shun, Tao-Tsung; Du, Yu-Chin
- Journal of Alloys and Compounds, Vol. 479, Issue 1-2
A precipitation-hardened high-entropy alloy with outstanding tensile properties
journal, January 2016
- He, J. Y.; Wang, H.; Huang, H. L.
- Acta Materialia, Vol. 102
Theory of strengthening in fcc high entropy alloys
journal, October 2016
- Varvenne, Céline; Luque, Aitor; Curtin, William A.
- Acta Materialia, Vol. 118
Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy
journal, February 2017
- Zhang, Zijiao; Sheng, Hongwei; Wang, Zhangjie
- Nature Communications, Vol. 8, Issue 1
The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: Deformation twinning, work hardening, and dynamic recovery
journal, January 2001
- Rohatgi, Aashish; Vecchio, Kenneth S.; Gray, George T.
- Metallurgical and Materials Transactions A, Vol. 32, Issue 1
Deformation Substructures and Their Transitions in Laser Shock–Compressed Copper-Aluminum Alloys
journal, December 2007
- Meyers, M. A.; Schneider, M. S.; Jarmakani, H.
- Metallurgical and Materials Transactions A, Vol. 39, Issue 2
Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy
journal, October 2013
- Zaddach, A. J.; Niu, C.; Koch, C. C.
- JOM, Vol. 65, Issue 12
Relationship between stacking‐fault energy and x‐ray measurements of stacking‐fault probability and microstrain
journal, November 1974
- Reed, R. P.; Schramm, R. E.
- Journal of Applied Physics, Vol. 45, Issue 11
Stacking fault energies of fcc fe-Ni alloys by x-ray diffraction line profile analysis
journal, March 1976
- Schramm, Raymond E.; Reed, Richard P.
- Metallurgical Transactions A, Vol. 7, Issue 3
Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy
journal, November 2015
- Huang, Shuo; Li, Wei; Lu, Song
- Scripta Materialia, Vol. 108
Atomic-scale characterization and modeling of 60° dislocations in a high-entropy alloy
journal, May 2016
- Smith, T. M.; Hooshmand, M. S.; Esser, B. D.
- Acta Materialia, Vol. 110
Microstructural evolution of a CoCrFeMnNi high-entropy alloy after swaging and annealing
journal, October 2015
- Laplanche, G.; Horst, O.; Otto, F.
- Journal of Alloys and Compounds, Vol. 647
The onset of twinning in metals: a constitutive description
journal, November 2001
- Meyers, M. A.; Vöhringer, O.; Lubarda, V. A.
- Acta Materialia, Vol. 49, Issue 19
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
journal, October 2016
- Laplanche, G.; Kostka, A.; Horst, O. M.
- Acta Materialia, Vol. 118
Dislocation‐mechanics‐based constitutive relations for material dynamics calculations
journal, March 1987
- Zerilli, Frank J.; Armstrong, Ronald W.
- Journal of Applied Physics, Vol. 61, Issue 5
Mechanical Properties and Microstructure of the CoCrFeMnNi High Entropy Alloy Under High Strain Rate Compression
journal, May 2016
- Wang, Bingfeng; Fu, Ao; Huang, Xiaoxia
- Journal of Materials Engineering and Performance, Vol. 25, Issue 7
The effect of dislocation drag on the stress-strain behavior of F.C.C. metals
journal, August 1992
- Zerilli, F. J.; Armstrong, R. W.
- Acta Metallurgica et Materialia, Vol. 40, Issue 8
Deformation twinning
journal, January 1995
- Christian, J. W.; Mahajan, S.
- Progress in Materials Science, Vol. 39, Issue 1-2
Deformation twinning in nanocrystalline materials
journal, January 2012
- Zhu, Y. T.; Liao, X. Z.; Wu, X. L.
- Progress in Materials Science, Vol. 57, Issue 1
A dislocation model for twinning in f.c.c. metals
journal, August 1963
- Cohen, J. B.; Weertman, J.
- Acta Metallurgica, Vol. 11, Issue 8
Twin boundary: Controllable interface to fatigue cracking
journal, July 2017
- Zhang, Zhefeng; Li, Linlin; Zhang, Zhenjun
- Journal of Materials Science & Technology, Vol. 33, Issue 7
A model for the formation of annealing twins in F.C.C. metals and alloys
journal, June 1978
- Meyers, Marc A.; Murr, Lawrence E.
- Acta Metallurgica, Vol. 26, Issue 6
On macroscopic and microscopic analyses for crack initiation and crack growth toughness in ductile alloys
journal, February 1985
- Ritchie, R. O.; Thompson, A. W.
- Metallurgical Transactions A, Vol. 16, Issue 2
Some remarks on elastic crack-tip stress fields
journal, June 1972
- Rice, James R.
- International Journal of Solids and Structures, Vol. 8, Issue 6
Relationships between the J-integral and the crack opening displacement for stationary and extending cracks
journal, August 1981
- Shih, C. F.
- Journal of the Mechanics and Physics of Solids, Vol. 29, Issue 4
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
journal, February 2016
- Gludovatz, Bernd; Hohenwarter, Anton; Thurston, Keli V. S.
- Nature Communications, Vol. 7, Issue 1
A refractory Hf25Nb25Ti25Zr25 high-entropy alloy with excellent structural stability and tensile properties
journal, September 2014
- Wu, Y. D.; Cai, Y. H.; Wang, T.
- Materials Letters, Vol. 130
Influence of microstructure on near-threshold fatigue-crack propagation in ultra-high strength steel
journal, August 1977
- Ritchie, R. O.
- Metal Science, Vol. 11, Issue 8-9
Fracture Toughness and Fatigue Crack Growth Behavior of As-Cast High-Entropy Alloys
journal, August 2015
- Seifi, Mohsen; Li, Dongyue; Yong, Zhang
- JOM, Vol. 67, Issue 10
Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi
journal, September 2017
- Thurston, Keli V. S.; Gludovatz, Bernd; Hohenwarter, Anton
- Intermetallics, Vol. 88
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
journal, September 2012
- Hemphill, M. A.; Yuan, T.; Wang, G. Y.
- Acta Materialia, Vol. 60, Issue 16
Dynamic strain aging of Al 0.3 CoCrFeNi high entropy alloy single crystals
journal, November 2015
- Yasuda, Hiroyuki Y.; Shigeno, Kyosuke; Nagase, Takeshi
- Scripta Materialia, Vol. 108
New observations on the mechanisms of dynamic strain aging and of jerky flow
journal, July 1979
- Mulford, R. A.; Kocks, U. F.
- Acta Metallurgica, Vol. 27, Issue 7
Serration behavior and negative strain rate sensitivity of Al0.1CoCrFeNi high entropy alloy
journal, May 2017
- Komarasamy, Mageshwari; Alagarsamy, Karthik; Mishra, Rajiv S.
- Intermetallics, Vol. 84
A Portevin-Le Chatelier effect expected from solute atmosphere dragging
journal, June 1971
- Yoshinaga, H.; Morozumi, S.
- The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, Vol. 23, Issue 186
Dynamic strain aging studied at the atomic scale
journal, March 2015
- Aboulfadl, H.; Deges, J.; Choi, P.
- Acta Materialia, Vol. 86
Serration and noise behaviors in materials
journal, October 2017
- Zhang, Yong; Liu, Jun Peng; Chen, Shu Ying
- Progress in Materials Science, Vol. 90
Experiments and Model for Serration Statistics in Low-Entropy, Medium-Entropy and High-Entropy Alloys
journal, November 2015
- Carroll, Robert; Lee, Chi; Tsai, Che-Wei
- Scientific Reports, Vol. 5, Issue 1
Dislocation Theory of Yielding and Strain Ageing of Iron
journal, January 1949
- Cottrell, A. H.; Bilby, B. A.
- Proceedings of the Physical Society. Section A, Vol. 62, Issue 1
Refractory high-entropy alloys
journal, September 2010
- Senkov, O. N.; Wilks, G. B.; Miracle, D. B.
- Intermetallics, Vol. 18, Issue 9
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
journal, May 2011
- Senkov, O. N.; Wilks, G. B.; Scott, J. M.
- Intermetallics, Vol. 19, Issue 5
A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys
journal, August 2014
- Lu, Yiping; Dong, Yong; Guo, Sheng
- Scientific Reports, Vol. 4, Issue 1
Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys
journal, April 2014
- Senkov, O. N.; Senkova, S. V.; Woodward, C.
- Acta Materialia, Vol. 68
Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys
journal, March 2015
- Gorr, B.; Azim, M.; Christ, H. -J.
- Journal of Alloys and Compounds, Vol. 624
A first report on deformation-mechanism maps
journal, July 1972
- Ashby, M. F.
- Acta Metallurgica, Vol. 20, Issue 7
A simple method of constructing an Ashby-type deformation mechanism map
journal, June 1978
- Langdon, Terence G.; Mohamed, Farghalli A.
- Journal of Materials Science, Vol. 13, Issue 6
Dislocation creep behavior of CoCrFeMnNi high entropy alloy at intermediate temperatures
journal, November 2018
- Kang, You Bin; Shim, Sang Hoon; Lee, Kap Ho
- Materials Research Letters, Vol. 6, Issue 12
Dependence of Creep Rate on Porosity
journal, December 1972
- Langdon, Terence G.
- Journal of the American Ceramic Society, Vol. 55, Issue 12
Lattice and Grain Boundary Self‐Diffusion in Nickel
journal, November 1965
- Wazzan, Ahmed Rassem
- Journal of Applied Physics, Vol. 36, Issue 11
A unified approach to grain boundary sliding in creep and superplasticity
journal, July 1994
- Langdon, T. G.
- Acta Metallurgica et Materialia, Vol. 42, Issue 7
Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients
journal, April 2005
- Greer, Julia R.; Oliver, Warren C.; Nix, William D.
- Acta Materialia, Vol. 53, Issue 6
Nanoscale gold pillars strengthened through dislocation starvation
journal, June 2006
- Greer, Julia R.; Nix, William D.
- Physical Review B, Vol. 73, Issue 24
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
journal, August 2011
- Greer, Julia R.; De Hosson, Jeff Th. M.
- Progress in Materials Science, Vol. 56, Issue 6
Microstructure and small-scale size effects in plasticity of individual phases of Al0.7CoCrFeNi High Entropy alloy
journal, September 2016
- Giwa, Adenike M.; Liaw, Peter K.; Dahmen, Karin A.
- Extreme Mechanics Letters, Vol. 8
Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale
journal, April 2010
- Kim, Ju-Young; Jang, Dongchan; Greer, Julia R.
- Acta Materialia, Vol. 58, Issue 7
Correlation between Critical Temperature and Strength of Small-Scale bcc Pillars
journal, August 2009
- Schneider, A. S.; Kaufmann, D.; Clark, B. G.
- Physical Review Letters, Vol. 103, Issue 10
Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy
journal, February 2014
- Zou, Yu; Maiti, Soumyadipta; Steurer, Walter
- Acta Materialia, Vol. 65
Ultrastrong ductile and stable high-entropy alloys at small scales
journal, July 2015
- Zou, Yu; Ma, Huan; Spolenak, Ralph
- Nature Communications, Vol. 6, Issue 1
Dynamic fracture (spalling) of metals
journal, January 1983
- Meyers, Marc André; Taylor Aimone, Catherine
- Progress in Materials Science, Vol. 28, Issue 1
Shear localization in dynamic deformation of materials: microstructural evolution and self-organization
journal, October 2001
- Meyers, Marc A.; Nesterenko, Vitali F.; LaSalvia, Jerry C.
- Materials Science and Engineering: A, Vol. 317, Issue 1-2
Shear localization of fcc high-entropy alloys
journal, January 2018
- Meyers, Marc A.; Li, Zezhou; Zhao, Shiteng
- EPJ Web of Conferences, Vol. 183
Shock compression response of high entropy alloys
journal, May 2016
- Jiang, Z. J.; He, J. Y.; Wang, H. Y.
- Materials Research Letters, Vol. 4, Issue 4
Amorphization at twin-twin intersected region in FeCoCrNi high-entropy alloy subjected to high-pressure torsion
journal, May 2017
- Wu, Wenqian; Ni, Song; Liu, Yong
- Materials Characterization, Vol. 127
Amorphization and nanocrystallization of silicon under shock compression
journal, January 2016
- Zhao, S.; Hahn, E. N.; Kad, B.
- Acta Materialia, Vol. 103
Deformation and failure in extreme regimes by high-energy pulsed lasers: A review
journal, March 2017
- Remington, Tane P.; Remington, Bruce A.; Hahn, Eric N.
- Materials Science and Engineering: A, Vol. 688
Generating gradient germanium nanostructures by shock-induced amorphization and crystallization
journal, August 2017
- Zhao, Shiteng; Kad, Bimal; Wehrenberg, Christopher E.
- Proceedings of the National Academy of Sciences, Vol. 114, Issue 37
Pressure and shear-induced amorphization of silicon
journal, December 2015
- Zhao, S.; Kad, B.; Hahn, E. N.
- Extreme Mechanics Letters, Vol. 5
Directional amorphization of boron carbide subjected to laser shock compression
journal, October 2016
- Zhao, Shiteng; Kad, Bimal; Remington, Bruce A.
- Proceedings of the National Academy of Sciences, Vol. 113, Issue 43
The role of dislocations in the growth of nanosized voids in ductile failure of metals
journal, February 2009
- Meyers, Marc A.; Traiviratana, Sirirat; Lubarda, V. A.
- JOM, Vol. 61, Issue 2
Adiabatic shear localization in the CrMnFeCoNi high-entropy alloy
journal, June 2018
- Li, Zezhou; Zhao, Shiteng; Alotaibi, Senhat M.
- Acta Materialia, Vol. 151
Hall-petch strengthening for the microhardness of twelve nanometer grain diameter electrodeposited nickel
journal, January 1986
- Hughes, G. D.; Smith, S. D.; Pande, C. S.
- Scripta Metallurgica, Vol. 20, Issue 1
Grain-size dependent mechanical behavior of nanocrystalline metals
journal, October 2015
- Hahn, Eric N.; Meyers, Marc A.
- Materials Science and Engineering: A, Vol. 646
Growth Twins and Deformation Twins in Metals
journal, July 2014
- Beyerlein, Irene J.; Zhang, Xinghang; Misra, Amit
- Annual Review of Materials Research, Vol. 44, Issue 1
The formation of annealing twins
journal, December 1969
- Gleiter, H.
- Acta Metallurgica, Vol. 17, Issue 12
A Model for Boundary Diffusion Controlled Creep in Polycrystalline Materials
journal, June 1963
- Coble, R. L.
- Journal of Applied Physics, Vol. 34, Issue 6
High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
journal, May 2017
- Tracy, Cameron L.; Park, Sulgiye; Rittman, Dylan R.
- Nature Communications, Vol. 8, Issue 1
Mechanisms of tempered martensite embrittlement in low alloy steels
journal, August 1978
- Horn, R. M.; Ritchie, Robert O.
- Metallurgical Transactions A, Vol. 9, Issue 8