Anode plasma and focusing reb diodes
The use of electrical, optical, x-ray, and particle diagnostics to characterize the production of anode plasma and to monitor its influence on beam generation and focusing is reviewed. Studies using the Nereus accelerator show that after cathode turn-on, deposition of several kJ/gm on the anode is necessary before ions from hydrocarbons, adsorbed gases, and heavier metallic species are detected. The actual time at which ions are liberated depends on several factors, one of which is the specific heat of the anode substrate. Once formed, anode ions cross the A-K gap (with an energy equal to the diode voltage) and interact with the cathode to produce an axially peaked beam profile, a ''pinch'' which does not follow the critical current criterion. Experiments with externally generated anode plasma show that this type of pinch can be attracted to localized areas on the anode. Preliminary observations on Hydra indicate the anode plasma composition is similar to that on Nereus. The effect of this plasma on pinch dynamics currently is under investigation. (auth)
- Research Organization:
- Sandia Labs., Albuquerque, N.Mex. (USA)
- NSA Number:
- NSA-33-005304
- OSTI ID:
- 4182608
- Report Number(s):
- SAND--75-5765; CONF-751108--9
- Country of Publication:
- United States
- Language:
- English
Similar Records
Time-dependent impedance behavior of low-impedance REB diodes during self-pinching
Impedance characteristics of heated REB diodes