RIP Input Tables From WAPDEG for LA Design Selection: Repository Horizon Elevation- 2- Leel AML 50% and Near Maximum
The purpose of this calculation is to document the WAPDEG version 3.09 (CRWMS M&O 1998b). Software Routine Report for WAPDEG (Version 3.09) simulations used to analyze waste package degradation and failure under the repository exposure conditions characterized by a two-tier thermal loading repository design. Also documented is the post-processing of these results into tables of waste-package-degradation-time histories suitable for use as input into the Integrated Probabilistic Simulator for Environmental Systems (RIP) version 5.19.01 (Golder Associates 1998) computer program. Specifically, the WAPDEG simulations discussed in this calculation correspond to waste package emplacement conditions (repository environment and design) as defined in the Total System Performance Assessment-Viability Assessment (CRWMS M&O 1998a). Total System Performance Assessment-Viability Assessment (TSPA-VA) Analyses Technical Basis Document--Chapter 5, Waste Package Degradation Modeling And Abstraction, pp. 5-27 to 5-29, with the exception that a two-tier thermal loading design feature as specified in the License Application Design Selection (LADS) study was analyzed. The particular design feature evaluated in this report is a modification of the repository horizon elevation and layout within the Topopah Springs Member of Yucca Mountain. Specifically, the modification consists of adding a second level, 50-m above the base case repository layout. Two options were considered, representing two variations in thermal loading. In Design Feature 25e (designated DF25e), each level has an Areal Mass Loading (AML) of 42.5 MTU/acre (i.e., half the VA base case). In Design Feature 25f (designated DF25), each level has an AML of 64MTU/acre. As a result of the change in waste package placement relative to the TSPA-VA base-case design, different temperature and relative humidity time histories at the waste package surface are calculated (input to the WAPDEG simulations), and consequently different waste package failure histories (as calculated by WAPDEG) result.
- Research Organization:
- Yucca Mountain Project, Las Vegas, NV (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- NA
- OSTI ID:
- 895332
- Report Number(s):
- B00000000-01717-0210-00061 Rev. 00; MOL.19990819.0269, DC# 22554; TRN: US0702526
- Country of Publication:
- United States
- Language:
- English
Similar Records
RIP Input Tables From WAPDEG for LA Design Selection: Continuous Post-Closure Ventilation Design- Open Loop
RIP Input Tables from WAPDEG for LA Design Selection: Enhanced Design Alternative II-3