INFLUENCE OF ADDITIONAL ALLOYING AGENTS ON PROPERTIES OF Mg-Th-Mn SYSTEM

Journal Article · Mon Jan 01 04:00:00 EST 1962 · Issled. Splavov Tsvetn. Metal. Akad. Nauk SSSR, Inst. Met.

OSTI ID:4678846

Drits, M E; Maltsev, M V; Sviderskaya, Z A; Padexhnova, E M; Trokhova, V F

The Mg-Th-Mn alloy with 2 to 3% Th and 0.6to 1% Mn was alloyed by additions of Zr, Ca, La. Ni, Ce, and Nd, reduced by hydraulic press by 90% at 420 deg C, quenched from 550 deg C, and artificially aged at 200 deg C for 16 hr. The effects of the alloying elements and work hardening occurring during heat treatment on yield strength, tensile strength, relative elongation, and microstructure were measured at 300 deg C. The influence of Ce concentration on phase formation was also studied. (Rev. Metal Lit., 20: No. 1, Jan.

• Research Organization: Originating Research Org. not identified
• NSA Number: NSA-17-032595
• OSTI ID: 4678846
• Journal Information: Issled. Splavov Tsvetn. Metal. Akad. Nauk SSSR, Inst. Met., Journal Name: Issled. Splavov Tsvetn. Metal. Akad. Nauk SSSR, Inst. Met. Vol. Vol: No. 3
• Country of Publication: Country unknown/Code not available
• Language: Russian

Related Subjects

AGING
CALCIUM ALLOYS
CERIUM ALLOYS
CONFIGURATION
HEAT TREATMENTS
LANTHANUM ALLOYS
MAGNESIUM ALLOYS
MANGANESE ALLOYS
MECHANICAL PROPERTIES
METALLOGRAPHY
METALS, CERAMICS, AND OTHER MATERIALS
NEODYMIUM ALLOYS
NICKEL ALLOYS
QUENCHING
TENSILE PROPERTIES
THORIUM ALLOYS
ZIRCONIUM ALLOYS