Cathodic arc modulator systems for metallic plasma ion implantation
This paper describes the electrical design and operation of a cathodic arc modulator system for metallic plasma ion implantation. Depending on the ion implantation process recipe, various repetition rates, pulse widths, and currents are required. In addition, the cathodic arc system may be synchronized with a higher voltage target modulator system. The cathodic arc is water cooled and usually uses a self generated axial B-field, by use of a series connected solenoid around the arc anode. Typical arc currents of 800 amperes may be utilized with pulse widths ranging from 20 uS to 4 mS. Typical PRF`s may exceed 400 Hz, with overall system power limited by the presently available 10 kW transformer-rectifier. The cathodic arc modulator system consists of a command charged 10 kV trigger generator, a high voltage arc starter, and a low voltage, high current arc sustain circuit. The arc start and sustain circuits are independently adjustable and utilize a common IGBT device in a hot-deck configuration. This paper provides circuit design and performance information in addition to various process applications.
- Research Organization:
- Los Alamos National Lab., NM (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-7405-ENG-36
- OSTI ID:
- 392830
- Report Number(s):
- LA-UR--96-3354; CONF-960685--8; ON: DE97000381
- Country of Publication:
- United States
- Language:
- English
Similar Records
System design and operation of a 100 kilovolt, 2 kilohertz pulse modulator for plasma source ion implantation
Plasma source ion implantation of metal ions: Synchronization of cathodic-arc plasma production and target bias pulses