skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Conceptual monopile and tower sizing for the IEA Wind Task 37 Borssele reference wind farm

Journal Article · · Journal of Physics. Conference Series

This paper explores the preliminary design of the support structures for the IEA Wind Task 37 reference wind farm at the Borssele site III and IV. The study looks at two different design methods that might be used within larger wind farm system design optimization (i.e. lay-out, electrical systems, etc.). The first consists of a scaling tool that scales a detailed design according to the rated power, water depth, hub height and rotor diameter. The second is a physics-based optimization approach that relies on the WISDEM® design tool. This research compares the results of these two methods for the design of both the tower and monopile of the IEA 10-MW and 15-MW reference wind turbines at a range of sea depths (25 m, 30 m, 35 m, 40 m). The two tools yield very similar results in terms of monopile base diameter, support structure natural frequency and mass. WISDEM is then used to also investigate the sensitivity of the design to the tower top forces, wave conditions and the soil conditions. It is shown that tower top forces dominate the design. In general, large diameter structures can carry additional costs associated with manufacturing and transportation requirements. Thus, the paper is concluded with a trade-off study between mass and diameter that quantifies the effect of the reduction in monopile diameter with the increase in structural mass.

Research Organization:
National Renewable Energy Lab. (NREL), Golden, CO (United States)
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Renewable Power Office. Wind Energy Technologies Office
Grant/Contract Number:
AC36-08GO28308
OSTI ID:
1825874
Report Number(s):
NREL/JA-5000-79144; MainId:33370; UUID:c5fe6fc8-8a7c-4672-b5a7-14ee4a639227; MainAdminID:63125
Journal Information:
Journal of Physics. Conference Series, Vol. 2018, Issue 1; ISSN 1742-6588
Publisher:
IOP PublishingCopyright Statement
Country of Publication:
United States
Language:
English

References (9)

A new static p-y approach for piles with arbitrary dimensions in sand journal December 2015
Probabilistic structural assessment of conical grouted joint using numerical modelling journal June 2018
Influence of model parameters on the design of large diameter monopiles for multi‐megawatt offshore wind turbines at 50‐m water depths journal February 2019
Ultimate loads and response analysis of a monopile supported offshore wind turbine using fully coupled simulation journal February 2017
Analytical gradient-based optimization of offshore wind turbine substructures under fatigue and extreme loads journal May 2016
The Force Exerted by Surface Waves on Piles journal May 1950
Experiments on the flow past a circular cylinder at very high Reynolds number journal May 1961
Design and fatigue analysis of monopile foundations to support the DTU 10 MW offshore wind turbine journal October 2017
Design of monopiles for offshore wind turbines in 10 steps journal January 2017

Similar Records

Rapid approach for structural design of the tower and monopile for a series of 25 MW offshore turbines
Journal Article · Thu Jun 02 00:00:00 EDT 2022 · Journal of Physics. Conference Series · OSTI ID:1825874

IEA Wind TCP Task 55: The IEA Wind 740-10-MW Reference Offshore Wind Plants
Technical Report · Fri Mar 29 00:00:00 EDT 2024 · OSTI ID:1825874

IEA Wind Task 26: Offshore Wind Farm Baseline Documentation
Technical Report · Thu Jun 02 00:00:00 EDT 2016 · OSTI ID:1825874