Industrial test coking of partially compacted charges by the method of briquetting without a binder

Journal Article · Thu Jan 01 04:00:00 EST 1981 · Coke Chem. USSR (Engl. Transl.); (United States)

OSTI ID:6227879

Olfert, A I; Taits, E M; Semenov, B M; Ruban, N V; Pavlov, V V; Ivanov, A I; Kovaleva, N A; Kalika, V G

As a result of industrial test investigations on the coking of partially compacted charges by the method of briquetting without a binder it was shown that: (1) It is possible in practice to briquette coal charges without a binder to obtain small briquettes weighing about 7-8 g, with density of 1.14 to 1.15 g/cm/sup 3/, sufficiently strong that these briquettes may be used as a component of a coal charge loaded into coke ovens. (2) There ia an increase in the mechanical strength of the coke by the M40 index by 3% and a decrease in the M10 by 1.2% in the box coking of partially compacted industrial coal charge of the Moscow Coke Gas Plant. (3) There is an increase in the yield of the over 40 mm size class coke (by 5 to 10%) with a corresponding decrease in the yield of the finer size classes) depending on the caking capacity in the box coking of partially compacted charges. (4) It is possible to increase (with partial compaction of the charges) the proportion of Kuznetsk poorly-caking coal in the industrial charge of the Moscow Coke Gas Plant to 50 to 60% in comparison to the present 20%.

• OSTI ID: 6227879
• Journal Information: Coke Chem. USSR (Engl. Transl.); (United States), Journal Name: Coke Chem. USSR (Engl. Transl.); (United States) Vol. 10; ISSN COKCA
• Country of Publication: United States
• Language: English

Related Subjects

01 COAL, LIGNITE, AND PEAT
010401* -- Coal & Coal Products-- Carbonization-- (-1987)
013000 -- Coal
Lignite
& Peat-- Transport
Handling
& Storage
BRIQUETTING
CAKING POWER
CARBONACEOUS MATERIALS
CARBONIZATION
CHEMICAL REACTIONS
COAL
COAL PREPARATION
COKE
COKING
COMMINUTION
COMPACTING
DATA
DECOMPOSITION
ENERGY SOURCES
EXPERIMENTAL DATA
FABRICATION
FOSSIL FUELS
FUELS
INFORMATION
MATERIALS
MECHANICAL PROPERTIES
MOLDING
NUMERICAL DATA