Hydrodeoxygenation of HMF over Pt/C in a continuous flow reactor
- Dept. of Chemical &, Biomolecular Engineering Catalysis Center for Energy Innovation, University of Pennsylvania Philadelphia PA 19104
- Dept. of Chemical &, Biomolecular Engineering Catalysis Center for Energy Innovation, University of Delaware Newark DE 19716
The three‐phase hydrodeoxygenation reaction of 5‐hydroxymethylfurfural (HMF) with H 2 was studied over a 10 wt % Pt/C catalyst using both batch and flow reactors, with ethanol, 1‐propanol, and toluene solvents. The reaction is shown to be sequential, with HMF reacting first to furfuryl ethers and other partially hydrogenated products. These intermediate products then form dimethyl furan (DMF), which in turn reacts further to undesired products. Furfuryl ethers were found to react to DMF much faster than HMF, explaining the higher reactivity of HMF when alcohol solvents were used. With the optimal residence time, it was possible to achieve yields approaching 70% in the flow reactor with the Pt/C catalyst. Much higher selectivities and yields were obtained in the flow reactor than in the batch reactor because side products are formed sequentially, rather than in parallel, demonstrating the importance of choosing the correct type of reactor in catalyst screening. © 2014 American Institute of Chemical Engineers AIChE J , 61: 590–597, 2015
- Sponsoring Organization:
- USDOE
- Grant/Contract Number:
- NONE; SC0001004
- OSTI ID:
- 1400877
- Alternate ID(s):
- OSTI ID: 1210570
OSTI ID: 1385129
- Journal Information:
- AIChE Journal, Journal Name: AIChE Journal Journal Issue: 2 Vol. 61; ISSN 0001-1541
- Publisher:
- Wiley Blackwell (John Wiley & Sons)Copyright Statement
- Country of Publication:
- United States
- Language:
- English
Similar Records
Selective hydrodeoxygenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) over carbon supported copper catalysts using isopropyl alcohol as a hydrogen donor
Catalytic hydrogenation of HMF to BHMF over copper catalysts