Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Multistory transmission tower model for lightning surge analysis

Journal Article · · IEEE Transactions on Power Delivery (Institute of Electrical and Electronics Engineers); (United States)
DOI:https://doi.org/10.1109/61.85882· OSTI ID:5841324
; ;  [1]; ;  [2];  [3];  [4]
  1. Tokyo Univ. (Japan)
  2. Tokyo Electric Power Co., Inc. (Japan)
  3. Nissin Electric Co., Ltd., Kyoto (JP)
  4. Kansai Electric Power Co., Inc., Osaka (Japan)

Transmission towers have been modeled for lightning surge analysis based on the measurements on the towers alone. For an actual high voltage transmission tower, however, ground wires are equipped in many cases. This paper proposes a multistory transmission tower model to be used in the multi-conductor analysis by EMTP. The circuit parameters of the model are determined based on the measurement of voltages across the insulator strings on an actual 500 kV transmission tower. The flashover phase and current in response to a lightning stroke to a UHV transmission tower are also analyzed by using both conventional and new tower models for comparison.

OSTI ID:
5841324
Journal Information:
IEEE Transactions on Power Delivery (Institute of Electrical and Electronics Engineers); (United States), Journal Name: IEEE Transactions on Power Delivery (Institute of Electrical and Electronics Engineers); (United States) Vol. 6:3; ISSN 0885-8977; ISSN ITPDE
Country of Publication:
United States
Language:
English