SLIP CASTING OF METAL POWDERS. PART III. Final Report
Technical Report
·
OSTI ID:4267755
Reviews of work described in six previous reports and the experimental work not reported heretofore are presented. lt was found that other types of metal powders, such as irregularly-shaped 316 stainless steel powder or nickel powder, can be applied to the slip casting process; however, the experimental results under this contract are not conclusive. The selection of processing variables for slip casting must be changed for each type of metal powder and probably for each variation in particle size. A comparison between the sintering behavior of slip-cast and pressure-compacted 316 stainless steel powder is presented. The tesi results indicate that slip cast material sinters ai a faster rate than does pressure-compacted powder. The phvsical properties or sintered materials made by both forming methods are given. (auth)
- Research Organization:
- Hausner (Henry H.), New York
- NSA Number:
- NSA-13-011183
- OSTI ID:
- 4267755
- Report Number(s):
- NYO-8666
- Country of Publication:
- United States
- Language:
- English
Similar Records
THE FORMING OF COMPLICATED SHAPES BY POWDER METALLURGY SLIP CASTING
PRELIMINARY REPORT ON THE METAL POWDER SLIP CASTING PROCESS. PART II
PRELIMINARY REPORT ON THE METAL POWDER SLIP CASTING PROCESS. PART I
Technical Report
·
Fri Aug 15 00:00:00 EDT 1958
·
OSTI ID:4323660
PRELIMINARY REPORT ON THE METAL POWDER SLIP CASTING PROCESS. PART II
Technical Report
·
Thu May 01 00:00:00 EDT 1958
·
OSTI ID:4303496
PRELIMINARY REPORT ON THE METAL POWDER SLIP CASTING PROCESS. PART I
Technical Report
·
Sun Sep 01 00:00:00 EDT 1957
·
OSTI ID:4330808