Design of an actively cooled plate calorimeter for the investigation of pool fire heat fluxes

Conference · Wed Jan 01 00:00:00 EST 1992

OSTI ID:6956777

Koski, J. A.; Keltner, N. R.; Nicolette, V. F. ^[1]; Wix, S. D. ^[2]

---

1. Sandia National Labs., Albuquerque, NM (United States)
2. GRAM, Inc., Albuquerque, NM (United States)

For final qualification of shipping containers for transport of hazardous materials, thermal testing in accordance with regulations such as 10CFR71 must be completed. Such tests typically consist of 30 minute exposures with the container fully engulfed in flames from a large, open pool of JP4 jet engine fuel. Despite careful engineering analyses of the container, testing often reveals design problems that must be solved by modification and expensive retesting of the container. One source of this problem is the wide variation in surface heat flux to the container that occurs in pool fires. Average heat fluxes of 50 to 60 kW/m{sup 2} are typical and close the values implied by the radiation model in 10CFR71, but peak fluxes up to 150 kW/m{sup 2} are routinely observed in fires. Heat fluxes in pool fires have been shown to be a function of surface temperature of the container, height above the pool, surface orientation, wind, and other variables. If local variations in the surface heat flux to the container could be better predicted, design analyses would become more accurate, and fewer problems will be uncovered during testing. The objective of the calorimeter design described in this paper is to measure accurately pool fire heat fluxes under controlled conditions, and to provide data for calibration of improved analytical models of local flame-surface interactions.

• Research Organization: Sandia National Labs., Albuquerque, NM (United States)
• Sponsoring Organization: USDOE, Washington, DC (United States)
• DOE Contract Number: AC04-76DP00789
• OSTI ID: 6956777
• Report Number(s): SAND-91-2630C; CONF-920905-23; ON: DE92041157
• Resource Relation: Conference: 10. international symposium on the packaging and transportation of radioactive materials: PATRAM '92, Yokohama (Japan), 13-18 Sep 1992
• Country of Publication: United States
• Language: English

Related Subjects

42 ENGINEERING
47 OTHER INSTRUMENTATION
CALORIMETERS
DESIGN
CONTAINERS
THERMAL TESTING
HAZARDOUS MATERIALS
PACKAGING
CALORIMETRY
FIRES
HEAT FLUX
RADIANT HEAT TRANSFER
SAFETY ENGINEERING
TEMPERATURE MEASUREMENT
TRANSPORT
ENERGY TRANSFER
ENGINEERING
HEAT TRANSFER
MATERIALS
MATERIALS TESTING
MEASURING INSTRUMENTS
NONDESTRUCTIVE TESTING
TESTING
420204* - Engineering- Shipping Containers
440500 - Thermal Instrumentation- (1990-)