Encapsulant Void Breakdown Voltage Modeling & Experiments
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
For high voltage electrical devices, prevention of high voltage breakdown is critical for device function. Use of polymeric encapsulation such as epoxies is common, but these may include air bubbles or other voids of varying size. The present work aimed to model and experimentally determine the size dependence of breakdown voltage for voids in an epoxy matrix, as a step toward establishing size criteria for void screening. Effects were investigated experimentally for both one-dimensional metal/epoxy/air/epoxy/metal gap sizes from 50 μm to 10 mm, as well as spherical voids of 250 μm, 500 μm, 1 mm and 2 mm sizes. These experimental results were compared to modified Paschen curve and particle-in-cell discharge models; minimum breakdown voltages of 6 - 8.5 kV appeared to be predicted by 1D models and experiments, with minimum breakdown voltage for void sizes of 0.2 - 1 mm. In a limited set of 3D experiments on 250 μm, 500 μm, 1 mm and 2 mm voids within epoxy, the minimum breakdown voltages observed were 18.5 - 20 kV, for 500 μm void sizes. These experiments and models are aimed at providing initial size and voltage criteria for tolerable void sizes and expected discharge voltages to support design of encapsulated high voltage components.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE National Nuclear Security Administration (NNSA), Office of Defense Nuclear Security
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 1808742
- Report Number(s):
- SAND2020-12381; 697105
- Country of Publication:
- United States
- Language:
- English
Similar Records
Electrical design analysis and breakdown voltage test aspects of indigenously developed electrical breaks at Cryo temperatures
Pulsed Dielectric Breakdown of Aluminum Oxide (ALOX) Filled Epoxy Encapsulants: Effects of Formulation and Electric Stress Concentration