Development of Technology for Detachment of Calandria Tube Rolled Joint of Pressurised Heavy Water Reactors
Journal Article
·
· Experimental Techniques
- Bhabha Atomic Research Centre, Reactor Engineering Division (India)
Coolant channel assembly of PHWRs consisting mainly of pressure tube and calandria tube undergoes sag due to irradiation enhanced creep during its life time. Typical service life of the pressure tube is limited to about 15 full power years due to such ageing related degradation. On account of the degradation the pressure tube needs replacement more than twice during the licensed period of reactor operation. As the sag in the calandria tube is also excessive, it has to be replaced to facilitate installation of new and straight pressure tube during retubing and to avoid interference of sagged calandria tube with horizontal reactivity devices. The calandria tube and the tube sheet are joined by sandwich type rolled joints. For detaching the joint an improved technique has been developed that helps to detach the joint without affecting the groove geometry and integrity of the tube sheet. The system works on the principle of fast thermal cycle of heating and cooling of the insert and calandria tube in the rolled joint region while applying axial load to the calandria tube. Though rolled joint detachment by induction heating technique has been in use in CANDU reactors for removal of pressure tubes and calandria tubes, the present design incorporates a liquid nitrogen for faster cooling and simultaneous application of load with a gripping module for detachment and removal of calandria tube and the insert from the tube sheet of end shield in shorter time. This paper describes the methodology of rolled joint detachment, challenges involved in the design, features of the detachment system, findings of experimental trials and observations.
- OSTI ID:
- 22771771
- Journal Information:
- Experimental Techniques, Journal Name: Experimental Techniques Journal Issue: 6 Vol. 41; ISSN 0732-8818; ISSN EXPTD2
- Country of Publication:
- United States
- Language:
- English
Similar Records
Expanded joints for calandria tubes and coolant channel assemblies in CANDU type of power reactor
DESIGN DEVELOPMENT TESTS OF SOME COMPONENTS FOR A CALANDRIA-TYPE REACTOR
Numerical Simulation of Residual Stresses in Pressure Tube Rolled Joints of Indian Pressurised Heavy Water Reactor
Technical Report
·
Sun Dec 31 23:00:00 EST 1972
·
OSTI ID:4383520
DESIGN DEVELOPMENT TESTS OF SOME COMPONENTS FOR A CALANDRIA-TYPE REACTOR
Technical Report
·
Mon Jul 27 00:00:00 EDT 1959
·
OSTI ID:4229856
Numerical Simulation of Residual Stresses in Pressure Tube Rolled Joints of Indian Pressurised Heavy Water Reactor
Conference
·
Mon Jul 01 00:00:00 EDT 2002
·
OSTI ID:21072737