Formation of omega phase induced by laser shock peening in Ti-17 alloy
Abstract
Synchrotron-based high-energy X-ray diffraction and transmission electron microscopy were used to study the in-depth compressive residual strains and microstructure evolution in Ti-17 alloy subjected to two-sided laser shock peening (LSP). A noticeable difference was observed in the lattice strains and extents of peak broadening on the two sides of the sample. The compressive residual strain was smaller and the peak broadening was more pronounced on the bottom surface in comparison to the top surface. This is due to the β → ω phase transformation induced by LSP on the bottom surface. It was determined that the ω phase with fine particle morphology and incommensurate structure is located mainly in the 15 μm-thick layer under the bottom surface. The formation of the LSP-induced ω phase on the bottom surface can be attributed to the adiabatic increase in temperature due to the higher shock peak pressure on the bottom surface, and can result in the relaxation of the accumulated residual compressive strain in the original phases.
- Authors:
-
- Northeastern Univ., Shenyang (China)
- Northeastern Univ., Shenyang (China); Univ. of Science and Technology, Beijing (China)
- Univ. of Science and Technology, Beijing (China)
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Air Force Engineering Univ., Xi'an (China)
- Publication Date:
- Research Org.:
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Sponsoring Org.:
- National Natural Science Foundation of China (NSFC); USDOE Office of Science (SC), Basic Energy Sciences (BES). Scientific User Facilities Division
- OSTI Identifier:
- 1630919
- Grant/Contract Number:
- AC02-06CH11357
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Materials Characterization
- Additional Journal Information:
- Journal Volume: 159; Journal Issue: C; Journal ID: ISSN 1044-5803
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; Phase transformation; Residual strain; Strain relaxation; Synchrotron-based high-energy X-ray diffraction; Ti-17; laser shock peening
Citation Formats
Chen, Si, Mu, Juan, Wang, Yandong, Zhang, Minghe, Ren, Yang, and An, Zhibin. Formation of omega phase induced by laser shock peening in Ti-17 alloy. United States: N. p., 2019.
Web. doi:10.1016/j.matchar.2019.110017.
Chen, Si, Mu, Juan, Wang, Yandong, Zhang, Minghe, Ren, Yang, & An, Zhibin. Formation of omega phase induced by laser shock peening in Ti-17 alloy. United States. https://doi.org/10.1016/j.matchar.2019.110017
Chen, Si, Mu, Juan, Wang, Yandong, Zhang, Minghe, Ren, Yang, and An, Zhibin. Sat .
"Formation of omega phase induced by laser shock peening in Ti-17 alloy". United States. https://doi.org/10.1016/j.matchar.2019.110017. https://www.osti.gov/servlets/purl/1630919.
@article{osti_1630919,
title = {Formation of omega phase induced by laser shock peening in Ti-17 alloy},
author = {Chen, Si and Mu, Juan and Wang, Yandong and Zhang, Minghe and Ren, Yang and An, Zhibin},
abstractNote = {Synchrotron-based high-energy X-ray diffraction and transmission electron microscopy were used to study the in-depth compressive residual strains and microstructure evolution in Ti-17 alloy subjected to two-sided laser shock peening (LSP). A noticeable difference was observed in the lattice strains and extents of peak broadening on the two sides of the sample. The compressive residual strain was smaller and the peak broadening was more pronounced on the bottom surface in comparison to the top surface. This is due to the β → ω phase transformation induced by LSP on the bottom surface. It was determined that the ω phase with fine particle morphology and incommensurate structure is located mainly in the 15 μm-thick layer under the bottom surface. The formation of the LSP-induced ω phase on the bottom surface can be attributed to the adiabatic increase in temperature due to the higher shock peak pressure on the bottom surface, and can result in the relaxation of the accumulated residual compressive strain in the original phases.},
doi = {10.1016/j.matchar.2019.110017},
journal = {Materials Characterization},
number = C,
volume = 159,
place = {United States},
year = {Sat Nov 16 00:00:00 EST 2019},
month = {Sat Nov 16 00:00:00 EST 2019}
}
Web of Science