Dendrite-separator interactions in lithium-based batteries
|
journal
|
February 2015 |
A Core-Shell Structured Polysulfonamide-Based Composite Nonwoven Towards High Power Lithium Ion Battery Separator
|
journal
|
January 2013 |
Preparation of poly(vinyl alcohol)-based separator with pore-forming additive for lithium-ion batteries
|
journal
|
August 2017 |
Performance and cost of materials for lithium-based rechargeable automotive batteries
|
journal
|
April 2018 |
Superior Thermally Stable and Nonflammable Porous Polybenzimidazole Membrane with High Wettability for High-Power Lithium-Ion Batteries
|
journal
|
February 2017 |
All-Integrated Bifunctional Separator for Li Dendrite Detection via Novel Solution Synthesis of a Thermostable Polyimide Separator
|
journal
|
August 2016 |
Room-Temperature Performance of Poly(Ethylene Ether Carbonate)-Based Solid Polymer Electrolytes for All-Solid-State Lithium Batteries
|
journal
|
December 2017 |
An Efficient Route to Polymeric Electrolyte Membranes with Interparticle Chain Microstructure Toward High-Temperature Lithium-Ion Batteries
|
journal
|
April 2017 |
Tailor-made pore controlled poly (arylene ether ketone) membranes as a lithium-ion battery separator
|
journal
|
February 2016 |
Poly(m-phenylene isophthalamide) separator for improving the heat resistance and power density of lithium-ion batteries
|
journal
|
October 2016 |
High‐Performance Al 2 O 3 /PAALi Composite Separator Prepared by Water‐Based Slurry for High‐Power Density Lithium‐Based Battery
|
journal
|
December 2020 |
Performance and Life Degradation Characteristics Analysis of NCM LIB for BESS
|
journal
|
December 2018 |
Understanding and applying coulombic efficiency in lithium metal batteries
|
journal
|
June 2020 |
A comparison of the thermal degradation behaviour of ethylene-ethyl acrylate copolymer, low density polyethylene and poly(ethyl acrylate)
|
journal
|
January 1995 |
Battery Separators
|
journal
|
October 2004 |
Phase-separation mechanism and corresponding final morphologies of thermoset blends based on unsaturated polyester and low-molar-weight saturated polyester
|
journal
|
January 2005 |
Improving Stability of Li-Ion Batteries by Means of Transition Metal Ions Trapping Separators
|
journal
|
January 2016 |
Wetting transitions on textured hydrophilic surfaces
|
journal
|
April 2008 |
Separators for Lithium-Ion Batteries: A Review on the Production Processes and Recent Developments
|
journal
|
April 2015 |
Directions in secondary lithium battery research and development
|
journal
|
June 1993 |
Facilitated Ion Diffusion in Multiscale Porous Particles: Application in Battery Separators
|
journal
|
February 2015 |
In situ study of photopolymerization by fourier transform infrared spectroscopy
|
journal
|
April 1991 |
Poly (ether ether ketone) (PEEK) porous membranes with super high thermal stability and high rate capability for lithium-ion batteries
|
journal
|
May 2017 |
On the Decomposition of Carbonate-Based Lithium-Ion Battery Electrolytes Studied Using Operando Infrared Spectroscopy
|
journal
|
January 2018 |
High-Modulus, High-Conductivity Nanostructured Polymer Electrolyte Membranes via Polymerization-Induced Phase Separation
|
journal
|
December 2013 |
Porous polyetherimide membranes with tunable morphology for lithium-ion battery
|
journal
|
November 2018 |
Novel lithium ion battery separator based on hydroxymethyl functionalized poly(ether ether ketone)
|
journal
|
October 2017 |
Storage Requirements and Costs of Shaping Renewable Energy Toward Grid Decarbonization
|
journal
|
September 2019 |
A review of recent developments in membrane separators for rechargeable lithium-ion batteries
|
journal
|
January 2014 |
Lithium metal anodes for rechargeable batteries
|
journal
|
January 2014 |
Thermotolerant separators for safe lithium-ion batteries under extreme conditions
|
journal
|
January 2020 |
Investigation of phase separation mechanisms of thermoset polymer blends by time-resolved SAXS
|
journal
|
June 2005 |
Before Li Ion Batteries
|
journal
|
November 2018 |
Characterization and performance evaluation of lithium-ion battery separators
|
journal
|
December 2018 |
Materials for lithium-ion battery safety
|
journal
|
June 2018 |
Horizons for Li-Ion Batteries Relevant to Electro-Mobility: High-Specific-Energy Cathodes and Chemically Active Separators
|
journal
|
July 2018 |
Sol–Gel with Phase Separation. Hierarchically Porous Materials Optimized for High-Performance Liquid Chromatography Separations
|
journal
|
September 2007 |
Enhanced cycle stability of LiCoPO 4 by using three-dimensionally ordered macroporous polyimide separator
|
journal
|
May 2017 |
Lithium-ion batteries with high charge rate capacity: Influence of the porous separator
|
journal
|
October 2007 |
High thermal resistance polyimide separators prepared via soluble precusor and non-solvent induced phase separation process for lithium ion batteries
|
journal
|
January 2016 |
Macroporous copolymer networks
|
journal
|
August 2000 |
Batteries and fuel cells for emerging electric vehicle markets
|
journal
|
April 2018 |
Infrared spectroscopic study of the interaction between lithium salt LiClO4 and the plasticizer ethylene carbonate in the polyacrylonitrile-based electrolyte
|
journal
|
May 1996 |
Evidence for short-range orientation effects in dipolar aprotic liquids from vibrational spectroscopy. Part 2.—Carbonyl compounds
|
journal
|
January 1974 |
Preparation of hydrophilic polyethylene/methylcellulose blend microporous membranes for separator of lithium-ion batteries
|
journal
|
January 2016 |
Bicontinuous Electrolytes via Thermally Initiated Polymerization for Structural Lithium Ion Batteries
|
journal
|
May 2019 |
Design Principles of Functional Polymer Separators for High-Energy, Metal-Based Batteries
|
journal
|
December 2017 |
Current status and challenges for automotive battery production technologies
|
journal
|
April 2018 |
A review of advanced separators for rechargeable batteries
|
journal
|
October 2021 |
Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy
|
journal
|
January 2016 |
Polyester Separators for Lithium-Ion Cells: Improving Thermal Stability and Abuse Tolerance
|
journal
|
December 2012 |
Evolution of Morphology, Modulus, and Conductivity in Polymer Electrolytes Prepared via Polymerization-Induced Phase Separation
|
journal
|
February 2015 |
Polymerization-Induced Phase Separation. 1. Conversion−Phase Diagrams
|
journal
|
January 1996 |
Creating ionic pathways in solid-state polymer electrolyte by using PVA-coated carbon nanofibers
|
journal
|
May 2021 |
Structural lithium ion battery electrolytes via reaction induced phase-separation
|
journal
|
January 2017 |
Recent advances on separator membranes for lithium-ion battery applications: From porous membranes to solid electrolytes
|
journal
|
November 2019 |
Well‐controlled 3D skeletal epoxy‐based monoliths obtained by polymerization induced phase separation
|
journal
|
April 2008 |
Numerical simulation of porous networks in relation to battery electrodes and separators
|
journal
|
July 2003 |
Poly(vinylidene fluoride-co-chlorotrifluoroethylene) (PVDF-CTFE) lithium-ion battery separator membranes prepared by phase inversion
|
journal
|
January 2015 |
A simple approach for preparation of porous polybenzimidazole membranes as a promising separator for lithium ion batteries
|
journal
|
January 2017 |
Poly(Vinylidene Difluoride) Soft Dendritic Colloids as Li-Ion Battery Separators
|
journal
|
February 2021 |
Poly(vinylidene fluoride) separators with dual-asymmetric structure for high-performance lithium ion batteries
|
journal
|
October 2016 |
Fabrication of surface skinless membranes of epoxy resin-based mesoporous monoliths toward advanced separators for lithium ion batteries
|
journal
|
January 2017 |
Enabling High-Energy, High-Voltage Lithium-Ion Cells: Standardization of Coin-Cell Assembly, Electrochemical Testing, and Evaluation of Full Cells
|
journal
|
January 2016 |
High electrochemical stability of polyvinylidene fluoride (PVDF) porous membranes using phase inversion methods for lithium-ion batteries
|
journal
|
October 2020 |
Thermal stability of lithium-ion battery electrolytes
|
journal
|
June 2003 |
Progress in polymeric separators for lithium ion batteries
|
journal
|
January 2015 |
Multi-Domain Modeling of Lithium-Ion Batteries Encompassing Multi-Physics in Varied Length Scales
|
journal
|
January 2011 |
Thermal stability of LiPF6–EC:EMC electrolyte for lithium ion batteries
|
journal
|
July 2001 |
Effects of separator breakdown on abuse response of 18650 Li-ion cells
|
journal
|
December 2007 |
Review—Multifunctional Separators: A Promising Approach for Improving the Durability and Performance of Li-Ion Batteries
|
journal
|
January 2019 |
Preparation and performance of aramid nanofiber membrane for separator of lithium ion battery
|
journal
|
April 2016 |
Microstructure and multifunctional properties of liquid + polymer bicomponent structural electrolytes: Epoxy gels and porous monoliths
|
journal
|
July 2015 |
Modeling stresses in the separator of a pouch lithium-ion cell
|
journal
|
October 2011 |
Three-Dimensional Modeling of Electrochemical Performance and Heat Generation of Lithium-Ion Batteries in Tabbed Planar Configurations
|
journal
|
January 2011 |