skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Insights into good hot oiling practices

Conference ·
OSTI ID:6947828
 [1];  [2]
  1. Sandia National Labs., Albuquerque, NM (United States)
  2. Petrolite Corp. (United States)

One of the common oil-field wellbore problems is paraffin deposition. Even though hot oiling is usually the first method tried for removing paraffin, few operators appreciate the limitations of hot oiling and the potential for hot oiling to aggravate well problems and cause formation damage. Several hot oiling jobs were monitored to understand old pumpers tales'' and the dynamics of hot oiling. The field work was supported with laboratory analyses of the oil and calculations of thermal effectiveness. This limited study has shown that the chemical and thermal processes that occur during hot oiling are very complex and that there are significant variations in practices among operators. Key findings of this work include: (1) During a typical hot oiling job, a significant amount of the oil injected into the annulus goes into the formation, and hence, has the potential to damage the formation. (2) Organic particulates in stock tank oil may not completely dissolve/met as the oil passes through the hot-oiling-truck heat exchanger, hence, these particulates may plug the formation. (3) Hot oiling can vaporize oil in the tubing faster than the pump lifts oil. This interrupts paraffin removal from the well, and thus, since the wax is not removed from the well the wax is refined into harder deposits, can go deeper into the well, and can stick rods. These insights have been used to determine good hot oiling practices designed to maximize wax removal and minimize formation damage.

Research Organization:
Sandia National Labs., Albuquerque, NM (United States)
Sponsoring Organization:
USDOE; USDOE, Washington, DC (United States)
DOE Contract Number:
AC04-76DP00789
OSTI ID:
6947828
Report Number(s):
SAND-92-1697C; CONF-930320-1; SPE-25484; ON: DE93005351
Resource Relation:
Conference: 8. production operations symposium and exhibition, Oklahoma City, OK (United States), 21-23 Mar 1993
Country of Publication:
United States
Language:
English