Mechanical Engineering of the Linac for the Spallation Neutron Source
The linac for the Spallation Neutron Source (SNS) Project will accelerate an average current of 1 mA of H{sup {minus}} ions from 20 MeV to 1GeV for injection into an accumulator ring. The linac will be an intense source of H{sup {minus}} ions and as such requires advanced design techniques to meet project technical goals as well as to minimize costs. The DTL, CCDTL and CCL are 466m long and operate at 805 MHz with a maximum H{sup {minus}} input current of 28 mA and 7% rf duty factor. The Drift Tube Linac is a copper-plated steel structure using permanent magnetic quadrupoles. The Coupled-Cavity portions are brazed copper structures and use electromagnetic quads. RF losses in the copper are 80 MW, with total rf power supplied by 52 klystrons. Additionally, the linac is to be upgraded to the 2- and 4-MW beam power levels with no increase in duty factor. The authors give an overview of the linac mechanical engineering effort and discuss the special challenges and status of the effort.
- Research Organization:
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- W-7405-ENG-36
- OSTI ID:
- 758886
- Report Number(s):
- LA-UR-99-1381; TRN: US0004427
- Resource Relation:
- Conference: 1999 Particle Accelerator Conference, New York, NY (US), 03/29/1999--04/02/1999; Other Information: PBD: 29 Mar 1999
- Country of Publication:
- United States
- Language:
- English
Similar Records
LOW LOSS DESIGN OF THE LINAC AND ACCUMULATOR RING FOR THE SPALLATION NEUTRON SOURCE.
Low-power RF tuning of the Spallation Neutron Source warm LINAC structures