The design and manufacture of the Fermilab Main Injector Dipole Magnet
Fermilab`s new Main Injector Ring (MIR) will replace the currently operating Main Ring to provide 150 GeV Proton and Antiproton beams for Tevetron injection, and rapid cycling, high intensity, 120 GeV Proton beams for Antiproton production. To produce and maintain the required high beam quality, high intensity, and high repetition rate, conventional dipole magnets with laminated iron core and water cooled copper conductor were chosen as the bending magnet. A new magnet design having low inductance, large copper cross section, and field uniformity sufficient for high intensity injection and efficient slow resonant extraction, is required to obtain the needed geometric aperture, dynamic aperture, and operational reliability. The current Main Injector Ring lattice design requires the use of 344 of these magnets. 216 of these magnets are to be 6 m long, and 128 are to be 4 m long.
- Research Organization:
- Fermi National Accelerator Lab., Batavia, IL (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC02-76CH03000
- OSTI ID:
- 10179731
- Report Number(s):
- FNAL/C-92/89; CONF-920315-43; ON: DE92040899
- Resource Relation:
- Conference: EPAC 92: 3. European particle accelerator conference: accelerators for special applications,Berlin (Germany),24-28 Mar 1992; Other Information: PBD: Mar 1992
- Country of Publication:
- United States
- Language:
- English
Similar Records
Stability of beam in the Fermilab Main Injector
Space charge measurements with a high intensity bunch at the Fermilab Main Injector