Microminiature optical waveguide structure and method for fabrication
- Castro Valley, CA
- Pleasanton, CA
- Livermore, CA
A method for manufacturing low-cost, nearly circular cross section waveguides comprises starting with a substrate material that a molten waveguide material can not wet or coat. A thin layer is deposited of an opposite material that the molten waveguide material will wet and is patterned to describe the desired surface-contact path pedestals for a waveguide. A waveguide material, e.g., polymer or doped silica, is deposited. A resist material is deposited and unwanted excess is removed to form pattern masks. The waveguide material is etched away to form waveguide precursors and the masks are removed. Heat is applied to reflow the waveguide precursors into near-circular cross-section waveguides that sit atop the pedestals. The waveguide material naturally forms nearly circular cross sections due to the surface tension effects. After cooling, the waveguides will maintain the round shape. If the width and length are the same, then spherical ball lenses are formed. Alternatively, the pedestals can be patterned to taper along their lengths on the surface of the substrate. This will cause the waveguides to assume a conical taper after reflowing by heat.
- Research Organization:
- Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)
- DOE Contract Number:
- W-7405-ENG-48
- Assignee:
- Regents of University of California (Oakland, CA)
- Patent Number(s):
- US 5846694
- OSTI ID:
- 872024
- Country of Publication:
- United States
- Language:
- English
Controlled Collapse Reflow Chip Joining
|
journal | May 1969 |
Reflow and burial of channel waveguides formed in sol-gel glass on Si substrates
|
journal | September 1993 |
Microlens Fabrication Technique For An Efficient Laser/Single-Mode Fiber Coupling
|
conference | January 1987 |
Silica-based circular cross-sectioned channel waveguides
|
journal | March 1991 |
Similar Records
Design of single-mode step-tapered waveguide sections
Hyperbolic-cosine waveguide tapers and oversize rectangular waveguide for reduced broadband insertion loss in W-band electron paramagnetic resonance spectroscopy. II. Broadband characterization
Related Subjects
optical
waveguide
structure
method
fabrication
manufacturing
low-cost
nearly
circular
section
waveguides
comprises
starting
substrate
material
molten
wet
coat
layer
deposited
opposite
patterned
describe
desired
surface-contact
path
pedestals
polymer
doped
silica
resist
unwanted
excess
removed
form
pattern
masks
etched
precursors
heat
applied
reflow
near-circular
cross-section
sit
atop
naturally
forms
sections
due
surface
tension
effects
cooling
maintain
shape
width
length
spherical
ball
lenses
formed
alternatively
taper
lengths
assume
conical
reflowing
waveguide material
resist material
substrate material
optical waveguide
surface tension
waveguide structure
optical wave
desired surface
circular cross-section
spherical ball
conical taper
/430/385/