Fabrication and properties of high-strength uranium-3/4 weight percent titanium alloy large-diameter straight bar stock
Technical Report
·
OSTI ID:5684849
- ed.
High-strength U-3/4 wt % Ti alloy in the form of 3.3-cm-diameter round and straight bar was produced. The starting constituents were derby uranium and titanium sponge. The constituents were vacuum-induction melted at 1350/sup 0/C and gang cast into preheated molds forming hot-topped ingots 13.3 cm in diameter. After homogenization, the ingots were converted to extrusion billets by cropping the hot-top and sawing the remainder in half. The billets were scalped to a diameter of 12.7 cm. They were then heated in a salt bath at 625/sup 0/C and forward extruded to a diameter of 4.1 cm. The reduction ratio was 10, and the extrusion constant averaged 25 tons per square inch. 11 refs., 10 figs., 8 tabs.
- Research Organization:
- Rockwell International Corp., Golden, CO (USA). Rocky Flats Plant
- DOE Contract Number:
- AC04-76DP03533
- OSTI ID:
- 5684849
- Report Number(s):
- RFP-4051; ON: DE88004495
- Country of Publication:
- United States
- Language:
- English
Similar Records
Hydrostatic extrusion of in situ process superconductive wire for use in NMR magnets
ZIRCONIUM--SUMMARY REPORT ON DEVELOPMENT OF 3$sub 4$ DIAMETER HOUSING TUBE WITH INTERNAL STRAIGHT RIBS
COLUMBIUM $sub 4$H$sub 4$ SECTION PROGRAM. PHASE I. EXTRUSION. PHASE II. DRAWING. Interim Report I, July 1, 1963-October 1, 1963
Conference
·
Thu Dec 31 23:00:00 EST 1981
· Adv. Cryog. Eng.; (United States)
·
OSTI ID:6019225
ZIRCONIUM--SUMMARY REPORT ON DEVELOPMENT OF 3$sub 4$ DIAMETER HOUSING TUBE WITH INTERNAL STRAIGHT RIBS
Technical Report
·
Fri Oct 30 23:00:00 EST 1964
·
OSTI ID:4083249
COLUMBIUM $sub 4$H$sub 4$ SECTION PROGRAM. PHASE I. EXTRUSION. PHASE II. DRAWING. Interim Report I, July 1, 1963-October 1, 1963
Technical Report
·
Fri Oct 30 23:00:00 EST 1964
·
OSTI ID:4110227
Related Subjects
36 MATERIALS SCIENCE
360101* -- Metals & Alloys-- Preparation & Fabrication
360103 -- Metals & Alloys-- Mechanical Properties
ACTINIDE ALLOYS
ALLOYS
CASTING
CHARPY TEST
CHEMICAL COMPOSITION
DESTRUCTIVE TESTING
DIAGRAMS
EXTRUSION
FABRICATION
HEAT TREATMENTS
IMPACT TESTS
MATERIALS TESTING
MATERIALS WORKING
MECHANICAL PROPERTIES
MECHANICAL TESTS
PHASE DIAGRAMS
SEGREGATION
TENSILE PROPERTIES
TESTING
TITANIUM ALLOYS
URANIUM ALLOYS
URANIUM BASE ALLOYS
360101* -- Metals & Alloys-- Preparation & Fabrication
360103 -- Metals & Alloys-- Mechanical Properties
ACTINIDE ALLOYS
ALLOYS
CASTING
CHARPY TEST
CHEMICAL COMPOSITION
DESTRUCTIVE TESTING
DIAGRAMS
EXTRUSION
FABRICATION
HEAT TREATMENTS
IMPACT TESTS
MATERIALS TESTING
MATERIALS WORKING
MECHANICAL PROPERTIES
MECHANICAL TESTS
PHASE DIAGRAMS
SEGREGATION
TENSILE PROPERTIES
TESTING
TITANIUM ALLOYS
URANIUM ALLOYS
URANIUM BASE ALLOYS