Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Epitaxial growth of YBCO/MgO/YBCO structures

Conference · · IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States)
OSTI ID:5877632
; ; ; ; ;  [1]
  1. Sumitomo Electric Industries Ltd., Itami, Hyogo (Japan). Itami Research Div.
This paper investigates a Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7{minus}y} (YBCO)/MgO/Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7{minus}y} structure on a MgO (100) substrate was made and its crystallographic structure by cross-sectional transmission electron microscopy (TEM). A MgO ultrathin film with (100) orientation as an intermediate layer was obtained on each of the (001) and (100) YBCO thin films at the substrate temperature of about 400{degrees}C. The crystallinity of the MgO layer as a function of the MgO thickness was investigated. The randomness of the crystallinity decreased with a decrease in the thickness. A (100) epitaxial MgO layer without other orientation was obtained at a thickness of 10nm. From the results of cross-sectional TEM observation of the YBCO/MgO/YBCO structure, it was found that the thickness of the MgO can be reduced to 5 nm, sharp interfaces were observed without any disrupted portion. When the thickness was reduced to 2 nm, the interface top layer and the base layer were crushed.
OSTI ID:
5877632
Report Number(s):
CONF-900944--
Conference Information:
Journal Name: IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States) Journal Volume: 27:2
Country of Publication:
United States
Language:
English