Double-Line-Frequency Ripple Model, Analysis & Impedance Design for Energy Stored Single-Phase Quasi-Z Source Photovoltaic System

Liang, Weihua; Liu, Yushan; Ge, Baoming; Abu-Rub, Haitham; Balog, Robert S.; Xue, Yaosuo

doi:10.1109/TIE.2017.2750630

Title: Double-Line-Frequency Ripple Model, Analysis & Impedance Design for Energy Stored Single-Phase Quasi-Z Source Photovoltaic System

Full Record
Other Related Research

Abstract

The battery energy stored quasi-Z-source (BESqZS) based photovoltaic (PV) power generation system combines advantages of the qZS inverter and the battery energy storage system. But, the second harmonic (2ω) power ripple degrades the system’s performance and affects the system’s design. An accurate model to analyze the 2ω ripple is very important. The existing models did not consider the battery, or assumed a symmetric qZS network with L₁=L₂ and C₁=C₂, which limits the design freedom and causes oversized impedance parameters. Our paper proposes a comprehensive model for the single-phase BES-qZS-PV inverter system, where the battery is considered and there is no restriction of L₁=L₂ and C₁=C₂. Based on the built model, a BES-qZS impedance design method is proposed to mitigate the 2ω ripple with asymmetric qZS network. Simulation and experimental results verify the proposed 2ω ripple model and impedance design method.

Authors:

Liang, Weihua ^[1]; Liu, Yushan ^[2]; Ge, Baoming ^[3]; Abu-Rub, Haitham ^[4]; Balog, Robert S. ^[5];

^[6]

Beijing Jiaotong Univ. (China)
Texas A & M Univ., Doha (Qatar)
Texas A & M Univ., College Station, TX (United States). Dept. of Electrical and Computer Engineering
Texas A & M Univ., Doha (Qatar). Electrical and Computer Engineering Dept.
Texas A & M Univ., College Station, TX (United States). Electrical and Computer Engineering
Siemens Corporation, Princeton, NJ (United States). Corporate Technology

Publication Date:: Fri Sep 08 00:00:00 EDT 2017

Research Org.:: Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

Sponsoring Org.:: USDOE

OSTI Identifier:: 1394770

Grant/Contract Number:: AC05-00OR22725

Resource Type:: Accepted Manuscript

Journal Name:: IEEE Translations on Industrial Electronics

Additional Journal Information:: Journal Volume: PP; Journal Issue: 99; Journal ID: ISSN 0278-0046

Publisher:: IEEE

Country of Publication:: United States

Language:: English

Subject:: 25 ENERGY STORAGE; 2ω ripple model; quasi-Z-source inverter; battery energy storage; photovoltaic power system

Citation Formats


                    Liang, Weihua, Liu, Yushan, Ge, Baoming, Abu-Rub, Haitham, Balog, Robert S., and Xue, Yaosuo. Double-Line-Frequency Ripple Model, Analysis & Impedance Design for Energy Stored Single-Phase Quasi-Z Source Photovoltaic System.  United States: N. p., 2017. 
Web.  doi:10.1109/TIE.2017.2750630.

Copy to clipboard


                    Liang, Weihua, Liu, Yushan, Ge, Baoming, Abu-Rub, Haitham, Balog, Robert S., & Xue, Yaosuo. Double-Line-Frequency Ripple Model, Analysis & Impedance Design for Energy Stored Single-Phase Quasi-Z Source Photovoltaic System.  United States.  https://doi.org/10.1109/TIE.2017.2750630

Copy to clipboard


                    Liang, Weihua, Liu, Yushan, Ge, Baoming, Abu-Rub, Haitham, Balog, Robert S., and Xue, Yaosuo. Fri .  
"Double-Line-Frequency Ripple Model, Analysis & Impedance Design for Energy Stored Single-Phase Quasi-Z Source Photovoltaic System".  United States.  https://doi.org/10.1109/TIE.2017.2750630.  https://www.osti.gov/servlets/purl/1394770.

Copy to clipboard


                    
@article{osti_1394770,

  title        = {Double-Line-Frequency Ripple Model, Analysis & Impedance Design for Energy Stored Single-Phase Quasi-Z Source Photovoltaic System},

  author       = {Liang, Weihua and Liu, Yushan and Ge, Baoming and Abu-Rub, Haitham and Balog, Robert S. and Xue, Yaosuo},

  abstractNote = {The battery energy stored quasi-Z-source (BESqZS) based photovoltaic (PV) power generation system combines advantages of the qZS inverter and the battery energy storage system. But, the second harmonic (2ω) power ripple degrades the system’s performance and affects the system’s design. An accurate model to analyze the 2ω ripple is very important. The existing models did not consider the battery, or assumed a symmetric qZS network with L1=L2 and C1=C2, which limits the design freedom and causes oversized impedance parameters. Our paper proposes a comprehensive model for the single-phase BES-qZS-PV inverter system, where the battery is considered and there is no restriction of L1=L2 and C1=C2. Based on the built model, a BES-qZS impedance design method is proposed to mitigate the 2ω ripple with asymmetric qZS network. Simulation and experimental results verify the proposed 2ω ripple model and impedance design method.},

  doi          = {10.1109/TIE.2017.2750630},

  journal      = {IEEE Translations on Industrial Electronics},

  number       = 99,

  volume       = PP,

  place        = {United States},

  year         = {Fri Sep 08 00:00:00 EDT 2017},

  month        = {Fri Sep 08 00:00:00 EDT 2017}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (DOE)

Publisher's Version of Record

https://doi.org/10.1109/TIE.2017.2750630

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 36 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Modeling, Analysis, and Impedance Design of Battery Energy Stored Single-Phase Quasi-Z Source Photovoltaic Inverter System

Conference Xue, Yaosuo

The battery energy stored quasi-Z-source (BES-qZS) based photovoltaic (PV) power generation system combines advantages of the qZS inverter and the battery energy storage system. However, the second harmonic (2 ) power ripple will degrade the system's performance and affect the system's design. An accurate model to analyze the 2 ripple is very important. The existing models did not consider the battery, and with the assumption L1=L2 and C1=C2, which causes the non-optimized design for the impedance parameters of qZS network. This paper proposes a comprehensive model for single-phase BES-qZS-PV inverter system, where the battery is considered and without any restrictionmore »« less
Common Mode Voltage Reduction of Single-Phase Quasi-Z-Source Inverter-Based Photovoltaic System

Journal Article Liu, Yushan ; Ge, Baoming ; Li, Xiao ; ... - IEEE Access

A common mode voltage (CMV) reduction method is proposed for the active power filter (APF) integrated single-phase quasi-Z-source inverter (qZSI) based photovoltaic (PV) power system. The APF integrated qZSI completely compensates the dc-side double-line-frequency (2ω) ripple through the APF capacitor, while maintaining low qZS inductance and capacitance. The proposed method reduces the CMV amplitude to half of that using the traditional sinusoidal pulse width modulation (SPWM). The switching and conduction power losses are analyzed. Simulation and experimental results demonstrate the proposed method reduces CMV without comprising performance and efficiency of the APF integrated single-phase qZSI.
https://doi.org/10.1109/ACCESS.2019.2949026

Full Text Available
Seamless Transition Between Dual Operating Modes of A Single-Phase Quasi-Z-Source Inverter

Conference Li, Xiao ; Xue, Yaosuo

A model predictive control (MPC) based seamless transition between standalone and grid-connected operations is proposed for the active power filter (APF) integrated single-phase quasi-Z-source inverter (qZSI) power system. The predictive models of AC output, qZS network, and APF branch are established. The qZSI operating modes are analyzed to form corresponding cost functions. With the predictions, references, and switching states, the minimum cost function is determined to find the optimal switching state for qZSI power devices. The APF branch compensates completely the dc-side double-line-frequency (2ω) ripple under MPC, so low qZS inductance and capacitance are achieved without loss of performance. Simulationmore »« less
https://doi.org/10.1109/SGRE46976.2019.9020682

Full Text Available
Low Frequency Ripple Reduction in Input DC Current and AC Line Currents With 240$$^{\circ }$$ Clamped Space Vector PWM in Grid-Connected Photovoltaic Converters

Journal Article Qamar, Hafsa ; Qamar, Haleema ; Korada, Nikhil ; ... - IEEE Open Journal of Power Electronics

240°-Clamped Space Vector PWM (240CPWM) is a lowest switching loss PWM method in cascaded architecture of DC-DC stage followed by DC-AC stage that reduces the switching loss by 85% in the DC-AC stage at unity power factor as compared to conventional space vector PWM (CSVPWM). 240CPWM requires unique six-pulse dynamically varying DC link voltage instead of constant DC link voltage which introduces low frequency harmonics predominantly around six times the fundamental frequency (6f₁). These low frequency harmonics distort the input DC current and AC line currents. Moreover, they change the operating point of maximum power point tracking (MPPT), reducing themore »« less
https://doi.org/10.1109/OJPEL.2023.3279924
Model Predictive Control of Dual-Mode Energy-Stored Quasi-Z-Source Photovoltaic System

Conference Xue, Yaosuo

The energy-stored quasi-Z-source inverter (ES-qZSI) has attracted much attention for photovoltaic (PV) power generations, due to its capability to stabilize the PV power fluctuations and other advantages of Z-source inverter. Traditional ES-qZSI suffers from poor operation at night or cloudy days when PV power is extremely low. In order to overcome that, this paper proposes a model predictive control (MPC) strategy for an improved dual-mode ES-qZSI, which is designed to support all-weather operation of PV power generation system. The system predictive models in both day and night operating modes are derived. And the control strategy based on MPC is disclosedmore »« less
Full Text Available

Similar Records