Development document for effluent limitations guidelines and standards for metal molding and casting (foundries). Point source category. Final report
Technical Report
·
OSTI ID:5844803
The Development Document describes the technical basis for final regulations (see the Federal Register for October 30, 1985, at 50FR v 45212) that establish effluent limitations guidelines and standards that limit the discharge of pollutants into navigable waters and publicly owned treatment works (POTWs) by existing and new sources engaged in metal molding and casting operations. The Development Document sets forth the effluent limitations guidelines achievable by the best practicable control technology currently available (BPT), the best available technology economically achievable (BAT), new source performance standards (NSPS) attainable by the best available demonstrated technology, and pretreatment standards applicable to existing and new discharges to POTWs (PSES and PSNS, respectively).
- Research Organization:
- Environmental Protection Agency, Washington, DC (USA). Industrial Technology Div.
- OSTI ID:
- 5844803
- Report Number(s):
- PB-86-161452/XAB; EPA/440/1-85/070
- Country of Publication:
- United States
- Language:
- English
Similar Records
Development document for effluent limitations guidelines and standards for the copper forming point source category (proposed)
Development document for proposed effluent limitations guidelines, new source performance standards, and pretreatment standards for the paint formulating point source category
Development document for effluent-limitations guidelines and standards for the nonferrous-metals-manufacturing point source category. Volume 1. General. Final report
Technical Report
·
Fri Oct 01 00:00:00 EDT 1982
·
OSTI ID:6260433
Development document for proposed effluent limitations guidelines, new source performance standards, and pretreatment standards for the paint formulating point source category
Technical Report
·
Fri Nov 30 23:00:00 EST 1979
·
OSTI ID:6260455
Development document for effluent-limitations guidelines and standards for the nonferrous-metals-manufacturing point source category. Volume 1. General. Final report
Technical Report
·
Mon May 01 00:00:00 EDT 1989
·
OSTI ID:6922149