Next Generation Nuclear Plant Steam Generator and Intermediate Heat Exchanger Materials Research and Development Plan
DOE has selected the High Temperature Gas-cooled Reactor (HTGR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production. It will have an outlet gas temperature in the range of 900°C and a plant design service life of 60 years. The reactor design will be a graphite moderated, helium-cooled, prismatic or pebble-bed reactor and use low-enriched uranium, Tri-Isotopic (TRISO)-coated fuel. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The NGNP Materials Research and Development (R&D) Program is responsible for performing R&D on likely NGNP materials in support of the NGNP design, licensing, and construction activities. Today’s high-temperature alloys and associated ASME Codes for reactor applications are approved up to 760°C. However, some primary system components, such as the Intermediate Heat Exchanger (IHX) for the NGNP will require use of materials that can withstand higher temperatures. The thermal, environmental, and service life conditions of the NGNP will make selection and qualification of some high-temperature materials a significant challenge. Examples include materials for the core barrel and core internals, such as the control rod sleeves. The requirements of the materials for the IHX are among the most demanding. Selection of the technology and design configuration for the NGNP must consider both the cost and risk profiles to ensure that the demonstration plant establishes a sound foundation for future commercial deployments. The NGNP challenge is to achieve a significant advancement in nuclear technology while at the same time setting the stage for an economically viable deployment of the new technology in the commercial sector soon after 2020. A number of solid solution strengthened nickel based alloys have been considered for application in heat exchangers and core internals for the NGNP. The primary candidates are Inconel 617, Haynes 230, Incoloy 800H and Hastelloy XR. Based on the technical maturity, availability in required product forms, experience base, and high temperature mechanical properties all of the vendor pre-conceptual design studies have specified Alloy 617 as the material of choice for heat exchangers. Also a draft code case for Alloy 617 was developed previously. Although action was suspended before the code case was accepted by ASME, this draft code case provides a significant head start for achieving codification of the material. Similarly, Alloy 800H is the material of choice for control rod sleeves. In addition to the above listed considerations, Alloy 800H is already listed in the nuclear section of the ASME Code; although the maximum use temperature and time need to be increased.
- Research Organization:
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
- Sponsoring Organization:
- DOE - NE
- DOE Contract Number:
- DE-AC07-05ID14517
- OSTI ID:
- 993192
- Report Number(s):
- INL/EXT-08-14107; TRN: US1008063
- Country of Publication:
- United States
- Language:
- English
Similar Records
Next Generation Nuclear Plant Intermediate Heat Exchanger Acquisition Strategy
Generation IV Reactors Integrated Materials Technology Program Plan: Focus on Very High Temperature Reactor Materials
Related Subjects
AFTER-HEAT REMOVAL
COMMERCIAL SECTOR
CONTROL ELEMENTS
DEMONSTRATION PLANTS
DESIGN
DRILLING EQUIPMENT
GAS COOLED REACTORS
HASTELLOY XR
HEAT EXCHANGERS
HYDROGEN PRODUCTION
INCOLOY 800H
INCONEL 617
MECHANICAL PROPERTIES
NUCLEAR POWER
PEBBLE BED REACTORS
RADIOACTIVE MATERIALS
SERVICE LIFE
SOLID SOLUTIONS
STEAM GENERATORS
High Temperature Gas-cooled Reactor
Next Generation Nuclear Plant
Tri-Isotopic (TRISO)-coated fuel