Design and Use of a Penetrating Deposition Nozzle for Z-Pinning Additive Manufacturing
- University of Tennessee, Knoxville (UTK)
- ORNL
Fused Filament Fabrication (FFF) involves depositing material layer-by-layer to create athree-dimensional object. This method often demonstrates high mechanical anisotropy in theprinted structure, leading to a drop in the material strength of the part when comparing structuresalong the deposition plane (X/Y-Axis) versus across layers in the build direction (Z-Axis). Initialefforts to improve anisotropy led to the development of the Z-Pinning process, where continuouspins are deposited across layers in the Z-Axis. Z-pinning has demonstrated significant gains intoughness and inter-layer strength, particularly in fiber-reinforced materials. However, thisprocess can also create flaws in the structure that increase in severity and frequency as the pinsgrow in length and diameter. To mitigate this, a penetrating nozzle has been developed thatextends a fine-tipped extrusion nozzle deep into the pin cavity and simultaneously extrudesmaterial as it retracts. This study investigates the printability of the penetrating nozzle for simplegeometries and evaluates the resulting Z-pinning mesostructure. As a result of this study, theprototype penetrating nozzle design was analyzed and built. Through a pressure driven flowanalysis it was determined that the penetrating nozzle extruder can not only flow extrudefilament. After a transient thermal simulation it was found that after a pause of 15 secondsresume printing with no drop in heat at nozzle exit.
- Research Organization:
- Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC05-00OR22725
- OSTI ID:
- 1887657
- Resource Relation:
- Conference: International Solid Freeform Fabrication Symposium 2022 (SFF) - Austin, Texas, United States of America - 7/24/2022 8:00:00 AM-8/27/2022 8:00:00 AM
- Country of Publication:
- United States
- Language:
- English
Similar Records
Modeling the interfacial failure and resulting mechanical properties of z-pinned additively manufactured composites
Z-Pinning Approach for Reducing Mechanical Anisotropy of 3D Printed Parts