Multiple injection for improving knock, gaseous and particulate matter emissions in direct injection SI engines

Han, Taehoon; Singh, Ripudaman; Lavoie, George; Wooldridge, Margaret; Boehman, André

doi:10.1016/j.apenergy.2020.114578

Title: Multiple injection for improving knock, gaseous and particulate matter emissions in direct injection SI engines

Journal Article · Tue Feb 04 00:00:00 EST 2020 · Applied Energy

DOI:https://doi.org/10.1016/j.apenergy.2020.114578· OSTI ID:1799253

^[1];

^[1]; Lavoie, George ^[1]; Wooldridge, Margaret ^[1]; Boehman, André ^[1]

Univ. of Michigan, Ann Arbor, MI (United States)

Advances in fuel injector technology have enabled research and development on a large variety of direct injection spark ignition (DISI) engine fueling strategies targeted to improve engine performance and reduce engine-out emissions. This study explores the effect of multiple injections on knock, engine efficiency and stability, and particulate number and gaseous emissions on a single-cylinder DISI research engine. Work to date on multiple injections in the literature is reviewed, and then two aspects of multiple injection strategies are experimentally investigated: the number of injections (up to five times in a cycle); and the timing of the injections (classified relative to the timing of intake valve opening and closing). A boosted, single-cylinder research engine equipped with a state-of-the-art piezoelectric hollow cone spray direct injector and research-grade E10 gasoline was used for the study. The results show multiple injections maintain torque and combustion stability compared with single injection and slightly increase the knock limits and indicated thermal efficiencies (maximum 0.7% absolute, 2.8% relative compared with single-injection baseline) due to improved heat release phasing, especially with an additional late injection during the intake valve closed (compression stroke) period. The gaseous pollutant emissions including nitrogen oxides and unburned hydrocarbons were reduced by 25% with multiple injections, particularly with injection during the compression stroke. In contrast, carbon monoxide emissions increased with multiple injections for all conditions. Increasing the number of injection events significantly reduced particulate number emissions (half with each additional injection), and the decrease in particulate number was not sensitive to the injection timing.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Univ. of Michigan, Ann Arbor, MI (United States)

Sponsoring Organization:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Transportation Office. Vehicle Technologies Office; USDOE

Grant/Contract Number:: EE0006831

OSTI ID:: 1799253

Alternate ID(s):: OSTI ID: 2325297

Journal Information:: Applied Energy, Vol. 262; ISSN 0306-2619

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (74)

Spectroscopic measurements of nitric oxide in spark ignition engines Lavoie, George A. Combustion and Flame, Vol. 15, Issue 2 https://doi.org/10.1016/0010-2180(70)90021-0	journal	October 1970
Experimental and Theoretical Study of Nitric Oxide Formation in Internal Combustion Engines Lavoie, George A.; Heywood, John B.; Keck, James C. Combustion Science and Technology, Vol. 1, Issue 4 https://doi.org/10.1080/00102206908952211	journal	February 1970
Examination of nanoparticles from gasoline direct-injection (GDI) engines using transmission electron microscopy (TEM) Seong, H.; Choi, S.; Lee, K. International Journal of Automotive Technology, Vol. 15, Issue 2 https://doi.org/10.1007/s12239-014-0019-5	journal	March 2014
Effects of Engine Operating Parameters on Morphology of Particulates from a Gasoline Direct Injection (GDI) Engine Seong, HeeJe; Lee, Kyeong; Choi, Seungmok SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting, SAE Technical Paper Series https://doi.org/10.4271/2013-01-2574	conference	October 2013
Downsizing of Gasoline Engine: an Efficient Way to Reduce CO2 Emissions Leduc, P.; Dubar, B.; Ranini, A. Oil & Gas Science and Technology, Vol. 58, Issue 1 https://doi.org/10.2516/ogst:2003008	journal	January 2003
High-Speed, Multifuel Engine: L9204 FMV Urlaub, A. G.; Chmela, F. G. 1974 Automotive Engineering Congress and Exposition, SAE Technical Paper Series https://doi.org/10.4271/740122	conference	February 1974
‘FM’ - A High Efficiency Combustion System for the Future Light Duty Engine? Norris-Jones, S. R.; Russell, J. T. Passenger Car Meeting & Exposition, SAE Technical Paper Series https://doi.org/10.4271/820760	conference	June 1982
The influence of flash boiling conditions on spray characteristics with closely coupled split injection strategy Wang, Ziman; Jiang, Changzhao; Xu, Hongming Applied Energy, Vol. 187 https://doi.org/10.1016/j.apenergy.2016.11.089	journal	February 2017
Describing the uncertainties in experimental results Moffat, Robert J. Experimental Thermal and Fluid Science, Vol. 1, Issue 1 https://doi.org/10.1016/0894-1777(88)90043-X	journal	January 1988
An experimental database on the effects of single- and split injection strategies on spray formation and spark discharge in an optical direct-injection spark-ignition engine fuelled with gasoline, iso -octane and alcohols Serras-Pereira, Jose; Aleiferis, Pavlos G.; Richardson, Dave International Journal of Engine Research, Vol. 16, Issue 7 https://doi.org/10.1177/1468087414554936	journal	October 2014
Increasing energy efficiency of a gasoline direct injection engine through optimal synchronization of single or double injection strategies Costa, Michela; Sorge, Ugo; Allocca, Luigi Energy Conversion and Management, Vol. 60 https://doi.org/10.1016/j.enconman.2011.12.025	journal	August 2012
Enhanced heat release analysis for advanced multi-mode combustion engine experiments Ortiz-Soto, Elliott A.; Lavoie, George A.; Martz, Jason B. Applied Energy, Vol. 136 https://doi.org/10.1016/j.apenergy.2014.09.038	journal	December 2014
Split-Injection Strategies under Full-Load Using DMF, A New Biofuel Candidate, Compared to Ethanol in a GDI Engine Daniel, Ritchie; Wang, Chongming; Xu, Hongming SAE 2012 World Congress & Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2012-01-0403	conference	April 2012
Measurement of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions Nehmer, D. A.; Reitz, Rolf D. International Congress & Exposition, SAE Technical Paper Series https://doi.org/10.4271/940668	conference	March 1994
Microscopic and macroscopic characterization of spray impingement under flash boiling conditions with the application of split injection strategy Wang, Ziman; Li, Yanfei; Guo, Hengjie Fuel, Vol. 212 https://doi.org/10.1016/j.fuel.2017.10.028	journal	January 2018
Effects of pilot injection strategies on the flame temperature and soot distributions in an optical CI engine fueled with biodiesel and conventional diesel Jeon, Joonho; Park, Sungwook Applied Energy, Vol. 160 https://doi.org/10.1016/j.apenergy.2015.09.075	journal	December 2015
Understanding the Thermodynamics of Direct Injection Spark Ignition (DISI) Combustion Systems: An Analytical and Experimental Investigation Anderson, W.; Yang, J.; Brehob, D. D. 1996 SAE International Fall Fuels and Lubricants Meeting and Exhibition, SAE Technical Paper Series https://doi.org/10.4271/962018	conference	October 1996
Mechanism of Soot and NOx Emission Reduction Using Multiple-injection in a Diesel Engine Han, Zhiyu; Uludogan, All; Hampson, Gregory J. International Congress & Exposition, SAE Technical Paper Series https://doi.org/10.4271/960633	conference	February 1996
A Study of a Multistage Injection Mechanism for Improving the Combustion of Direct-Injection Gasoline Engines Imaoka, Yoshihiro; Shouji, Kiyotaka; Inoue, Takao SAE International Journal of Engines, Vol. 8, Issue 3 https://doi.org/10.4271/2015-01-0883	journal	January 2015
Effects of turbulence enhancement on combustion process using a double injection strategy in direct-injection spark-ignition (DISI) gasoline engines Kim, Taehoon; Song, Jingeun; Park, Sungwook International Journal of Heat and Fluid Flow, Vol. 56 https://doi.org/10.1016/j.ijheatfluidflow.2015.07.013	journal	December 2015
Investigations of multiple injection strategies for the improvement of combustion and exhaust emissions characteristics in a low compression ratio (CR) engine Suh, Hyun Kyu Applied Energy, Vol. 88, Issue 12 https://doi.org/10.1016/j.apenergy.2011.06.048	journal	December 2011
Review of motor vehicle particulate emissions sampling and measurement: From smoke and filter mass to particle number Giechaskiel, Barouch; Maricq, Matti; Ntziachristos, Leonidas Journal of Aerosol Science, Vol. 67 https://doi.org/10.1016/j.jaerosci.2013.09.003	journal	January 2014
Influence of single injection and two-stagnation injection strategy on thermodynamic process and performance of a turbocharged direct-injection spark-ignition engine fuelled with ethanol and gasoline blend Duan, Xiongbo; Liu, Jingping; Tan, Yonghao Applied Energy, Vol. 228 https://doi.org/10.1016/j.apenergy.2018.06.090	journal	October 2018
Split Injection in a DISI Engine Fuelled with Butanol and Gasoline Analyzed through Integrated Methodologies Merola, Simona Silvia; Irimescu, Adrian; Tornatore, Cinzia SAE International Journal of Engines, Vol. 8, Issue 2 https://doi.org/10.4271/2015-01-0748	journal	January 2015
Dual Fuel Injection (DI + PFI) for Knock and EGR Dilution Limit Extension in a Boosted SI Engine Han, Taehoon; Lavoie, George; Wooldridge, Margaret International Powertrains, Fuels & Lubricants Meeting, SAE Technical Paper Series https://doi.org/10.4271/2018-01-1735	conference	September 2018
Analysis of pre-ignition to super-knock: Hotspot-induced deflagration to detonation Wang, Zhi; Qi, Yunliang; He, Xin Fuel, Vol. 144 https://doi.org/10.1016/j.fuel.2014.12.061	journal	March 2015
Charge Cooling Effects on Knock Limits in SI DI Engines Using Gasoline/Ethanol Blends: Part 1-Quantifying Charge Cooling Kasseris, Emmanuel; Heywood, John B. SAE 2012 World Congress & Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2012-01-1275	conference	April 2012
Experimental Study of Post Injection Scheduling for Soot Reduction in a Light-Duty Turbodiesel Engine Martin, Jonathan; Sun, Chenxi; Boehman, Andre SAE 2016 World Congress and Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2016-01-0726	conference	April 2016
Examining the Relationship Between Black Carbon and Soot in Flames and Engine Exhaust Maricq, M. Matti Aerosol Science and Technology, Vol. 48, Issue 6 https://doi.org/10.1080/02786826.2014.904961	journal	April 2014
Elimination of Combustion Knock-Texaco Combustion Process Barber, E. M.; Reynolds, Blake; Tierney, W. T. Pre-1964 SAE Technical Papers, SAE Technical Paper Series https://doi.org/10.4271/510173	conference	January 1951
Effect of Syngas (H ₂ /CO) on SI Engine Knock under Boosted EGR and Lean Conditions Han, Taehoon; Lavoie, George; Wooldridge, Margaret SAE International Journal of Engines, Vol. 10, Issue 3 https://doi.org/10.4271/2017-01-0670	journal	February 2017
The Texaco Ignition System-A New Concept for Automotive Engines Canup, R. E. 1975 Automotive Engineering Congress and Exposition, SAE Technical Paper Series https://doi.org/10.4271/750347	conference	February 1975
A New Stratified Charge Combustion System (MCP) for Reducing Exhaust Emissions Miyake, M.; Okada, S.; Kawahara, Y. Combustion Science and Technology, Vol. 12, Issue 1-3 https://doi.org/10.1080/00102207608946706	journal	January 1976
Utilizing boost and double injections for enhanced stratified-charge direct-injection spark-ignition engine operation with gasoline and E30 fuels Zeng, Wei; Sjöberg, Magnus International Journal of Engine Research, Vol. 18, Issue 1-2 https://doi.org/10.1177/1468087416685512	journal	January 2017
Automotive Direct-Injection Stratified-Charge Engine Development in the 1970-1980’s Groff, Edward G. SAE 2016 World Congress and Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2016-01-0175	conference	April 2016
Combustion performance of bio-ethanol at various blend ratios in a gasoline direct injection engine Turner, Dale; Xu, Hongming; Cracknell, Roger F. Fuel, Vol. 90, Issue 5 https://doi.org/10.1016/j.fuel.2010.12.025	journal	May 2011
The engine knock analysis – An overview Zhen, Xudong; Wang, Yang; Xu, Shuaiqing Applied Energy, Vol. 92 https://doi.org/10.1016/j.apenergy.2011.11.079	journal	April 2012
The Effect of Knock on the Heat Transfer in an SI Engine: Thermal Boundary Layer Investigation using CARS Temperature Measurements and Heat Flux Measurements Grandin, Börje; Denbratt, Ingemar; Bood, Joakim International Fuels & Lubricants Meeting & Exposition, SAE Technical Paper Series https://doi.org/10.4271/2000-01-2831	conference	October 2000
Post Injections for Soot Reduction in Diesel Engines: A Review of Current Understanding O'Connor, Jacqueline; Musculus, Mark SAE International Journal of Engines, Vol. 6, Issue 1 https://doi.org/10.4271/2013-01-0917	journal	April 2013
Emissions from different alternative diesel fuels operating with single and split fuel injection Yehliu, Kuen; Boehman, André L.; Armas, Octavio Fuel, Vol. 89, Issue 2 https://doi.org/10.1016/j.fuel.2009.08.025	journal	February 2010
Effect of the Multiple Injection on Stratified Combustion Characteristics in a Spray-Guided DISI Engine Oh, Heechang; Bae, Choongsik; Park, Jungseo 10th International Conference on Engines & Vehicles, SAE Technical Paper Series https://doi.org/10.4271/2011-24-0059	conference	September 2011
Effect of split injection on stratified charge formation of direct injection spark ignition engines Li, T.; Nishida, K.; Zhang, Y. International Journal of Engine Research, Vol. 8, Issue 2 https://doi.org/10.1243/14680874JER02106	journal	April 2007
Fuel Injection Strategies to Increase Full-Load Torque Output of a Direct-Injection SI Engine Yang, Jialin; Anderson, Richard W. International Congress & Exposition, SAE Technical Paper Series https://doi.org/10.4271/980495	conference	February 1998
Scaling and dimensional methods to incorporate knock and flammability limits in models of high-efficiency gasoline and ethanol engines Lewis, Anne; Ortiz-Soto, Elliott; Lavoie, George International Journal of Engine Research, Vol. 16, Issue 2 https://doi.org/10.1177/1468087414530387	journal	May 2014
Effects of Fuel Injection Events of Ethanol and Gasoline Blends on Boosted Direct-Injection Engine Performance Singh, Ripudaman; Burch, Travis; Lavoie, George International Powertrains, Fuels & Lubricants Meeting, SAE Technical Paper Series https://doi.org/10.4271/2017-01-2238	conference	October 2017
On the Use of System Simulation to Explore the Potential of Innovative Combustion Systems: Methodology and Application to Highly Downsized SI Engines Running with Ethanol-Gasoline Blends Richard, Stephane; Font, Gregory; Le Berr, Fabrice SAE 2011 World Congress & Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2011-01-0408	conference	April 2011
Effects of the injection strategy on the mixture formation and combustion characteristics in a DISI (direct injection spark ignition) optical engine Song, Jingeun; Kim, Taehoon; Jang, Jihwan Energy, Vol. 93 https://doi.org/10.1016/j.energy.2015.10.058	journal	December 2015
Piston Heat Transfer Measurements Under Varying Knock Intensity in a Spark-Ignition Engine Syrimis, Michalis; Assanis, Dennis N. International Spring Fuels & Lubricants Meeting & Exposition, SAE Technical Paper Series https://doi.org/10.4271/971667	conference	May 1997
Split injection in a homogeneous stratified gasoline direct injection engine for high combustion efficiency and low pollutants emission Costa, M.; Sorge, U.; Merola, S. Energy, Vol. 117 https://doi.org/10.1016/j.energy.2016.03.065	journal	December 2016
Correlation Between Knock Intensity and Heat Transfer Under Light and Heavy Knocking Conditions in a Spark Ignition Engine Syrimis, Michalis; Shigahara, Kei; Assanis, Dennis N. International Congress & Exposition, SAE Technical Paper Series https://doi.org/10.4271/960495	conference	February 1996
An Insight Into Effect of Split Injection on Mixture Formation and Combustion of DI Gasoline Engines Li, Tie; Nishida, Keiya; Zhang, Yuyin 2004 SAE Fuels & Lubricants Meeting & Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2004-01-1949	conference	June 2004
Enhancement of Stratified Charge for DISI Engines through Split Injection(Effect and Its Mechanism): (Effect and Its Mechanism) Li, Tie; Nishida, Keiya; Zhang, Yuyin JSME International Journal Series B, Vol. 48, Issue 4 https://doi.org/10.1299/jsmeb.48.687	journal	January 2005
Particle Number Emissions Reduction Using Multiple Injection Strategies in a Boosted Spark-Ignition Direct-Injection (SIDI) Gasoline Engine Su, Jianye; Xu, Min; Yin, Peng SAE International Journal of Engines, Vol. 8, Issue 1 https://doi.org/10.4271/2014-01-2845	journal	October 2014
In-Cylinder Mechanisms of Soot Reduction by Close-Coupled Post-Injections as Revealed by Imaging of Soot Luminosity and Planar Laser-Induced Soot Incandescence in a Heavy-Duty Diesel Engine O'Connor, Jacqueline; Musculus, Mark SAE International Journal of Engines, Vol. 7, Issue 2 https://doi.org/10.4271/2014-01-1255	journal	April 2014
A New Deutz Multifuel System Finsterwalder, Gerhard 1972 Automotive Engineering Congress and Exposition, SAE Technical Paper Series https://doi.org/10.4271/720103	conference	February 1972
Modeling the Effect of Split Injections on DISI Engine Performance Stiesch, Gunnar; Merker, Guenter P.; Tan, Zhichao SAE 2001 World Congress, SAE Technical Paper Series https://doi.org/10.4271/2001-01-0965	conference	March 2001
Measurements of NO Emissions From a Stratified Charge Engine: Comparison of Theory and Experiment Lavoie, George A.; Blumberg, Paul N. Combustion Science and Technology, Vol. 8, Issue 1-2 https://doi.org/10.1080/00102207308946628	journal	September 1973
Single-Cylinder Proco Engine Studies - Fuel and Engine Calibration Effects on Emissions, Fuel Economy and Octane Number Requirements Hillyer, B. J.; Wade, W. R. Passenger Car Meeting & Exposition, SAE Technical Paper Series https://doi.org/10.4271/780593	conference	June 1978
Boosting and Direct Injection -Synergies for Future Gasoline Engines Lang, Oliver; Geiger, José; Habermann, Knut SAE 2005 World Congress & Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2005-01-1144	conference	April 2005
Ethanol Direct Injection on Turbocharged SI Engines - Potential and Challenges Kapus, P. E.; Fuerhapter, A.; Fuchs, H. SAE World Congress & Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2007-01-1408	conference	April 2007
Influence of Multiple Injection Strategies on Emissions, Combustion Noise and BSFC of a DI Common Rail Diesel Engine Badami, M.; Mallamo, F.; Millo, F. SAE 2002 World Congress & Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2002-01-0503	conference	March 2002
Fuel Injection and Positive Ignition A Basis for Improved Efficiency and Economy Davis, C. W.; Barber, E. M.; Mitchell, Edward Pre-1964 SAE Technical Papers, SAE Technical Paper Series https://doi.org/10.4271/610012	conference	January 1961
Turbocharging Concepts for Downsized DI Gasoline Engines Lake, Tim; Stokes, John; Murphy, Richard SAE 2004 World Congress & Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2004-01-0036	conference	March 2004
Knock Resistance and Fine Particle Emissions for Several Biomass-Derived Oxygenates in a Direct-Injection Spark-Ignition Engine Ratcliff, Matthew A.; Burton, Jonathan; Sindler, Petr SAE International Journal of Fuels and Lubricants, Vol. 9, Issue 1 https://doi.org/10.4271/2016-01-0705	journal	April 2016
Effects of Gasoline Direct Injection Engine Operating Parameters on Particle Number Emissions He, Xin; Ratcliff, Matthew A.; Zigler, Bradley T. Energy & Fuels, Vol. 26, Issue 4 https://doi.org/10.1021/ef201917p	journal	March 2012
Prediction of NO Formation in Spark-Ignited Engines—An Analysis of Methods of Control Blumberg, Paul; Kummer, J. T. Combustion Science and Technology, Vol. 4, Issue 1 https://doi.org/10.1080/00102207108952474	journal	September 1971
Engines and nanoparticles Kittelson, David B. Journal of Aerosol Science, Vol. 29, Issue 5-6 https://doi.org/10.1016/S0021-8502(97)10037-4	journal	June 1998
The Relation Between Knock and Exhaust Emissions of a Spark Ignition Engine Duke, L. C.; Lestz, S. S.; Meyer, W. E. 1970 Automotive Engineering Congress and Exposition, SAE Technical Paper Series https://doi.org/10.4271/700062	conference	February 1970
Experimental Optimization of the Cold Start for the EcoBoost Engine Reiche, David B.; Wooldridge, Steven T.; Moilanen, Peter C. SAE World Congress & Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2009-01-1491	conference	April 2009
A Performance Model for the Texaco Controlled Combustion, Stratified Charge Engine Jain, B. C.; Rife, J. M.; Keck, J. C. 1976 Automotive Engineering Congress and Exposition, SAE Technical Paper Series https://doi.org/10.4271/760116	conference	February 1976
Investigation of a Spark-Assisted Diesel Engine Phatak, R. G.; Komiyama, K. SAE International Congress and Exposition, SAE Technical Paper Series https://doi.org/10.4271/830588	conference	February 1983
Characterization of Mixture Formation Processes in DI Gasoline Engine Sprays with Split Injection Strategy via Laser Absorption and Scattering (LAS) Technique Li, Tie; Hiroyasu, Hiroyuki; Zhang, Yuyin SAE Powertrain & Fluid Systems Conference & Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2003-01-3161	conference	October 2003
Thermodynamic sweet spot for high-efficiency, dilute, boosted gasoline engines Lavoie, George A.; Ortiz-Soto, Elliott; Babajimopoulos, Aristotelis International Journal of Engine Research, Vol. 14, Issue 3 https://doi.org/10.1177/1468087412455372	journal	August 2012
Nanostructure and reactivity of soot produced from a turbodiesel engine using post injection Sun, Chenxi; Martin, Jonathan; Boehman, André L. Proceedings of the Combustion Institute, Vol. 37, Issue 1 https://doi.org/10.1016/j.proci.2018.06.101	journal	January 2019

Similar Records

Influence of Compression Ratio on High Load Performance and Knock Behavior for Gasoline Port-Fuel Injection, Natural Gas Direct Injection and Blended Operation in a Spark Ignition Engine

Conference · Wed Mar 01 00:00:00 EST 2017 · OSTI ID:1799253

Pamminger, Michael; Sevik, James; Scarcelli, Riccardo; +2 more

E85 Optimized Engine through Boosting, Spray-Optimized DIG, VCR and Variable Valvetrain

Technical Report · Tue May 31 00:00:00 EDT 2011 · OSTI ID:1799253

Confer, Keith; Husted, Harry

Effect of Premixed Fuel Preparation for Partially Premixed Combustion with a Low Octane Gasoline on a Light-Duty Multi-Cylinder Compression Ignition Engine

Journal Article · Tue May 12 00:00:00 EDT 2015 · Journal of Engineering for Gas Turbines and Power · OSTI ID:1799253

Dempsey, Adam B.; Curran, Scott; Wagner, Robert M.; +1 more

Related Subjects

42 ENGINEERING
split injection
injection region
number of injections
knock limit extension
particulate number
nitrogen oxides (NOx) emissions

Title: Multiple injection for improving knock, gaseous and particulate matter emissions in direct injection SI engines

Citation Formats

References (74)

Similar Records

Related Subjects