Method of Electropolishing the Internal Surface of a Hollow Valve
|
patent
|
July 1949 |
Method of Electropolishing and Electrolytic Solution Therefor
|
patent
|
November 1958 |
Method for the electrolytic polishing of the inside surface hollow niobium bodies
|
patent
|
March 1977 |
Electrochemical machining of a titanium article
|
patent
|
December 1992 |
Electrochemical machining using modulated reverse electric fields
|
patent
|
June 2002 |
System and method for reversing electrolyte flow during an electropolishing operation
|
patent
|
August 2002 |
Sequential electromachining and electropolishing of metals and the like using modulated electric fields
|
patent
|
May 2003 |
Medical implant made of biocompatible low modulus high strength titanium-niobium alloy and method of using the same
|
patent
|
June 2004 |
Electroplating cell with hydrodynamics facilitating more uniform deposition across a workpiece during plating
|
patent
|
June 2009 |
Electroplating Process and Composition
|
patent-application
|
December 2006 |
Nano-Fabricated Superconducting Radio-Frequency Composites, Method for Producing Nano-Fabricated Superconducting RF Composites
|
patent-application
|
December 2009 |
Electrochemical Etching and Polishing of Conductive Substrates
|
patent-application
|
January 2011 |
The Limiting Rate of Deposition by P-R Plating
|
journal
|
January 1971 |
Electrodeposition of Gold by Pulsed Current
|
journal
|
January 1971 |
Impact of Forming, Welding, and Electropolishing on Pitting and the Surface Finish of SRF Cavity Niobium
|
journal
|
June 2011 |
Application of Chemical and Electrochemical Micromachining in the Electronics Industry
|
journal
|
January 1989 |
Fundamental aspects and applications of electrochemical microfabrication
|
journal
|
May 2000 |
AC Impedance Study of Anodically Formed Salt Films on Iron in Chloride Solution
|
journal
|
January 1992 |
Electrocrystallization in pulse electrolysis
|
journal
|
March 1978 |
Fundamental aspects of electropolishing
|
journal
|
January 1987 |
Calculation of the Optimal Geometry of Electrochemical Cells: Application to the Plating on Curved Electrodes
|
journal
|
January 2002 |
Achievement of in the superconducting nine-cell cavities for TESLA
- Lilje, L.; Kako, E.; Kostin, D.
-
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 524, Issue 1-3, p. 1-12
https://doi.org/10.1016/j.nima.2004.01.045
|
journal
|
May 2004 |
Development of electropolishing technology for superconducting cavities
|
conference
|
January 2003 |
MREF-ECM process for hard passive materials surface finishing
|
journal
|
January 2001 |
The Mechanism of Electropolishing of Niobium in Hydrofluoric–Sulfuric Acid Electrolyte
|
journal
|
January 2008 |
Copper Electropolishing in Concentrated Phosphoric Acid: I . Experimental Findings
|
journal
|
January 1995 |
Copper Electropolishing in Concentrated Phosphoric Acid: II . Theoretical Interpretation
|
journal
|
January 1995 |
The Application of Pulsed Current Electrolysis to a Rotating-Disk Electrode System: I . Mass Transfer
|
journal
|
January 1978 |
Current Distributions on Recessed Electrodes
|
journal
|
January 1991 |
Electrochemical planarization of interconnect metallization
|
journal
|
January 2005 |
Electrohydrodynamic impedance study of anodically formed salt films on iron in chloride solutions
|
journal
|
July 1992 |
Smooth Nb surfaces fabricated by buffered electropolishing
|
journal
|
January 2007 |
Duplex diffusion layer model for pulse with reverse plating
|
journal
|
January 1997 |