Temporal evolution of anode and cathode plasmas in a vircator diode
- Himeji Inst. of Tech., Himeji, Hyogo (Japan). Dept. of Electrical Engineering
- Kobe City Coll. of Technology (Japan)
- Texas Tech Univ., Lubbock, TX (United States)
The electron beam current in the diode region of a vircator at Himeji Institute of Technology is well characterized by the electron space-charge-limited current in bipolar flow. The beam current is well below the critical current defined for diode pinching and the observed microwave emission is accompanied by the strongly pinched electron beam. These results suggest the presence of anode and cathode plasma expanding in the anode-cathode (A-K) gap. In this paper the authors report the experimental observation of the evolution of anode and cathode plasmas in time and space. The experiments were performed with the pulsed power generator HARIMA-II. An anode plasma appears on the anode surface immediately after the rise of a beam current and at about 10 nsec later a cathode plasma on the cathode surface is formed. Both plasmas expand with approximately the same speed of 2 {times} 10{sup 4} m/sec. The A-K gap is closed by plasmas after about 100 nsec from the onset of anode plasma. The microwave emission occurs just before the gap closure. The anode plasma in the initial phase was identified as a hydrogen plasma with an aid of the optical filter for H{sub {alpha}} and H{sub {beta}} lines.
- OSTI ID:
- 170198
- Report Number(s):
- CONF-950612--; ISBN 0-7803-2669-5
- Country of Publication:
- United States
- Language:
- English
Similar Records
A MAGIC simulation study of the effects of bipolar flow on microwave emission in a vircator
Focused cathode design to reduce anode heating during vircator operation