Roll and roll-to-roll process scaling through development of a compact flexo unit for printing of back electrodes
|
journal
|
September 2015 |
Diamond micro engraving of gravure roller mould for roll-to-roll printing of fine line electronics
|
journal
|
November 2015 |
Scaling and Optimization of Gravure-Printed Silver Nanoparticle Lines for Printed Electronics
|
journal
|
March 2010 |
High-Performance Printed Transistors Realized Using Femtoliter Gravure-Printed Sub-10 μm Metallic Nanoparticle Patterns and Highly Uniform Polymer Dielectric and Semiconductor Layers
|
journal
|
May 2012 |
Cell Filling in Gravure Printing for Printed Electronics
|
journal
|
November 2014 |
Printing mesoscale architectures
|
journal
|
November 2015 |
Development of sequential build-up multilayer printed wiring boards in Japan
|
journal
|
September 2003 |
3D Printing multifunctionality: structures with electronics
|
journal
|
March 2014 |
Electrohydrodynamic direct-writing
|
journal
|
January 2013 |
Slurry-based additive manufacturing of ceramic parts by selective laser burn-out
|
journal
|
March 2015 |
From Printed Transistors to Printed Smart Systems
|
journal
|
April 2015 |
Printed electronics for low-cost electronic systems: Technology status and application development
|
conference
|
September 2008 |
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
|
journal
|
July 2015 |
Nanoinks in inkjet metallization — Evolution of simple additive-type metal patterning
|
journal
|
April 2014 |
Room-temperature sintering of conductive Ag films on paper
|
journal
|
May 2014 |
Current Collecting Grids for ITO-Free Solar Cells
|
journal
|
November 2011 |
Designing colloidal suspensions for directed materials assembly
|
journal
|
February 2011 |
Synthesis of monodisperse silver nanoparticles for ink-jet printed flexible electronics
|
journal
|
September 2011 |
Metal-based Inkjet Inks for Printed Electronics
|
journal
|
March 2011 |
Coalescence of Silver Nanoparticles at Room Temperature: Unusual Crystal Structure Transformation and Dendrite Formation Induced by Self-Assembly
|
journal
|
January 2009 |
Size and mechanics effects in surface-induced melting of nanoparticles
|
journal
|
April 2011 |
Size-dependent melting of nanoparticles: Hundred years of thermodynamic model
|
journal
|
April 2009 |
Optical detection of melting point depression for silver nanoparticles via in situ real time spectroscopic ellipsometry
|
journal
|
January 2012 |
Size-dependent melting: Numerical calculations of the phonon spectrum
|
journal
|
March 2009 |
Liquid-like pseudoelasticity of sub-10-nm crystalline silver particles
|
journal
|
October 2014 |
Liquidlike sintering behavior of nanometric Fe and Cu powders: Experimental approach
|
journal
|
December 1998 |
Tin Nanoparticle-Based Solder Paste for Low Temperature Processing
|
journal
|
October 2013 |
Substrate effect on the melting temperature of gold nanoparticles
|
journal
|
June 2012 |
Direct fabrication of electrically functional microstructures by fully voltage-controlled electrohydrodynamic jet printing of silver nano-ink
|
journal
|
May 2010 |
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
|
journal
|
January 2008 |
Additive Manufacturing Technologies Compared: Morphology of Deposits of Silver Ink Using Inkjet and Aerosol Jet Printing
|
journal
|
January 2015 |
Thermal decomposition as route for silver nanoparticles
|
journal
|
November 2006 |
Thermal behavior of direct-printed lines of silver nanoparticles
|
journal
|
December 2006 |
Inkjet printing of conductive Ag lines and their electrical and mechanical characterization
|
journal
|
September 2010 |
Low temperature sintering of Ag nanoparticles for flexible electronics packaging
|
journal
|
October 2010 |
Direct writing of copper conductive patterns by ink-jet printing
|
journal
|
July 2007 |
Inkjet printed electronics for multifunctional composite structure
|
journal
|
June 2009 |
Controlling the Thickness of the Surface Oxide Layer on Cu Nanoparticles for the Fabrication of Conductive Structures by Ink-Jet Printing
|
journal
|
March 2008 |
Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation Stability
|
journal
|
September 2010 |
Effect of Carboxylic Acid on Sintering of Inkjet-Printed Copper Nanoparticulate Films
|
journal
|
June 2011 |
Copper Nanoparticles: Aqueous Phase Synthesis and Conductive Films Fabrication at Low Sintering Temperature
|
journal
|
March 2013 |
Electrical sintering of nanoparticle structures
|
journal
|
March 2008 |
Ink-jet Printing and Microwave Sintering of Conductive Silver Tracks
|
journal
|
August 2006 |
Experimental study of the impact of an ink-jet printed droplet on a solid substrate
|
journal
|
August 2004 |
Limits to feature size and resolution in ink jet printing
|
journal
|
March 2009 |
Ink-Jet Printing of Zirconia: Coffee Staining and Line Stability
|
journal
|
July 2011 |
Control of Colloidal Particle Deposit Patterns within Picoliter Droplets Ejected by Ink-Jet Printing
|
journal
|
April 2006 |
Direct writing of silver conductive patterns: Improvement of film morphology and conductance by controlling solvent compositions
|
journal
|
December 2006 |
Inkjet Printing of Well-Defined Polymer Dots and Arrays
|
journal
|
August 2004 |
Preserving Precision of Inkjet-Printed Features with Solvents of Different Volatilities
|
journal
|
August 2013 |
Controllable synthesis and sintering of silver nanoparticles for inkjet-printed flexible electronics
|
journal
|
November 2015 |
Advanced Package Prototyping Using Nano-Particle Silver Printed Interconnects
|
journal
|
April 2010 |
Sintering of Alkanethiol-Capped Gold and Platinum Nanoclusters
|
journal
|
December 2002 |
Selective laser sintering of Ag nanoparticles ink for applications in flexible electronics
|
journal
|
May 2015 |
Excimer laser sintering of indium tin oxide nanoparticles for fabricating thin films of variable thickness on flexible substrates
|
journal
|
March 2015 |
Photosintering and electrical performance of CuO nanoparticle inks
|
journal
|
August 2014 |
Flash light sintering of nickel nanoparticles for printed electronics
|
journal
|
January 2014 |
Photonic curing of sol–gel derived HfO2 dielectrics for organic field-effect transistors
|
journal
|
December 2014 |
Inkjet-printed copper electrodes using photonic sintering and their application to organic thin-film transistors
|
journal
|
October 2015 |
Instant electrode fabrication on carbon-fiber-reinforced plastic structures using metal nano-ink via flash light sintering for smart sensing
|
journal
|
July 2015 |
Femtosecond laser three-dimensional micro- and nanofabrication
|
journal
|
December 2014 |
Ink-jet printing and camera flash sintering of silver tracks on different substrates
|
journal
|
November 2010 |
Multi-pulsed white light sintering of printed Cu nanoinks
|
journal
|
September 2011 |
In situ monitoring of flash-light sintering of copper nanoparticle ink for printed electronics
|
journal
|
November 2012 |
In situmonitoring of a flash light sintering process using silver nano-ink for producing flexible electronics
|
journal
|
December 2012 |
Polycrystalline silicon foils by flash lamp annealing of spray-coated silicon nanoparticle dispersions
|
journal
|
June 2015 |
Thermal Spray Applications in Electronics and Sensors: Past, Present, and Future
|
journal
|
February 2010 |
Sensors for Harsh Environments by Direct-Write Thermal Spray
|
journal
|
February 2004 |
Spinel humidity sensors prepared by thermal spray direct writing
|
journal
|
May 2005 |
The magnetic properties of plasma-sprayed thick-film manganese zinc ferrite (MZF) and nickel iron alloy (Permalloy) composites
|
journal
|
April 2006 |
Room Temperature Impact Consolidation (RTIC) of Fine Ceramic Powder by Aerosol Deposition Method and Applications to Microdevices
|
journal
|
March 2008 |
Aerosol deposition for post-LTCC
|
journal
|
January 2007 |
Magnetic properties and microwave characteristics of Ni–Zn–Cu ferrite film fabricated by aerosol deposition method
|
journal
|
April 2005 |
Aerosol Deposition of Ceramic Thick Films at Room Temperature: Densification Mechanism of Ceramic Layers
|
journal
|
June 2006 |
Aerosol Deposition Method for Fabrication of Nano Crystal Ceramic Layer
|
journal
|
March 2004 |
Powder preparation for 0.5 Pb(Ni1/3Nb2/3)O3–0.15 PbZrO3–0.35PbTiO3 thick films by the aerosol deposition method
|
journal
|
February 2005 |
Piezoelectric properties and poling effect of Pb(Zr, Ti)O3 thick films prepared for microactuators by aerosol deposition
|
journal
|
September 2000 |
Aerosol Codeposition of Ceramics: Mixtures of Bi 2 O 3 -TiO 2 and Bi 2 O 3 -V 2 O 5
|
journal
|
December 2014 |
Effect of applied field during aerosol deposition on the anisotropy of Sm–Fe–N thick films
|
journal
|
April 2005 |
PLZT films prepared by aerosol deposition and their birefringence evaluation
|
journal
|
January 2007 |
Characterization of as-deposited and sintered yttrium iron garnet thick films formed by aerosol deposition
|
journal
|
February 2014 |
Deposition mechanism of dry sprayed ceramic particles at room temperature using a nano-particle deposition system
|
journal
|
April 2011 |
Shock-induced plasticity and fragmentation phenomena during alumina deposition in the vacuum kinetic spraying process
|
journal
|
April 2015 |
Nanoparticulated Dense and Stress-Free Ceramic Thick Film for Material Integration: Nanoparticulated Ceramic Film for Material Integration
|
journal
|
September 2013 |
Powder Preparation in Aerosol Deposition Method for Lead Zirconate Titanate Thick Films
|
journal
|
November 2002 |
Room Temperature Deformation Mechanisms of Alumina Particles Observed from In Situ Micro-compression and Atomistic Simulations
|
journal
|
September 2015 |
Influence of Carrier Gas Composition on the Stress of Al2O3 Coatings Prepared by the Aerosol Deposition Method
|
journal
|
August 2014 |
Dielectric Properties of Nanograined BaTiO3 Ceramics Fabricated by Aerosol Deposition Method
|
journal
|
July 2011 |
Direct Write Electronics – Thick Films on LTCC
|
journal
|
October 2014 |