An initial magnet experiment using high-temperature superconducting STAR® wires

Wang, Xiaorong; Bogdanof, Timothy J.; Ferracin, Paolo; Ghiorso, William B.; Gourlay, Stephen A.; Higley, Hugh C.; Kadiyala, Janakiram Kaushal; Kar, Soumen; Lee, Reginald; Luo, Linqing; Maruszewski, Maxwell A.; Memmo, Robert; Myers, Cory S.; Prestemon, Soren O.; Sandra, Jithin Sai; Selvamanickam, Venkat; Teyber, Reed; Turqueti, Marcos; Wu, Yuxin

doi:10.1088/1361-6668/ac9f82

Title: An initial magnet experiment using high-temperature superconducting STAR^® wires

Journal Article · Mon Nov 14 00:00:00 EST 2022 · Superconductor Science and Technology

DOI:https://doi.org/10.1088/1361-6668/ac9f82· OSTI ID:1963465

^[1];

^[2];

^[1];

^[1]; Maruszewski, Maxwell A. ^[1];

^[1];

^[2];

^[3];

^[1];

^[1]

Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
AMPeers LLC, Houston, TX (United States)
University of Houston, TX (United States)

A dipole magnet generating 20 T and beyond will require high-temperature superconductors such as Bi₂Sr₂CaCu₂O_8-x and REBa₂Cu₃O_7-x (RE = rare earth, rebco). Symmetric tape round (star^®) wires based on rebco tapes are emerging as a potential conductor for such a magnet, demonstrating a whole-conductor current density of 580 A mm^-2 at 20 T, 4.2 K, and at a bend radius of 15 mm. There are, however, few magnet developments using star^® wires. Here we report a subscale canted cos$$\theta$$ dipole magnet as an initial experiment for two purposes: to evaluate the conductor performance in a magnet configuration and to start developing the magnet technology, leveraging the small bend radius afforded by star^® wires. The magnet was wound with two star^® wires, electrically in parallel and without transposition. We tested the magnet at 77 and 4.2 K. The magnet reached a peak current of 8.9 kA, 78% of the short-sample prediction at 4.2 K, and a whole-conductor current density of 1500 A mm^-2. The experiment demonstrated a minimum viable concept for dipole magnet applications using star^® wires. Here the results also allowed us to identify further development needs for star^® conductors and associated magnet technology to enable high-field rebco magnets.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

Sponsoring Organization:: USDOE Office of Science (SC), High Energy Physics (HEP)

Grant/Contract Number:: AC02-05CH11231; SC0015983

OSTI ID:: 1963465

Journal Information:: Superconductor Science and Technology, Vol. 35, Issue 12; ISSN 0953-2048

Publisher:: IOP PublishingCopyright Statement

Country of Publication:: United States

Language:: English

References (75)

Design of CCT6: A Large Aperture, Nb$_3$Sn Dipole Magnet for HTS Insert Testing Brouwer, L.; Juchno, M.; Arbelaez, D. IEEE Transactions on Applied Superconductivity, Vol. 32, Issue 6 https://doi.org/10.1109/TASC.2022.3151723	journal	September 2022
Fabrication of Bi-2212 Canted-Cosine-Theta Dipole Prototypes Garcia Fajardo, Laura; Brouwer, Lucas; Caspi, Shlomo IEEE Transactions on Applied Superconductivity, Vol. 29, Issue 5 https://doi.org/10.1109/TASC.2019.2896725	journal	August 2019
Status of the EuCARD 5.4-T REBCO Dipole Magnet Borgnolutti, F.; Durante, M.; Debray, F. IEEE Transactions on Applied Superconductivity, Vol. 26, Issue 4 https://doi.org/10.1109/TASC.2016.2535323	journal	June 2016
Superconducting Accelerator Magnets Based on High-Temperature Superconducting Bi-2212 Round Wires Shen, Tengming; Garcia Fajardo, Laura Instruments, Vol. 4, Issue 2 https://doi.org/10.3390/instruments4020017	journal	June 2020
Symmetric tape round REBCO wire with J e (4.2 K, 15 T) beyond 450 A mm −2 at 15 mm bend radius: a viable candidate for future compact accelerator magnet applications Kar, Soumen; Luo, Wenbo; Ben Yahia, Anis Superconductor Science and Technology, Vol. 31, Issue 4 https://doi.org/10.1088/1361-6668/aab293	journal	March 2018
Mathematical formulation to predict the harmonics of the superconducting Large Hadron Collider magnets Sammut, Nicholas; Bottura, Luca; Micallef, Joseph Physical Review Special Topics - Accelerators and Beams, Vol. 9, Issue 1 https://doi.org/10.1103/PhysRevSTAB.9.012402	journal	January 2006
Realization and First Test Results of the EuCARD 5.4-T REBCO Dipole Magnet Durante, Maria; Borgnolutti, Franck; Bouziat, Denis IEEE Transactions on Applied Superconductivity, Vol. 28, Issue 3 https://doi.org/10.1109/TASC.2018.2796063	journal	April 2018
Superconducting double-helix accelerator magnets Meinkeo, R. B.; Ball, M. J.; Goodzeit, C. L. Proceedings of the 2003 Particle Accelerator Conference https://doi.org/10.1109/PAC.2003.1288752	conference	January 2003
Degradation of the performance of a YBCO-coated conductor double pancake coil due to epoxy impregnation Takematsu, T.; Hu, R.; Takao, T. Physica C: Superconductivity and its Applications, Vol. 470, Issue 17-18 https://doi.org/10.1016/j.physc.2010.06.009	journal	September 2010
20 T Hybrid Nb₃Sn-HTS Block-Coil Designs for a Future Particle Collider Rochepault, E.; Ferracin, P.; Vallone, G. IEEE Transactions on Applied Superconductivity, Vol. 32, Issue 6 https://doi.org/10.1109/TASC.2022.3158643	journal	September 2022
Heating-Induced Performance Degradation of REBa₂Cu₃O_7–x Coated Conductors: An Oxygen Out-Diffusion Scenario with Two Activation Energies Bonura, Marco; Cayado, Pablo; Konstantopoulou, Konstantina ACS Applied Electronic Materials, Vol. 4, Issue 3 https://doi.org/10.1021/acsaelm.2c00065	journal	February 2022
A viable dipole magnet concept with REBCO CORC ^® wires and further development needs for high-field magnet applications Wang, Xiaorong; Caspi, Shlomo; Dietderich, Daniel R. Superconductor Science and Technology, Vol. 31, Issue 4 https://doi.org/10.1088/1361-6668/aaad8f	journal	March 2018
Design and test of a curved superconducting dipole magnet for proton therapy Brouwer, L.; Caspi, S.; Edwards, K. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 957 https://doi.org/10.1016/j.nima.2020.163414	journal	March 2020
Degradation Free Vacuum Epoxy Impregnated short REBCO Undulator Magnets Kesgin, I.; Hasse, Q.; Ivanyushenkov, Y. IOP Conference Series: Materials Science and Engineering, Vol. 279 https://doi.org/10.1088/1757-899X/279/1/012009	journal	December 2017
Powering of an HTS dipole insert-magnet operated standalone in helium gas between 5 and 85 K Nugteren, J. van; Kirby, G.; Bajas, H. Superconductor Science and Technology, Vol. 31, Issue 6 https://doi.org/10.1088/1361-6668/aab887	journal	April 2018
YBa ₂ Cu ₃ O _7−δ coated conductor cabling for low ac-loss and high-field magnet applications van der Laan, D. C. Superconductor Science and Technology, Vol. 22, Issue 6 https://doi.org/10.1088/0953-2048/22/6/065013	journal	April 2009
Quench Detection and Protection for High-Temperature Superconductor Accelerator Magnets Marchevsky, Maxim Instruments, Vol. 5, Issue 3 https://doi.org/10.3390/instruments5030027	journal	August 2021
Superconducting and Resistive Tilted Coil Magnets for Generation of High and Uniform Transverse Magnetic Field Akhmeteli, A. M.; Gavrilin, A. V.; Marshall, W. S. IEEE Transactions on Appiled Superconductivity, Vol. 15, Issue 2, p. 1439-1443 https://doi.org/10.1109/TASC.2005.849119	journal	June 2005
Removal of degradation of the performance of an epoxy impregnated YBCO-coated conductor double pancake coil by using a polyimide-electrodeposited YBCO-coated conductor Yanagisawa, Y.; Sato, K.; Piao, R. Physica C: Superconductivity, Vol. 476 https://doi.org/10.1016/j.physc.2012.01.025	journal	June 2012
Conceptual design of high transverse field magnets at the NHMFL Gavrilin, A. V.; Bird, M. D.; Bole, S. T. IEEE Transactions on Appiled Superconductivity, Vol. 12, Issue 1 https://doi.org/10.1109/TASC.2002.1018444	journal	March 2002
Engineering of second generation HTS coated conductor architecture to enhance the normal zone propagation velocity in various operating conditions Lacroix, C.; Sirois, F.; Lupien, J-H Fournier Superconductor Science and Technology, Vol. 30, Issue 6 https://doi.org/10.1088/1361-6668/aa684f	journal	May 2017
HTS twisted stacked-tape cable conductor Takayasu, Makoto; Chiesa, Luisa; Bromberg, Leslie Superconductor Science and Technology, Vol. 25, Issue 1 https://doi.org/10.1088/0953-2048/25/1/014011	journal	December 2011
Introduction of CORC ^® wires: highly flexible, round high-temperature superconducting wires for magnet and power transmission applications Weiss, Jeremy D.; Mulder, Tim; ten Kate, Herman J. Superconductor Science and Technology, Vol. 30, Issue 1 https://doi.org/10.1088/0953-2048/30/1/014002	journal	November 2016
Modeling and simulation of termination resistances in superconducting cables Zermeno, Victor; Krüger, Philipp; Takayasu, Makoto Superconductor Science and Technology, Vol. 27, Issue 12 https://doi.org/10.1088/0953-2048/27/12/124013	journal	November 2014
Degradation free epoxy impregnation of REBCO coils and cables Barth, C.; Bagrets, N.; Weiss, K-P Superconductor Science and Technology, Vol. 26, Issue 5 https://doi.org/10.1088/0953-2048/26/5/055007	journal	March 2013
Electromechanical Design of a 16-T CCT Twin-Aperture Dipole for FCC Auchmann, Bernhard; Brouwer, Lucas; Caspi, Shlomo IEEE Transactions on Applied Superconductivity, Vol. 28, Issue 3 https://doi.org/10.1109/TASC.2017.2772898	journal	April 2018
Canted–Cosine–Theta Magnet (CCT)—A Concept for High Field Accelerator Magnets Caspi, S.; Borgnolutti, F.; Brouwer, L. IEEE Transactions on Applied Superconductivity, Vol. 24, Issue 3 https://doi.org/10.1109/TASC.2013.2284722	journal	June 2014
A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors Uglietti, D. Superconductor Science and Technology, Vol. 32, Issue 5 https://doi.org/10.1088/1361-6668/ab06a2	journal	April 2019
Accelerator-Quality HTS Dipole Magnet Demonstrator Designs for the EuCARD-2 5-T 40-mm Clear Aperture Magnet Kirby, G. A.; Nugteren, J.; Ballarino, A. IEEE Transactions on Applied Superconductivity, Vol. 25, Issue 3 https://doi.org/10.1109/TASC.2014.2361933	journal	June 2015
Distributed Fiber Optic Sensing to Identify Locations of Resistive Transitions in REBCO Conductors and Magnets Luo, Linqing; Ferracin, Paolo; Stern, Jillian IEEE Transactions on Applied Superconductivity, Vol. 32, Issue 6 https://doi.org/10.1109/TASC.2022.3159507	journal	September 2022
Multipole magnets for the HIAF fragment separator using the Canted-Cosine-Theta (CCT) geometry Wu, Wei; Liang, Yu; Zhou, Lun-Cai Journal of Physics: Conference Series, Vol. 1401, Issue 1 https://doi.org/10.1088/1742-6596/1401/1/012015	journal	January 2020
The double-helix dipole-a novel approach to accelerator magnet design Goodzeit, C. L.; Ball, M. J.; Meinke, R. B. IEEE Transactions on Appiled Superconductivity, Vol. 13, Issue 2, p. 1365-1368 https://doi.org/10.1109/TASC.2003.812672	journal	June 2003
Hi-Lumi LHC Twin Aperture Orbit Correctors 0.5-m Model Magnet Development and Cold Test Kirby, Glyn A.; Gentini, Luca; Mazet, Jacky IEEE Transactions on Applied Superconductivity, Vol. 28, Issue 3 https://doi.org/10.1109/TASC.2017.2782683	journal	April 2018
Status of the Nb$_{3}$Sn Canted-Cosine-Theta Dipole Magnet Program at Lawrence Berkeley National Laboratory Arbelaez, Diego; Bogdanof, Timothy; Brouwer, Lucas IEEE Transactions on Applied Superconductivity, Vol. 32, Issue 6 https://doi.org/10.1109/TASC.2022.3155505	journal	September 2022
Modeling-Driven Optimization of Mechanically Robust REBCO Tapes and Wires Ben Yahia, Anis; Kar, Soumen; Majkic, Goran IEEE Transactions on Applied Superconductivity, Vol. 29, Issue 5 https://doi.org/10.1109/TASC.2019.2907234	journal	August 2019
Status of CORC ® cables and wires for use in high-field magnets and power systems a decade after their introduction van der Laan, D. C.; Weiss, J. D.; McRae, D. M. Superconductor Science and Technology, Vol. 32, Issue 3 https://doi.org/10.1088/1361-6668/aafc82	journal	February 2019
Assembly and Mechanical Analysis of the Canted-Cosine-Theta Subscale Magnets Fernandez, J. L. Rudeiros; Arbelaez, D.; Brouwer, L. IEEE Transactions on Applied Superconductivity, Vol. 32, Issue 6 https://doi.org/10.1109/TASC.2022.3166875	journal	September 2022
Degradation of REBCO coated conductors due to a combination of epoxy impregnation, thermal cycles, and quench: Characteristics and a method of alleviation Yin, Shijian; Duranti, Mattia; Swenson, Charles A. Journal of Applied Physics, Vol. 128, Issue 17 https://doi.org/10.1063/5.0026000	journal	November 2020
Quench detection method for 2G HTS wire Marchevsky, M.; Xie, Y-Y; Selvamanickam, V. Superconductor Science and Technology, Vol. 23, Issue 3 https://doi.org/10.1088/0953-2048/23/3/034016	journal	February 2010
Oxygen out-diffusion in REBCO coated conductor due to heating Lu, Jun; Xin, Yan; Jarvis, Brent Superconductor Science and Technology, Vol. 34, Issue 7 https://doi.org/10.1088/1361-6668/abfd0c	journal	May 2021
Non-twisted stacks of coated conductors for magnets: Analysis of inductance and AC losses Uglietti, Davide; Kang, Rui; Wesche, Rainer Cryogenics, Vol. 110 https://doi.org/10.1016/j.cryogenics.2020.103118	journal	September 2020
Towards 20 T Hybrid Accelerator Dipole Magnets Ferracin, P.; Ambrosio, G.; Arbelaez, D. IEEE Transactions on Applied Superconductivity, Vol. 32, Issue 6 https://doi.org/10.1109/TASC.2022.3152715	journal	September 2022
The EuCARD-2 Future Magnets European Collaboration for Accelerator-Quality HTS Magnets Rossi, L.; Badel, A.; Bajko, M. IEEE Transactions on Applied Superconductivity, Vol. 25, Issue 3 https://doi.org/10.1109/TASC.2014.2364215	journal	June 2015
CORC ^{$^{\circledR}$} cable terminations with integrated Hall arrays for quench detection Teyber, Reed; Marchevsky, Maxim; Prestemon, Soren Superconductor Science and Technology, Vol. 33, Issue 9 https://doi.org/10.1088/1361-6668/ab9ef3	journal	August 2020
Fiber optic quench detection for large-scale HTS magnets demonstrated on VIPER cable during high-fidelity testing at the SULTAN facility Salazar, Erica E.; Badcock, Rodney A.; Bajko, Marta Superconductor Science and Technology, Vol. 34, Issue 3 https://doi.org/10.1088/1361-6668/abdba8	journal	February 2021
Test of a NbTi Superconducting Quadrupole Magnet Based on Alternating Helical Windings Caspi, S.; Trillaud, F.; Godeke, A. IEEE Transactions on Applied Superconductivity, Vol. 19, Issue 3 https://doi.org/10.1109/TASC.2009.2017892	journal	June 2009
Development and performance of a 2.9 Tesla dipole magnet using high-temperature superconducting CORC ^® wires Wang, Xiaorong; Abraimov, Dmytro; Arbelaez, Diego Superconductor Science and Technology, Vol. 34, Issue 1 https://doi.org/10.1088/1361-6668/abc2a5	journal	December 2020
Introduction of the next generation of CORC ^® wires with engineering current density exceeding 650 A mm ⁻² at 12 T based on SuperPower’s ReBCO tapes containing substrates of 25 μ m thickness Weiss, J. D.; van der Laan, D. C.; Hazelton, D. Superconductor Science and Technology, Vol. 33, Issue 4 https://doi.org/10.1088/1361-6668/ab72c6	journal	February 2020
Optimized and practical electrical joints for CORC type HTS cables Mulder, T.; Dudarev, A.; van der Laan, D. C. IOP Conference Series: Materials Science and Engineering, Vol. 102 https://doi.org/10.1088/1757-899X/102/1/012026	journal	December 2015
Magnet Design Optimization for Future Hadron Colliders Kashikhin, Vadim; Lombardo, Vito; Velev, Gueorgui JACoW Publishing, Geneva, Switzerland https://doi.org/10.18429/JACoW-IPAC2019-THPTS084	text	January 2019
Superior critical current of Symmetric Tape Round (STAR) REBCO wires in ultra-high background fields up to 31.2 T Luo, Wenbo; Kar, Soumen; Li, Xiaofen Superconductor Science and Technology, Vol. 31, Issue 12 https://doi.org/10.1088/1361-6668/aaebe8	journal	November 2018
Present Status and Recent Developments of the Twisted Stacked-Tape Cable Conductor Takayasu, Makoto; Chiesa, Luisa; Allen, Nathaniel C. IEEE Transactions on Applied Superconductivity, Vol. 26, Issue 2 https://doi.org/10.1109/TASC.2016.2521827	journal	March 2016
Next-generation highly flexible round REBCO STAR wires with over 580 A mm −2 at 4.2 K, 20 T for future compact magnets Kar, Soumen; Sandra, Jithin Sai; Luo, Wenbo Superconductor Science and Technology, Vol. 32, Issue 10 https://doi.org/10.1088/1361-6668/ab3904	journal	August 2019
Test Results of CCT1—A 2.4 T Canted-Cosine-Theta Dipole Magnet Caspi, S.; Brouwer, L. N.; Lipton, T. IEEE Transactions on Applied Superconductivity, Vol. 25, Issue 3 https://doi.org/10.1109/TASC.2014.2369061	journal	June 2015
The EuCARD2 Future Magnets Program for Particle Accelerator High-Field Dipoles: Review of Results and Next Steps Rossi, Lucio; Chiuchiolo, Antonella; Dhalle, Marc IEEE Transactions on Applied Superconductivity, Vol. 28, Issue 3 https://doi.org/10.1109/TASC.2017.2784357	journal	April 2018
Quench detection using Hall sensors in high-temperature superconducting CORC ^® -based cable-in-conduit-conductors for fusion applications Weiss, J. D.; Teyber, R.; Marchevsky, M. Superconductor Science and Technology, Vol. 33, Issue 10 https://doi.org/10.1088/1361-6668/abaec2	journal	September 2020
Critical current retention of potted and unpotted REBCO Roebel cables under transverse pressure and thermal cycling Talantsev, E. F.; Badcock, R. A.; Mataira, R. Superconductor Science and Technology, Vol. 30, Issue 4 https://doi.org/10.1088/1361-6668/aa604f	journal	March 2017
Developing a Vacuum Pressure Impregnation Procedure for CORC Wires Stern, J.; Swanson, J.; Bogdanof, T. IEEE Transactions on Applied Superconductivity, Vol. 32, Issue 6 https://doi.org/10.1109/TASC.2022.3149733	journal	September 2022
Effect of variations in terminal contact resistances on the current distribution in high-temperature superconducting cables Willering, G. P.; van der Laan, D. C.; Weijers, H. W. Superconductor Science and Technology, Vol. 28, Issue 3 https://doi.org/10.1088/0953-2048/28/3/035001	journal	January 2015
Quench detection for high temperature superconductor magnets: a novel technique based on Rayleigh-backscattering interrogated optical fibers Scurti, F.; Ishmael, S.; Flanagan, G. Superconductor Science and Technology, Vol. 29, Issue 3 https://doi.org/10.1088/0953-2048/29/3/03LT01	journal	January 2016
Bi-2212 Canted-Cosine-Theta Coils for High-Field Accelerator Magnets Godeke, A.; Brouwer, L. N.; Caspi, S. IEEE Transactions on Applied Superconductivity, Vol. 25, Issue 3 https://doi.org/10.1109/TASC.2014.2369955	journal	June 2015
First demonstration of high current canted-cosine-theta coils with Bi-2212 Rutherford cables Garcia Fajardo, L.; Shen, T.; Wang, X. Superconductor Science and Technology, Vol. 34, Issue 2 https://doi.org/10.1088/1361-6668/abc73d	journal	January 2021
Enhancement of the transverse stress tolerance of RE BCO Roebel cables by epoxy impregnation Otten, S.; Dhallé, M.; Gao, P. Superconductor Science and Technology, Vol. 28, Issue 6 https://doi.org/10.1088/0953-2048/28/6/065014	journal	April 2015
VIPER: An industrially scalable high-current high temperature superconductor cable Hartwig, Zachary S.; Vieira, Rui; Sorbom, Brandon Nils Superconductor Science and Technology https://doi.org/10.1088/1361-6668/abb8c0	journal	September 2020
Fabrication and Electromagnetic Characterization of Ultrasmall Diameter REBCO Wires Luo, Wenbo; Kar, Soumen; Xu, Aixia IEEE Transactions on Applied Superconductivity, Vol. 27, Issue 4 https://doi.org/10.1109/TASC.2016.2641242	journal	June 2017
A new configuration for a dipole magnet for use in high energy physics applications Meyer, D. I.; Flasck, R. Nuclear Instruments and Methods, Vol. 80, Issue 2 https://doi.org/10.1016/0029-554X(70)90784-6	journal	April 1970
A 1.2 T canted cos θ dipole magnet using high-temperature superconducting CORC ® wires Wang, Xiaorong; Dietderich, Daniel R.; DiMarco, Joseph Superconductor Science and Technology, Vol. 32, Issue 7 https://doi.org/10.1088/1361-6668/ab0eba	journal	May 2019
The Advantages and Challenges of Helical Coils for Small Accelerators—A Case Study Witte, H.; Yokoi, T.; Sheehy, S. L. IEEE Transactions on Applied Superconductivity, Vol. 22, Issue 2 https://doi.org/10.1109/TASC.2012.2186135	journal	April 2012
Nb₃Sn Accelerator Magnets Schoerling, Daniel; Zlobin, Alexander V. Particle Acceleration and Detection https://doi.org/10.1007/978-3-030-16118-7	book	August 2019
HTS Accelerator Magnet and Conductor Development in Europe Rossi, Lucio; Senatore, Carmine Instruments, Vol. 5, Issue 1 https://doi.org/10.3390/instruments5010008	journal	February 2021
Effect of resin impregnation on the transverse pressure dependence of the critical current in Re BCO Roebel cables Gao, P.; Wessel, W. A. J.; Dhallé, M. Superconductor Science and Technology, Vol. 32, Issue 5 https://doi.org/10.1088/1361-6668/ab08bd	journal	April 2019
Numerical investigation of current distributions around defects in high temperature superconducting CORC^® cables Teyber, Reed; Marchevsky, Maxim; Martinez, Aurora Cecilia Araujo Superconductor Science and Technology, Vol. 35, Issue 9 https://doi.org/10.1088/1361-6668/ac86fd	journal	August 2022
Progress in scale-up of REBCO STAR™ wire for canted cosine theta coils and future strategies with enhanced flexibility Kar, Soumen; Sandra, Jithin Sai; Luo, Wenbo Superconductor Science and Technology, Vol. 33, Issue 9 https://doi.org/10.1088/1361-6668/ab9e41	journal	July 2020
Design, Construction and Test of a Model Superconducting Quadrupole for the Interaction Region of Super $B$ Factory Bosi, F.; Paoloni, E.; Fabbricatore, P. IEEE Transactions on Applied Superconductivity, Vol. 22, Issue 3 https://doi.org/10.1109/TASC.2011.2179389	journal	June 2012
An Electric-Circuit Model on the Inter-Tape Contact Resistance and Current Sharing for REBCO Cable and Magnet Applications Martinez, Aurora Cecilia Araujo; Ji, Qing; Prestemon, Soren O. IEEE Transactions on Applied Superconductivity, Vol. 30, Issue 4 https://doi.org/10.1109/TASC.2020.2972215	journal	June 2020

Similar Records

A 1.2 T canted cos $θ$ dipole magnet using high-temperature superconducting CORC^® wires

Journal Article · Tue May 21 00:00:00 EDT 2019 · Superconductor Science and Technology · OSTI ID:1963465

Wang, Xiaorong; Dietderich, Daniel R.; DiMarco, Joseph; +7 more

A viable dipole magnet concept with REBCO CORC^® wires and further development needs for high-field magnet applications

Journal Article · Tue Mar 06 00:00:00 EST 2018 · Superconductor Science and Technology · OSTI ID:1963465

Wang, Xiaorong; Caspi, Shlomo; Dietderich, Daniel R.; +7 more

Development and performance of a 2.9 Tesla dipole magnet using high-temperature superconducting CORC® wires

Journal Article · Tue Dec 08 00:00:00 EST 2020 · Superconductor Science and Technology · OSTI ID:1963465

Wang, Xiaorong; Abraimov, Dmytro; Arbelaez, Diego; +20 more

Related Subjects

75 CONDENSED MATTER PHYSICS
SUPERCONDUCTIVITY AND SUPERFLUIDITY
REBCO
magnet
STAR

Title: An initial magnet experiment using high-temperature superconducting STAR® wires

Citation Formats

References (75)

Similar Records

Related Subjects

Title: An initial magnet experiment using high-temperature superconducting STAR^® wires