Superconducting Resonators Development for the FRIB and ReA Linacs at MSU: Recent Achievements and Future Goals
The superconducting driver and post-accelerator linacs of the FRIB project, the large scale radioactive beam facility under construction at MSU, require the construction of about 400 low-{beta} Quarter-wave (QWR) and Half-wave resonators (HWR) with four different optimum velocities. 1st and 2nd generation prototypes of {beta}{sub 0} = 0.041 and 0.085 QWRs and {beta}{sub 0} = 0.53 HWRs have been built and tested, and have more than fulfilled the FRIB and ReA design goals. The present cavity surface preparation at MSU allowed production of low-{beta} cavities nearly free from field emission. The first two cryostats of {beta}{sub 0} = 0.041 QWRs are now in operation in the ReA3 linac. A 3rd generation design of the FRIB resonators allowed to further improve the cavity parameters, reducing the peak magnetic field in operation and increasing the possible operation gradient, with consequent reduction of the number of required resonators. The construction of the cavities for FRIB, which includes three phases for each cavity type (development, pre-production and production runs) has started. Cavity design, construction, treatment and performance will be described and discussed.
- Research Organization:
- Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC)
- DOE Contract Number:
- AC05-06OR23177
- OSTI ID:
- 1047809
- Report Number(s):
- JLAB-ACC-12-1510; DOE/OR/23177-2255; DE-SC0000661; TRN: US1204043
- Resource Relation:
- Conference: IPAC 2012, 20-25 May 2012, New Orleans, Louisiana
- Country of Publication:
- United States
- Language:
- English
Similar Records
Multipacting Simulation on Half Wave Resonantor for Beta 0.53
RIA Superconducting Drift Tube Linac R & D