Additive manufacturing of metallic components – Process, structure and properties

DebRoy, T.; Wei, H. L.; Zuback, J. S.; Mukherjee, T.; Elmer, J. W.; Milewski, J. O.; Beese, A. M.; Wilson-Heid, A.; De, A.; Zhang, W.

doi:10.1016/j.pmatsci.2017.10.001

Title: Additive manufacturing of metallic components – Process, structure and properties

Full Record
Other Related Research

Authors:: DebRoy, T.; Wei, H. L.; Zuback, J. S.; Mukherjee, T.; Elmer, J. W.; Milewski, J. O.; Beese, A. M.; Wilson-Heid, A.; De, A.; Zhang, W.

Publication Date:: 2018-03-01

Sponsoring Org.:: USDOE

OSTI Identifier:: 1550025

Grant/Contract Number:: NE0008280; AC52-07NA27344

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Progress in Materials Science

Additional Journal Information:: Journal Name: Progress in Materials Science Journal Volume: 92 Journal Issue: C; Journal ID: ISSN 0079-6425

Publisher:: Elsevier

Country of Publication:: United Kingdom

Language:: English

Citation Formats


                    DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., and Zhang, W. Additive manufacturing of metallic components – Process, structure and properties.  United Kingdom: N. p., 2018. 
Web.  doi:10.1016/j.pmatsci.2017.10.001.

Copy to clipboard


                    DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. Additive manufacturing of metallic components – Process, structure and properties.  United Kingdom.  https://doi.org/10.1016/j.pmatsci.2017.10.001

Copy to clipboard


                    DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., and Zhang, W. Thu .  
"Additive manufacturing of metallic components – Process, structure and properties".  United Kingdom.  https://doi.org/10.1016/j.pmatsci.2017.10.001.

Copy to clipboard


                    
@article{osti_1550025,

  title        = {Additive manufacturing of metallic components – Process, structure and properties},

  author       = {DebRoy, T. and Wei, H. L. and Zuback, J. S. and Mukherjee, T. and Elmer, J. W. and Milewski, J. O. and Beese, A. M. and Wilson-Heid, A. and De, A. and Zhang, W.},

  abstractNote = {},

  doi          = {10.1016/j.pmatsci.2017.10.001},

  journal      = {Progress in Materials Science},

  number       = C,

  volume       = 92,

  place        = {United Kingdom},

  year         = {2018},

  month        = {3}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.pmatsci.2017.10.001

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 3005 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Process-Structure-Property Relationships for 316L Stainless Steel Fabricated by Additive Manufacturing and Its Implication for Component Engineering

Journal Article Yang, Nancy ; Yee, J. ; Zheng, B. ; ... - Journal of Thermal Spray Technology

We investigate the process-structure-property relationships for 316L stainless steel prototyping utilizing 3-D laser engineered net shaping (LENS), a commercial direct energy deposition additive manufacturing process. Our study concluded that the resultant physical metallurgy of 3-D LENS 316L prototypes is dictated by the interactive metallurgical reactions, during instantaneous powder feeding/melting, molten metal flow and liquid metal solidification. This study also showed 3-D LENS manufacturing is capable of building high strength and ductile 316L prototypes due to its fine cellular spacing from fast solidification cooling, and the well-fused epitaxial interfaces at metal flow trails and interpass boundaries. However, without further LENS processmore »« less
Cited by 38
https://doi.org/10.1007/s11666-016-0480-y

Full Text Available
The Effect of Atmosphere on the Composition of Wire Arc Additive Manufactured Metal Components

Journal Article Elmer, John W. ; Gibbs, Gordon - Science and Technology of Welding and Joining

In this study, the effects of atmospheric contamination on wire arc additively manufactured (WAAM) components were studied by producing AM multilayer parts under controlled conditions. Gas impurity levels were maintained using an argon purge box at levels from atmospheric (210,000 ppm O₂) to 1 ppm O₂, and with corresponding levels of nitrogen. Stainless steel (308L), titanium (Ti–6Al–4V) and pure Ta were studied, each having different affinities for oxygen and nitrogen. Results show that WAAM parts made in air produce unacceptable oxygen and/or nitrogen levels for most applications. However, with moderate purging, all three metals can be deposited by WAAM withmore »« less
Cited by 21
https://doi.org/10.1080/13621718.2019.1605473

Full Text Available
Model-Based Ultrasonic Signal Processing for the Nondestructive Evaluation of Additive Manufacturing Components

Technical Report Candy, J. V. ; Fisher, K. A. ; Fix, B.

Ultrasonic testing (UT) for nondestructive evaluation (NDE) is a critical entity necessary to resolve both the quality and precision questions of complex parts evolving from the innovative additive manufacturing (AM) process. This modality provides the essential quantitative information for acceptance and potential flaw detectionof the part under investigation. A primary ingredient in UT besides the required precision robotic hardware for theacquisition of high quality measurement data is the underlying signal processing. It is here that much of the system performance capability resides. In this report,we discuss the basic steps in UT signal processing along with current and future capabilities thatmore »« less
https://doi.org/10.2172/1762858

Full Text Available
A combination interferometric and morphological image processing approach to rapid quality assessment of additively manufactured cellular truss core components

Journal Article Keene, Lionel ; Rogers, Brian ; Stobbe, David ; ... - International Journal of Advanced Manufacturing Technology

Advanced manufacturing (AM) processes such as laser powder bed fusion (LPBF) are increasingly capable of fabricating components with useful and unprecedented mechanical properties by incorporating complex internal bracing structures. From the standpoint of quality control and assessment, however, internally complex assemblies present significant build-verification challenges. Here we propose a hybrid approach to the inspection involving the application of computer-aided speckle interferometry (CASI) and morphological image processing as a rapid, inexpensive, and facile method for AM quality control. The described methodology has low capital equipment costs, is full-field and non-contact, can be used in an industrial setting, and has very lowmore »« less
https://doi.org/10.1007/s00170-023-11054-4
Modeling the Effects of Texture on Process-Structure-Property Evolution in Additively Manufactured Metals.

Conference Brown, Judith Alice ; Bishop, Joseph E. ; Rodgers, Theron

Abstract not provided.
Full Text Available

Similar Records