Characterization of Lean NOx Trap Catalysts with In-Cylinder Regeneration Strategies
- ORNL
Lean NOx trap (LNT) catalysts with different formulations have been characterized on a light-duty diesel engine platform. Two in-cylinder regeneration strategies were used during the study. The reductant chemistry differed for both strategies with one strategy having high levels of CO and H2 and the other strategy having a higher hydrocarbon component. The matrix of LNT catalysts that were characterized included LNTs with various sorbate loads and varying ceria content; the sorbate was Ba. Intra-catalyst measurements of exhaust gas composition were obtained at one quarter, one half, and three quarters of the length of the catalysts to better understand the affect of formulation on performance. Exhaust analysis with FTIR allowed measurement of NH3 and thereby, a measurement of N2 selectivity for the catalysts. Although overall NOx conversion increased with increasing sorbate load, the formation of NH3 increased as well. Interestingly, the presence of ceria in the LNT allowed NH3 to be oxidized to N2 in the downstream half of the LNT, thereby greatly reducing the tailpipe NH3 level. Despite different capacities for NOx sorption, a similar pattern for NOx adsorption as a function of the length of the catalyst was observed for catalysts with 8% and 20% Ba load. Results from these engine based experiments will be discussed relative to the body of literature concerning fundamental and model LNT studies.
- Research Organization:
- Oak Ridge National Laboratory (ORNL); Fuels, Engines and Emissions Research Center
- Sponsoring Organization:
- EE USDOE - Office of Energy Efficiency and Renewable Energy (EE)
- DOE Contract Number:
- AC05-00OR22725
- OSTI ID:
- 931069
- Country of Publication:
- United States
- Language:
- English
Similar Records
Lean Gasoline Engine Reductant Chemistry During Lean NOx Trap Regeneration
Product Selectivity During Regeneration of Lean NOx Trap Catalysts