Application of the J integral to fracture under mixed-mode loading. [MMJINT; 4330V steel]
The calculation of the J integral proved to be a successful method for characterizing the stress and displacement fields around a crack tip under mixed mode loading. A computer program was written to determine the symmetric and antisymmetric J integral quantities. The stress intensity factors from these J integral calculations were in excellent agreement with other calculations. The compact shear specimen used contains three loading holes, the load applied at the center hole being the opposite direction to the load applied at the two outer holes. For 7075-T6 aluminum, K/sub IIc/ was 1.9 times larger than K/sub Ic/. In the brittle photoelastic material K/sub IIc/ was less than K/sub Ic/. Failure of the 4330V steel compact shear specimens came as a result of the average shear stress in the region ahead of the crack tip exceeding the material flow shear stress. The experimental results suggest that the angle of crack growth is best predicted by the maximum tangential stress theory.
- Research Organization:
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 5954232
- Report Number(s):
- UCRL-53182; ON: DE82002244
- Resource Relation:
- Other Information: Thesis
- Country of Publication:
- United States
- Language:
- English
Similar Records
Determination of dynamic fracture-initiation toughness using a novel impact bend test procedure
Fracture toughness of V-5Cr-5Ti alloy at room temperature and 100{degrees}C
Related Subjects
ALUMINIUM
FRACTURE PROPERTIES
COMPUTER CODES
M CODES
FRACTURE MECHANICS
STEELS
CRACK PROPAGATION
CRACKS
SHEAR
STRESS INTENSITY FACTORS
TENSILE PROPERTIES
ALLOYS
ELEMENTS
IRON ALLOYS
IRON BASE ALLOYS
MECHANICAL PROPERTIES
MECHANICS
METALS
360103* - Metals & Alloys- Mechanical Properties