V28 Test Report
- Sandia National Laboratories (SNL), Albuquerque, NM, and Livermore, CA (United States)
The V28 containment vessel was procured by the US Army Recovered Chemical Material Directorate (RCMD) as a replacement vessel for use on the P2 Explosive Destruction Systems. It is the fourth EDS vessel to be fabricated under Code Case 2564 of the ASME Boiler and Pressure Vessel Code, which provides rules for the design of impulsively loaded vessels. The explosive rating for the vessel, based on the Code Case, is nine (9) pounds TNT- equivalent for up to 637 detonations. This report documents the results of explosive tests that were done on the vessel at Sandia National Laboratories in Albuquerque New Mexico to qualify the vessel for explosive use. The primary qualification test consisted of six, 1.5 pounds charges of Composition C-4 (equivalent to 11.25 pounds TNT) distributed around the vessel in accordance with the User Design Specification. This test was repeated due to a lack of proper clamp settings. Two additional tests using less explosive were performed, one identical in configuration to a test performed in the V27 qualification series as a baseline for comparison, and one where the separation distance of the charges was increased to extend the V27 analysis of distributed load effects on the P2 vessel. All vessel acceptance criteria were met.
- Research Organization:
- Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Sandia National Laboratories (SNL-CA), Livermore, CA (United States)
- Sponsoring Organization:
- US Army Recovered Chemical Material Directorate
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 1600620
- Report Number(s):
- SAND--2020-1577; 683872
- Country of Publication:
- United States
- Language:
- English
Similar Records
EDS V26 Vessel Clamp Explosive Test Report
EDS V25 Containment Vessel Explosive Qualification Test Report