Evaluation of Au/GaAsP and Au/GaP Schottky photodiodes as radiometric detectors in the EUV
- Electron and Optical Physics Division, Physics Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899 (United States)
Many applications of synchrotron radiation require an absolute measurement of photon flux. Schottky photodiodes consisting of a thin Au film deposited on GaAsP or GaP are sensitive to radiation in the extreme ultraviolet (EUV) and may be considered for use as radiometric transfer standard detectors. A radiometric detector should exhibit high quantum efficiency, spatial uniformity, resistance to radiation-induced changes, and temporal stability. While Au/GaAsP and Au/GaP Schottky photodiodes display high sensitivity, good uniformity, and resistance to radiation damage, they suffer from temporal instability. Results presented in this paper indicate that the quantum efficiency of Au/GaAsP and Au/GaP photodiodes degrades in the region from 50 nm to 150 nm during normal storage and is unstable at wavelengths as long as 254 nm. This loss of sensitivity is not substantially affected by ambient humidity and may be affected by heating the device. While useful as detectors, Au/GaAsP and Au/GaP Schottky photodiodes are not suitable for use as transfer standards in this spectral region and may not be suitable for other applications in which detector efficiency must be stable over periods longer than a week. {copyright} {ital 1996 American Institute of Physics.}
- OSTI ID:
- 389569
- Report Number(s):
- CONF-9510119-; ISSN 0034-6748; TRN: 96:027978
- Journal Information:
- Review of Scientific Instruments, Vol. 67, Issue 9; Conference: SRI `95: synchrotron radiation instrumentation symposium and the 7. users meeting for the advanced photon source (APS), Argonne, IL (United States), 16-20 Oct 1995; Other Information: PBD: Sep 1996
- Country of Publication:
- United States
- Language:
- English
Similar Records
Self-calibration of semiconductor photodiodes in the soft x-ray region
CdZnTe photodiode arrays for medical imaging