Saw-tooth instability studies in the Stanford Linear Collider damping rings
Conference
·
OSTI ID:508120
Experimental results of the instability studies are being reported. The system built gives a BPM-derived single bunch `instability signal`. The signal was recorded simultaneously with the longitudinal density bunch profiles obtained from the synchrotron light with the high resolution Hamamatsu streak camera. Correlation of the instability signal with the streak camera profiles has been found. For the strongly developed instability state the dominant mode structure was obtained.
- Research Organization:
- Stanford Linear Accelerator Center, Menlo Park, CA (United States)
- Sponsoring Organization:
- USDOE Office of Energy Research, Washington, DC (United States)
- DOE Contract Number:
- AC03-76SF00515
- OSTI ID:
- 508120
- Report Number(s):
- SLAC-PUB--7533; CONF-970503--146; ON: DE97007086
- Country of Publication:
- United States
- Language:
- English
Similar Records
Saw-tooth instability studies at the Stanford Linear Collider damping rings
Bunch length measurements in the SLC damping ring
Saw-Tooth Instability Studies at the Stanford Linear Collider Damping Rings
Technical Report
·
Mon Dec 13 23:00:00 EST 1999
·
OSTI ID:753246
Bunch length measurements in the SLC damping ring
Conference
·
Sat May 01 00:00:00 EDT 1993
·
OSTI ID:10187982
Saw-Tooth Instability Studies at the Stanford Linear Collider Damping Rings
Technical Report
·
Tue Nov 30 23:00:00 EST 1999
·
OSTI ID:1454216