COMPENSATION OF FAST KICKER ROLLS WITH SKEW QUADRUPOLES
The development of the third generation light sources lead to the implementation of the top-up operation, when injection occurs while users collect data. The beam excursions due to the non-closure of the injection bump can spoil the data and need to be suppressed. In the horizontal plane compensation can be achieved by adjusting timing and kick amplitudes. The rolls of the kicker magnets create non-closure in the vertical plane and usually there is no means for correction. In the paper we describe proposed compensation scheme utilizing two skew quadrupoles placed inside the injection bump. The third generation light sources implement top-up operation firstly introduced at Advanced Photon Source. In this mode the circulating beam current is supported near constant by frequent injection of small charge, while photon beam is delivered for users. The beam perturbations caused by the mismatched injection bump can provide undesired noise in the user data. Usually the injection trigger is distributed to the users end stations so that those affected would be able to blank data acquisition. Nevertheless, as good operational practice such transients should be suppressed as much as possible. In the horizontal plane (which is commonly used for injection) one can adjust individual kicker strength as well as trigger delay while observing motion of the stored beam centroid. In the vertical plane such means are unavailable in the most cases. The possible solutions include dedicated weak vertical kickers and motorized adjustment of the roll angle of the injection kickers. Both abovementioned approaches are expensive and can significantly deteriorate reliability. We suggest two employ two skew quadrupoles (to correct both angle and position) placed inside the injection bump. In this case the beam position itself serves as measure of the kicker strength (assuming that kickers are well matched) and vertical kicks from the skew quadrupoles will be self synchronized with injection bump. In this paper we will consider the case when injection hardware (kickers and septa) are located in the same straight. Such an approach simplifies consideration but it can be generalized.
- Research Organization:
- Brookhaven National Lab. (BNL), Upton, NY (United States). National Synchrotron Light Source
- Sponsoring Organization:
- DOE - Office Of Science
- DOE Contract Number:
- DE-AC02-98CH10886
- OSTI ID:
- 1012576
- Report Number(s):
- BNL-94853-2011-CP; TRN: US1102318
- Resource Relation:
- Conference: 2011 Particle Accelerator Conference; New York, NY; 20110328 through 20110401
- Country of Publication:
- United States
- Language:
- English
Similar Records
Effects and Correction of Closed Orbit Magnet Errors in the SNS Ring
Coil Creep and Skew-Quadrupole Field Components in the Tevatron
Related Subjects
ACCELERATORS
ADVANCED PHOTON SOURCE
AMPLITUDES
BEAM CURRENTS
BEAM POSITION
DATA ACQUISITION
IMPLEMENTATION
KICKER MAGNETS
LIGHT SOURCES
PHOTON BEAMS
QUADRUPOLES
RELIABILITY
TRANSIENTS
kicker magnets create non-closure
beam centroid
deflection angle
national synchrotron light source