A Core-Shell Structured Polysulfonamide-Based Composite Nonwoven Towards High Power Lithium Ion Battery Separator
|
journal
|
January 2013 |
Effect of calendering and temperature on electrolyte wetting in lithium-ion battery electrodes
|
journal
|
December 2019 |
A safe, high-rate and high-energy polymer lithium-ion battery based on gelled membranes prepared by electrospinning
|
journal
|
January 2011 |
Swelling and softening of lithium-ion battery separators in electrolyte solvents
|
journal
|
October 2015 |
Improved performances of lithium-ion batteries with a separator based on inorganic fibers
|
journal
|
January 2017 |
Safety issues caused by internal short circuits in lithium-ion batteries
|
journal
|
January 2018 |
Battery Separators
|
journal
|
October 2004 |
Diamond/γ-alumina band offset determination by XPS
|
journal
|
January 2021 |
Temperature and strain rate dependent behavior of polymer separator for Li-ion batteries
|
journal
|
April 2018 |
Effect of Al2O3 coatings prepared by RF sputtering on polyethylene separators for high-power lithium ion batteries
|
journal
|
October 2014 |
On electrolyte wetting through lithium-ion battery separators
|
journal
|
October 2020 |
Electrospun nanofiber-coated separator membranes for lithium-ion rechargeable batteries
|
journal
|
January 2013 |
Evaluation Residual Moisture in Lithium-Ion Battery Electrodes and Its Effect on Electrode Performance
|
journal
|
January 2016 |
Elucidation of Separator Effect on Energy Density of Li-Ion Batteries
|
journal
|
January 2019 |
Comparison between computer simulations and experimental data for high-rate discharges of plastic lithium-ion batteries
|
journal
|
June 2000 |
Strain distribution and failure mode of polymer separators for Li-ion batteries under biaxial loading
|
journal
|
February 2018 |
Heat transfer enhancement in a lithium-ion cell through improved material-level thermal transport
|
journal
|
December 2015 |
Mechanism of self-discharge in graphite–lithium anode
|
journal
|
February 2002 |
The Li-Ion Rechargeable Battery: A Perspective
|
journal
|
January 2013 |
How Do Li Atoms Pass through the Al 2 O 3 Coating Layer during Lithiation in Li-ion Batteries?
|
journal
|
July 2013 |
Characterization and performance evaluation of lithium-ion battery separators
|
journal
|
December 2018 |
High-rate lithium cycling in a scalable trilayer Li-garnet-electrolyte architecture
|
journal
|
January 2019 |
Thermal expansion/shrinkage measurement of battery separators using a dynamic mechanical analyzer
|
journal
|
October 2018 |
In Situ Formation of a Stable Interface in Solid-State Batteries
|
journal
|
June 2019 |
Storage characteristics of cathodes for Li-ion batteries
|
journal
|
August 1996 |
High performance separator coated with amino-functionalized SiO2 particles for safety enhanced lithium-ion batteries
|
journal
|
August 2017 |
High Temperature Stable Separator for Lithium Batteries Based on SiO2 and Hydroxypropyl Guar Gum
|
journal
|
October 2015 |
Novel Ceramic-Grafted Separator with Highly Thermal Stability for Safe Lithium-Ion Batteries
|
journal
|
July 2017 |
Thermal Conductivity of TiO 2 Nanotubes
|
journal
|
January 2013 |
Unexpected Improved Performance of ALD Coated LiCoO 2 /Graphite Li-Ion Batteries
|
journal
|
September 2012 |
Probing microstructure and electrolyte concentration dependent cell chemistry via operando small angle neutron scattering
|
journal
|
January 2019 |
Mesoporous Cladophora cellulose separators for lithium-ion batteries
|
journal
|
July 2016 |
Fluorination of MXene by Elemental F 2 as Electrode Material for Lithium‐Ion Batteries
|
journal
|
March 2019 |
X-ray photoelectron spectroscopy studies of Ti1-Al N (0 ≤ x ≤ 0.83) high-temperature oxidation: The crucial role of Al concentration
|
journal
|
September 2019 |
Superhydrophobic fluorinated POSS–PVDF-HFP nanocomposite coating on glass by electrospinning
|
journal
|
January 2012 |
Electrification of roads: Opportunities and challenges
|
journal
|
July 2015 |
Characterization of Surface Free Energy of Composite Electrodes for Lithium-Ion Batteries
|
journal
|
January 2018 |
Improved Functionality of Lithium-Ion Batteries Enabled by Atomic Layer Deposition on the Porous Microstructure of Polymer Separators and Coating Electrodes
|
journal
|
April 2012 |
Understanding self-discharge mechanism of layered nickel cobalt manganese oxide at high potential
|
journal
|
July 2015 |
Polyethylene separator activated by hybrid coating improving Li+ ion transference number and ionic conductivity for Li-metal battery
|
journal
|
February 2017 |
TiO2 ceramic-grafted polyethylene separators for enhanced thermostability and electrochemical performance of lithium-ion batteries
|
journal
|
April 2016 |
Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984)
|
journal
|
January 1985 |
Potential for widespread electrification of personal vehicle travel in the United States
|
journal
|
August 2016 |
Study of the Ti/Al2O3 interface
|
journal
|
January 1995 |
Novel poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) blends for battery separators in lithium-ion applications
|
journal
|
January 2013 |
Correlating the influence of porosity, tortuosity, and mass loading on the energy density of LiNi0.6Mn0.2Co0.2O2 cathodes under extreme fast charging (XFC) conditions
|
journal
|
October 2020 |
A review on the separators of liquid electrolyte Li-ion batteries
|
journal
|
January 2007 |
Temperature and Current Distribution in Thin-Film Batteries
|
journal
|
January 1999 |
Superficial modifications in TiO2 and Al2O3 ceramics
|
journal
|
June 2003 |