skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Re-Engineering Poly(Acrylic Acid) Binder toward Optimized Electrochemical Performance for Silicon Lithium-Ion Batteries: Branching Architecture Leads to Balanced Properties of Polymeric Binders

Journal Article · · Advanced Functional Materials

Silicon is a promising anode material for lithium-ion batteries with its superior capacity. However, the drastic volume changes during lithiation/delithiation cycles hinder the cycling performance, resulting in particle pulverization, conductivity loss, and an unstable electrode-electrolyte interface. In this work, a series of synthetic polymeric binders, poly(acrylic acid-co-tetra(ethylene glycol) diacrylate)-featuring a poly(acrylic acid) (PAA) backbone branched via tetra(ethylene glycol) diacrylate (TEGDA)-are developed that edge toward evidencing well-balanced properties to confront capacity fading in Si-based electrodes. The incorporation of ether chain not only leads to the branching architecture of the PAA backbone, thus affecting its mechanical properties, but also promotes the conductivity of Li ions. As a result, a synergistic performance improvement is observed in both half and full cells. The best-performing cell using a branched PAA binder (bPAA) with a feeding molar ratio ([TEGDA]:[acrylic acid(AA)]) of 0.2 results in a 10% increase in initial capacity and a 31% increase in capacity retention over 100 cycles compared to the linear PAA cell. The cross-sectional microscopic images of the cycled electrodes reveal that bPAA binders can drastically reduce the electrode expansion. This improvement results from the well-balanced properties of the polymer design, which could guide further development for more advanced binder materials.

Research Organization:
Argonne National Laboratory (ANL), Argonne, IL (United States). Center for Nanoscale Materials (CNM)
Sponsoring Organization:
USDOE Office of Science (SC), Basic Energy Sciences (BES); USDOE Office of Energy Efficiency and Renewable Energy (EERE), Transportation Office. Vehicle Technologies Office
Grant/Contract Number:
AC02-06CH11357; AC02‐06CH11357
OSTI ID:
1632851
Alternate ID(s):
OSTI ID: 1580540; OSTI ID: 1756183
Journal Information:
Advanced Functional Materials, Vol. 30, Issue 10; ISSN 1616-301X
Publisher:
WileyCopyright Statement
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 70 works
Citation information provided by
Web of Science

References (49)

Highly elastic binders integrating polyrotaxanes for silicon microparticle anodes in lithium ion batteries journal July 2017
A Highly Cross-Linked Polymeric Binder for High-Performance Silicon Negative Electrodes in Lithium Ion Batteries journal July 2012
A More Versatile Route to Block Copolymers and Other Polymers of Complex Architecture by Living Radical Polymerization:  The RAFT Process journal March 1999
Using Rheological Data To Determine the Branching Level in Metallocene Polyethylenes journal October 2000
Ionically Conductive Self-Healing Binder for Low Cost Si Microparticles Anodes in Li-Ion Batteries journal February 2018
Characterization of the stereochemical structure of poly(acrylic acid) by one- and two-dimensional 13C-1H nuclear magnetic resonance spectra journal January 1995
Reactivity ratios for acrylic acid–methyl acrylate copolymerization in 1,4-dioxane journal November 1976
Effect of Molecular Shape on Rheological Properties in Molecular Dynamics Simulation of Star, H, Comb, and Linear Polymer Melts journal July 2003
Issues and challenges facing rechargeable lithium batteries journal November 2001
Silicon-Based Anodes for Lithium-Ion Batteries: From Fundamentals to Practical Applications journal January 2018
Copolymerization reactivity ratios acrylic and methacrylic acids with butyl acrylate and butyl methacrylate journal February 1963
Enhanced Cycling Stability of Sulfur Electrodes through Effective Binding of Pyridine-Functionalized Polymer journal September 2017
Sodium Carboxymethyl Cellulose journal January 2007
Surface-Functionalized Silicon Nanoparticles as Anode Material for Lithium-Ion Battery journal November 2018
Stable Li-ion battery anodes by in-situ polymerization of conducting hydrogel to conformally coat silicon nanoparticles journal June 2013
Physically cross-linked polymer binder based on poly(acrylic acid) and ion-conducting poly(ethylene glycol-co-benzimidazole) for silicon anodes journal August 2017
Rheological behavior of star-shaped polymers journal July 1993
Poly(ethylene oxide)-based electrolytes for lithium-ion batteries journal January 2015
The existence of optimal molecular weight for poly(acrylic acid) binders in silicon/graphite composite anode for lithium-ion batteries journal February 2018
Phase Behavior of Blends of Poly(ethylene glycol) and Partially Neutralized Poly(acrylic acid) journal April 1995
Toward Efficient Binders for Li-Ion Battery Si-Based Anodes: Polyacrylic Acid journal October 2010
Physically Cross-linked Polymer Binder Induced by Reversible Acid–Base Interaction for High-Performance Silicon Composite Anodes journal October 2015
The Effects of Cross-Linking in a Supramolecular Binder on Cycle Life in Silicon Microparticle Anodes journal January 2016
Designing nanostructured Si anodes for high energy lithium ion batteries journal October 2012
Building better batteries journal February 2008
Rheological properties of linear and crosslinked polymer blends: Relation between crosslink density and enhancement of elongational viscosity journal January 2000
Promises and challenges of nanomaterials for lithium-based rechargeable batteries journal June 2016
A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries journal September 2011
Hollow Carbon Nanospheres with Superior Rate Capability for Sodium-Based Batteries journal May 2012
Enhancement of the Cyclability of a Si/Graphite@Graphene composite as anode for Lithium-ion batteries journal January 2014
Small things make a big difference: binder effects on the performance of Li and Na batteries journal January 2014
Living Free-Radical Polymerization by Reversible Addition−Fragmentation Chain Transfer:  The RAFT Process journal August 1998
Li-alloy based anode materials for Li secondary batteries journal January 2010
Effect of Side-Chain Branching on Enhancement of Ionic Conductivity and Capacity Retention of a Solid Copolymer Electrolyte Membrane journal November 2017
Correlation between glass transition temperature and chain structure for randomly crosslinked high polymers journal September 1996
High performance polymer binders inspired by chemical finishing of textiles for silicon anodes in lithium ion batteries journal January 2017
Confronting Issues of the Practical Implementation of Si Anode in High-Energy Lithium-Ion Batteries journal September 2017
Synthesis and Characterization of Branched Polyelectrolytes. 1. Preparation of Hyperbranched Poly(acrylic acid) via Self-Condensing Atom Transfer Radical Copolymerization journal December 2002
Size-exclusion chromatography (SEC) of branched polymers and polysaccharides journal October 2010
Understanding of pre-lithiation of poly(acrylic acid) binder: Striking the balances between the cycling performance and slurry stability for silicon-graphite composite electrodes in Li-ion batteries journal March 2019
Systematic Investigation of Binders for Silicon Anodes: Interactions of Binder with Silicon Particles and Electrolytes and Effects of Binders on Solid Electrolyte Interphase Formation journal May 2016
Influence of cross-link density on rheological properties of temperature-sensitive microgel suspensions journal September 2000
Living Radical Polymerization by the RAFT Process journal January 2005
Electrochemical performance and interfacial investigation on Si composite anode for lithium ion batteries in full cell journal August 2017
Water Soluble Binder, an Electrochemical Performance Booster for Electrode Materials with High Energy Density journal July 2017
Electron/Ion Transport Enhancer in High Capacity Li-Ion Battery Anodes journal September 2016
A Highly Cross-Linked Polymeric Binder for High-Performance Silicon Negative Electrodes in Lithium Ion Batteries journal July 2012
Living Radical Polymerization by the RAFT Process journal October 2005
Sodium Carboxymethyl Cellulose journal January 1985