Cyclic deformation and lattice strain distribution of high Nb containing TiAl alloy
Abstract
Low cycle fatigue of lamellar TiAl with 8.5 at.-%Nb was studied with a total strain amplitude of 0.28% at three temperatures: room temperature, 750°C and 900°C. At room temperature, the material exhibited cyclic hardening and the fracture mode was mainly interlamellar. At 750°C and 900°C, the material showed cyclic softening and the fracture mode was translamellar. The lattice strain in γ phase was almost tensile and larger tensile lattice strain in γ phase seems detrimental. Besides, the opposite direction of {201}γ and {100}α2 lead to crack propagation along α2/γ interfaces. B2/βo phase always suffered compressive lattice strain in the tests. Finally, the destruction of lamellar microstructure was the reason for colony refinement at 750°C and 900°C.
- Authors:
-
- Nanjing Tech University, Nanjing (China). Tech Institute for Advanced Materials; Nanyang Technological Univ. (Singapore). School of Material Science and Engineering
- Nanjing Tech University, Nanjing (China). Tech Institute for Advanced Materials
- Nanyang Technological Univ. (Singapore). School of Material Science and Engineering
- University of Science and Technology Beijing, Beijing (China). State Key Laboratory for Advanced Metals and Materials
- Argonne National Lab. (ANL), Argonne, IL (United States). Advanced Photon Source (APS)
- Publication Date:
- Research Org.:
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Sponsoring Org.:
- USDOE; China Scholarship Council; China Postdoctoral Science Foundation; National Natural Science Foundation of China (NSFC); China Scholarship Council (CSC)
- OSTI Identifier:
- 1774348
- Grant/Contract Number:
- AC02-06CH11357; 2020M671457; 201908320194; 201908320195; 51671016; 2019K005
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Materials Science and Technology
- Additional Journal Information:
- Journal Volume: 36; Journal Issue: 14; Journal ID: ISSN 0267-0836
- Publisher:
- Taylor & Francis
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; TiAl alloys; low cycle fatigue; cyclic stress–strain behaviour; recrystallization; phase transformation; fracture behaviour
Citation Formats
Ding, Jie, Shi, Shan, Dong, Zhili, Lin, Junpin, Ren, Yang, Wu, Xiaodong, Chang, Hui, and Zhou, Lian. Cyclic deformation and lattice strain distribution of high Nb containing TiAl alloy. United States: N. p., 2020.
Web. doi:10.1080/02670836.2020.1795994.
Ding, Jie, Shi, Shan, Dong, Zhili, Lin, Junpin, Ren, Yang, Wu, Xiaodong, Chang, Hui, & Zhou, Lian. Cyclic deformation and lattice strain distribution of high Nb containing TiAl alloy. United States. https://doi.org/10.1080/02670836.2020.1795994
Ding, Jie, Shi, Shan, Dong, Zhili, Lin, Junpin, Ren, Yang, Wu, Xiaodong, Chang, Hui, and Zhou, Lian. Thu .
"Cyclic deformation and lattice strain distribution of high Nb containing TiAl alloy". United States. https://doi.org/10.1080/02670836.2020.1795994. https://www.osti.gov/servlets/purl/1774348.
@article{osti_1774348,
title = {Cyclic deformation and lattice strain distribution of high Nb containing TiAl alloy},
author = {Ding, Jie and Shi, Shan and Dong, Zhili and Lin, Junpin and Ren, Yang and Wu, Xiaodong and Chang, Hui and Zhou, Lian},
abstractNote = {Low cycle fatigue of lamellar TiAl with 8.5 at.-%Nb was studied with a total strain amplitude of 0.28% at three temperatures: room temperature, 750°C and 900°C. At room temperature, the material exhibited cyclic hardening and the fracture mode was mainly interlamellar. At 750°C and 900°C, the material showed cyclic softening and the fracture mode was translamellar. The lattice strain in γ phase was almost tensile and larger tensile lattice strain in γ phase seems detrimental. Besides, the opposite direction of {201}γ and {100}α2 lead to crack propagation along α2/γ interfaces. B2/βo phase always suffered compressive lattice strain in the tests. Finally, the destruction of lamellar microstructure was the reason for colony refinement at 750°C and 900°C.},
doi = {10.1080/02670836.2020.1795994},
journal = {Materials Science and Technology},
number = 14,
volume = 36,
place = {United States},
year = {Thu Jul 23 00:00:00 EDT 2020},
month = {Thu Jul 23 00:00:00 EDT 2020}
}
Works referenced in this record:
Electron microscope characterization of low cycle fatigue in a high-strength multiphase titanium aluminide alloy
journal, May 2010
- Appel, Fritz; Heckel, Thomas K.; Christ, Hans-Jürgen
- International Journal of Fatigue, Vol. 32, Issue 5
Microstructure evolution during dynamic recrystallization of hot deformed superalloy 718
journal, July 2008
- Wang, Y.; Shao, W. Z.; Zhen, L.
- Materials Science and Engineering: A, Vol. 486, Issue 1-2
Design, Processing, Microstructure, Properties, and Applications of Advanced Intermetallic TiAl Alloys
journal, November 2012
- Clemens, Helmut; Mayer, Svea
- Advanced Engineering Materials, Vol. 15, Issue 4
Advancement of Compositional and Microstructural Design of Intermetallic γ-TiAl Based Alloys Determined by Atom Probe Tomography
journal, September 2016
- Klein, Thomas; Clemens, Helmut; Mayer, Svea
- Materials, Vol. 9, Issue 9
Thermomechanical fatigue behaviours of a third generation γ-TiAl based alloy
journal, May 2007
- Cui, W. F.; Liu, C. M.; Bauer, V.
- Intermetallics, Vol. 15, Issue 5-6
Plastic anisotropy and fracture behavior of cyclically deformed TiAl polysynthetically twinned crystals
journal, February 1995
- Umakoshi, Y.; Yasuda, H. Y.; Nakano, T.
- Materials Science and Engineering: A, Vol. 192-193
Study on the stress-induced γ → α2 transformation in a hot-deformed Ti-45Al-10Nb alloy by high-resolution transmission electron microscopy
journal, June 1997
- Wang, J. G.; Chen, G. L.; Zhang, L. C.
- Materials Letters, Vol. 31, Issue 3-6
Effect of elastic anisotropy on the dissociation widths of superdislocations in TiAl
journal, April 2001
- Song, X. P.; Chen, G. L.
- Materials Letters, Vol. 48, Issue 5
Microstructure and properties of forged plasma arc melted pilot ingot of Ti–45Al–8.5Nb–(W, B, Y) alloy
journal, November 2016
- Gao, Shubo; Xu, Xiangjun; Shen, Zhengzhang
- Materials Science and Engineering: A, Vol. 677
Mechanical properties of high niobium TiAl alloys doped with Mo and C
journal, June 2016
- Chlupová, A.; Heczko, M.; Obrtlík, K.
- Materials & Design, Vol. 99
Review of alloy and process development of TiAl alloys
journal, October 2006
- Wu, Xinhua
- Intermetallics, Vol. 14, Issue 10-11
Fatigue properties of TiAl alloys
journal, May 2005
- Hénaff, Gilbert; Gloanec, Anne-Lise
- Intermetallics, Vol. 13, Issue 5
Gamma titanium aluminide alloys—an assessment within the competition of aerospace structural materials
journal, May 1999
- Dimiduk, D. M.
- Materials Science and Engineering: A, Vol. 263, Issue 2
Investigations of hydrogen-promoted α2-lamella decomposition of a γ-TiAl based alloy
journal, August 2015
- Zong, Y. Y.; Wen, D. S.; Guo, B.
- Materials Letters, Vol. 152
Evolution of B2(ω) region in high-Nb containing TiAl alloy in intermediate temperature range
journal, March 2017
- Wang, Xuyang; Yang, Jieren; Song, Lin
- Intermetallics, Vol. 82
Fracture characteristics of γ-TiAl alloy with high Nb content under cyclic loading
journal, May 2009
- Cui, W. F.; Liu, C. M.
- Journal of Alloys and Compounds, Vol. 477, Issue 1-2
Cyclic deformation and fatigue in TiAl intermetallic compound under plastic strain control
journal, April 2010
- Satoh, Masahide; Horibe, Susumu; Nakamura, Morihiko
- International Journal of Fatigue, Vol. 32, Issue 4
On the microsegregation of Ti–45Al–(8–9)Nb–(W, B, Y) alloy
journal, January 2007
- Xu, X. J.; Lin, J. P.; Teng, Z. K.
- Materials Letters, Vol. 61, Issue 2
Microstructure and properties of friction welding joint of Ti–45Al-8.5Nb-0. 2W-0. 2B-0. 02Y alloy
journal, September 2019
- Xu, Xiangjun; Lin, Junpin; Guo, Jian
- Intermetallics, Vol. 112
Gamma titanium aluminides: Their status and future
journal, July 1995
- Kim, Young-Won
- JOM, Vol. 47, Issue 7
Development of TiAl alloys with excellent mechanical properties and oxidation resistance
journal, February 2014
- Kim, Seong-Woong; Hong, Jae Keun; Na, Young-Sang
- Materials & Design (1980-2015), Vol. 54
Effect of deformation temperature on fatigue and fracture behavior in TiAl polysynthetically twinned crystals
journal, March 1998
- Umakoshi, Y.; Yasuda, H. Y.; Nakano, T.
- Metallurgical and Materials Transactions A, Vol. 29, Issue 13
Recent Progress in the Development of Gamma Titanium Aluminide Alloys
journal, November 2000
- Appel, F.; Brossmann, U.; Christoph, U.
- Advanced Engineering Materials, Vol. 2, Issue 11
The microstructure and tensile property degradation of a gamma-TiAl alloy during isothermal and cyclic high temperature exposures
journal, March 2011
- Zhao, Wenyue; Pei, Yanling; Zhang, Danhua
- Intermetallics, Vol. 19, Issue 3
Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment
journal, June 2006
- Roland, T.; Retraint, D.; Lu, K.
- Scripta Materialia, Vol. 54, Issue 11
Enhanced high-temperature tensile property by gradient twin structure of duplex high-Nb-containing TiAl alloy
journal, December 2018
- Ding, Jie; Zhang, Minghe; Liang, Yongfeng
- Acta Materialia, Vol. 161
Ordered ω phases in a 4Zr–4Nb-containing TiAl-based alloy
journal, May 2008
- Huang, Z. W.
- Acta Materialia, Vol. 56, Issue 8
Phase transformation and microstructure evolution of differently processed Ti–45Al–9Nb–Y alloy
journal, December 2012
- Zhang, S. Z.; Kong, F. T.; Chen, Y. Y.
- Intermetallics, Vol. 31
Microsegregation in high Nb containing TiAl alloy ingots beyond laboratory scale
journal, May 2007
- Chen, G. L.; Xu, X. J.; Teng, Z. K.
- Intermetallics, Vol. 15, Issue 5-6
Dynamic recrystallization kinetics of a powder metallurgy Ti–22Al–25Nb alloy during hot compression
journal, June 2014
- Jia, Jianbo; Zhang, Kaifeng; Lu, Zhen
- Materials Science and Engineering: A, Vol. 607
Low-cycle fatigue and deformation substructures in an engineering TiAl alloy
journal, April 2007
- Gloanec, A. L.; Jouiad, M.; Bertheau, D.
- Intermetallics, Vol. 15, Issue 4
Physical constants, deformation twinning, and microcracking of titanium aluminides
journal, January 1998
- Yoo, M. H.; Fu, C. L.
- Metallurgical and Materials Transactions A, Vol. 29, Issue 1
Precipitation behavior of the ωo phase in an annealed high Nb-TiAl alloy
journal, April 2017
- Ye, Teng; Song, Lin; Gao, Shubo
- Journal of Alloys and Compounds, Vol. 701
Intermetallic alloys based on gamma titanium aluminide
journal, July 1989
- Kim, Young-Won
- JOM, Vol. 41, Issue 7
Plastic anisotropy and fatigue of TiAl PST crystals: a review
journal, January 1996
- Umakoshi, Y.; Yasuda, H. Y.; Nakano, T.
- Intermetallics, Vol. 4
Ordered α2 to ωo phase transformations in high Nb-containing TiAl alloys
journal, June 2015
- Song, Lin; Xu, Xiangjun; You, Li
- Acta Materialia, Vol. 91
Cyclic deformation mechanisms in a cast gamma titanium aluminide alloy
journal, July 2005
- Jouiad, Mustapha; Gloanec, Anne-Lise; Grange, Marjolaine
- Materials Science and Engineering: A, Vol. 400-401
Microstructure stability and micro-mechanical behavior of as-cast gamma-TiAl alloy during high-temperature low cycle fatigue
journal, February 2018
- Ding, Jie; Zhang, Minghe; Ye, Teng
- Acta Materialia, Vol. 145
High tensile ductility and strength in the Ti-42Al-6V-1Cr alloy
journal, March 2017
- Liu, Hongwu; Li, Zhenxi; Gao, Fan
- Journal of Alloys and Compounds, Vol. 698
Residual stress. Part 2 – Nature and origins
journal, April 2001
- Withers, P. J.; Bhadeshia, H. K. D. H.
- Materials Science and Technology, Vol. 17, Issue 4
Effect of stress ratio on fatigue crack growth in TiAl intermetallics at room and elevated temperatures
journal, October 2000
- Zhu, S. J.; Peng, L. M.; Moriya, T.
- Materials Science and Engineering: A, Vol. 290, Issue 1-2
Polysynthetic twinned TiAl single crystals for high-temperature applications
journal, June 2016
- Chen, Guang; Peng, Yingbo; Zheng, Gong
- Nature Materials, Vol. 15, Issue 8
Cyclic plasticity and strain localization in cast γ-TiAl based alloy
journal, January 2011
- Petrenec, M.; Polák, J.; Buček, P.
- Procedia Engineering, Vol. 10
Development and evaluation of TiAl sheet structures for hypersonic applications
journal, August 2007
- Draper, S. L.; Krause, D.; Lerch, B.
- Materials Science and Engineering: A, Vol. 464, Issue 1-2
Microstructure degradation in high temperature fatigue of TiAl alloy
journal, August 2014
- Kruml, T.; Obrtlík, K.
- International Journal of Fatigue, Vol. 65
Cyclic deformation mechanisms in a gamma titanium aluminide alloy at room temperature
journal, January 2005
- Gloanec, A. L.; Henaff, G.; Jouiad, M.
- Scripta Materialia, Vol. 52, Issue 2
Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP)
journal, August 2019
- Younas, Muhammad; Jaffery, Syed Husain Imran; Khan, Mushtaq
- The International Journal of Advanced Manufacturing Technology, Vol. 105, Issue 1-4
Interrogation of the microstructure and residual stress of a nickel-base alloy subjected to surface severe plastic deformation
journal, February 2008
- Ortiz, A. L.; Tian, J. W.; Villegas, J. C.
- Acta Materialia, Vol. 56, Issue 3
Cyclic deformation and microstructure evolution of high Nb containing TiAl alloy during high temperature low cycle fatigue
journal, June 2017
- Ding, Jie; Liang, Yongfeng; Xu, Xiangjun
- International Journal of Fatigue, Vol. 99
Thermal exposure induced α2+γ→B2(ω) and α2→B2(ω) phase transformations in a high Nb fully lamellar TiAl alloy
journal, January 2003
- Huang, Z. W.; Voice, W.; Bowen, P.
- Scripta Materialia, Vol. 48, Issue 1