Simulations of the LEDA RFQ 6.7-MeV accelerator
The codes PARMTEQM and RFQTRAK simulate the beam transport through the radio-frequency-quadrupole (RFQ) accelerator for the low-energy-demonstration accelerator (LEDA). They predict 95% transmission for a matched 110-mA proton beam with a normalized-rms emittance of 0.02 mm mrad. RFQTRAK simulates the effects of arbitrary vane-tip misalignments. This RFQ includes some new features in its design. It consists of four resonantly coupled 2-m-long segments that make up its 8-m length. It has higher vane-gap voltages at the high-energy end than the low-energy end. The entrance end of the RFQ has lower transverse focusing strength to facilitate beam matching. The exit of the RFQ has a transition cell and a radial-matching section. The exit radial-matching section matches the beam into the following accelerator.
- Research Organization:
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-7405-ENG-36
- OSTI ID:
- 537330
- Report Number(s):
- LA-UR-97-1634; CONF-970503-235; ON: DE97008312; TRN: 97:019533
- Resource Relation:
- Conference: 17. IEEE particle accelerator conference, Vancouver (Canada), 12-16 May 1997; Other Information: PBD: [1997]
- Country of Publication:
- United States
- Language:
- English
Similar Records
CHARACTERIZING PROTON BEAM OF 6.7 MeV LEDA RFQ BY FITTING HEBT WIRE-SCANNER PROFILES TO IMPROVED MODEL.
Characterizing proton beam of 6.7 MeV LEDA RFQ by fitting HEBT wire-scanner profiles to improved model.