Nb3Sn RRP® strand and Rutherford cable development for a 15 T dipole demonstrator

Barzi, E.; Andreev, N.; Li, P.; Lombardo, V.; Turrioni, D.; Zlobin, A. V.

doi:10.1109/TASC.2016.2535963

Title: Nb₃Sn RRP® strand and Rutherford cable development for a 15 T dipole demonstrator

Full Record
Other Related Research

Abstract

Keystoned Rutherford cables made of 28 strands and with a stainless steel core were developed and manufactured using 1 mm Nb3Sn composite wires produced by Oxford Superconducting Technology with 127 and 169 restacks using the Restacked-Rod-Process^®. Furthermore, the performance and properties of these cables were studied to evaluate possible candidates for 15 T accelerator magnets.

Authors:

Barzi, E. ^[1]; Andreev, N. ^[1]; Li, P. ^[1]; Lombardo, V. ^[1]; Turrioni, D. ^[1]; Zlobin, A. V. ^[1]

Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

Publication Date:: Wed Mar 16 00:00:00 EDT 2016

Research Org.:: Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

Sponsoring Org.:: USDOE Office of Science (SC), High Energy Physics (HEP)

OSTI Identifier:: 1249206

Report Number(s):: FERMILAB-PUB-16-039-TD
Journal ID: ISSN 1051-8223; 1446944

Grant/Contract Number:: AC02-07CH11359

Resource Type:: Accepted Manuscript

Journal Name:: IEEE Transactions on Applied Superconductivity

Additional Journal Information:: Journal Name: IEEE Transactions on Applied Superconductivity; Journal ID: ISSN 1051-8223

Publisher:: Institute of Electrical and Electronics Engineers (IEEE)

Country of Publication:: United States

Language:: English

Subject:: 43 PARTICLE ACCELERATORS; accelerator magnet; critical current density; Nb₃Sn strand; residual resistivity ratio; Rutherford cable

Citation Formats


                    Barzi, E., Andreev, N., Li, P., Lombardo, V., Turrioni, D., and Zlobin, A. V. Nb3Sn RRP® strand and Rutherford cable development for a 15 T dipole demonstrator.  United States: N. p., 2016. 
Web.  doi:10.1109/TASC.2016.2535963.

Copy to clipboard


                    Barzi, E., Andreev, N., Li, P., Lombardo, V., Turrioni, D., & Zlobin, A. V. Nb3Sn RRP® strand and Rutherford cable development for a 15 T dipole demonstrator.  United States.  https://doi.org/10.1109/TASC.2016.2535963

Copy to clipboard


                    Barzi, E., Andreev, N., Li, P., Lombardo, V., Turrioni, D., and Zlobin, A. V. Wed .  
"Nb3Sn RRP® strand and Rutherford cable development for a 15 T dipole demonstrator".  United States.  https://doi.org/10.1109/TASC.2016.2535963.  https://www.osti.gov/servlets/purl/1249206.

Copy to clipboard


                    
@article{osti_1249206,

  title        = {Nb3Sn RRP® strand and Rutherford cable development for a 15 T dipole demonstrator},

  author       = {Barzi, E. and Andreev, N. and Li, P. and Lombardo, V. and Turrioni, D. and Zlobin, A. V.},

  abstractNote = {Keystoned Rutherford cables made of 28 strands and with a stainless steel core were developed and manufactured using 1 mm Nb3Sn composite wires produced by Oxford Superconducting Technology with 127 and 169 restacks using the Restacked-Rod-Process®. Furthermore, the performance and properties of these cables were studied to evaluate possible candidates for 15 T accelerator magnets.},

  doi          = {10.1109/TASC.2016.2535963},

  journal      = {IEEE Transactions on Applied Superconductivity},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Wed Mar 16 00:00:00 EDT 2016},

  month        = {Wed Mar 16 00:00:00 EDT 2016}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (DOE)

Publisher's Version of Record

https://doi.org/10.1109/TASC.2016.2535963

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 4 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Heat Treatment Optimization of Rutherford Cables for a 15 T Nb₃Sn Dipole Demonstrator

Journal Article Barzi, Emanuela ; Bossert, Marianne ; Field, Michael ; ... - IEEE Transactions on Applied Superconductivity

FNAL has been developing a 15 T Nb₃Sn dipole demonstrator for a future Very High Energy pp Collider based on an optimized 60-mm aperture 4-layer “cos-theta” coil. In order to increase magnet efficiency, we graded the coil by using two cables with same 15 mm width and different thicknesses made of two different Restacked Rod Process (RRP®) wires. Due to the non-uniform field distribution in dipole coils the maximum field in the inner coil will reach 15-16 T, whereas the maximum field in the outer coil is 12-13 T. In preparation for the 15 T dipole coil reaction, heat treatmentmore »« less
Cited by 4
https://doi.org/10.1109/TASC.2016.2645180

Full Text Available
Development and Fabrication of Nb3Sn Rutherford Cable for the 11 T DS Dipole Demonstration Model

Conference Barzi, E ; Lombardo, V ; Nobrega, F ; ...

Fermilab and CERN started the development of 11 T 11-m long Nb{sub 3}Sn dipoles to replace few regular LHC NbTi dipoles and free space for cold collimators in LHC DS areas. An important step in the design of these magnets is the development of the high aspect ratio Nb{sub 3}Sn cable to achieve the nominal field of 11 T at the nominal LHC operating current of 11.85 kA with 20% margin. The keystoned cables 14.7 mm wide with and without a stainless steel core were made out of hard Cu wires and Nb{sub 3}Sn RRP strand 0.7 mm nominal diameter.more »« less
Full Text Available
Nb3Sn cable development for the 11 T dipole demonstation model

Conference Barzi, E ; Lombardo, V ; Nobrega, F ; ...

Fermilab (FNAL) and CERN have started the development of 11 T 11-m long Nb{sub 3}Sn dipoles to replace a number of LHC NbTi dipoles and free space for cold collimators in the LHC DS areas. An important step in the design of these magnets is the development of the high aspect ratio Nb{sub 3}Sn cable to achieve the nominal field of 11 T at the nominal LHC operating current of 11.85 kA at 1.9 K with 20% margin. Keystoned cables with 40 and 41 strands with and without a stainless steel core were made out of hard Cu wires andmore »« less
Full Text Available
The effect of heat treatment on the stability of Nb₃Sn RRP-150/169 strands

Journal Article Li, Pei ; Turrioni, Daniele ; Barzi, Emanuela ; ... - IEEE Transactions on Applied Superconductivity

Here, the magnetic stability of superconductor strands and cables is a key issue in the successful building and operation of high-field accelerator magnets. In this paper, we report the study of a state-of-the-art 0.7 mm Nb₃Sn restacked-rod-process strand manufactured by Oxford Instrument Superconductor Technology. This conductor will be used in Rutherford cable for a 15-T Nb₃Sn dipole demonstrator being built at Fermi National Accelerator Laboratory. Particularly, this study focuses on the impact of varying heat treatment conditions on the stability of the strand. Both the stability against internal flux jumps and external thermal perturbations are studied.
Cited by 13
https://doi.org/10.1109/TASC.2017.2662938

Full Text Available
Performance of Nb3Sn RRP strands and cables based on a 108/127 stack design

Journal Article Barzi, E ; Ambrosio, G ; Andreev, N ; ... - IEEE Trans.Appl.Supercond.17:2718-2721,2007

The high performance Nb{sub 3}Sn strand produced by Oxford Superconducting Technology (OST) with the Restack Rod Process (RRP) is presently considered as a baseline conductor for the Fermilab's accelerator magnet R&D program. To improve the strand stability in the current and field range expected in magnet models, the number of subelements in the strand was increased by a factor of two (from 54 to 108), which resulted in a smaller effective filament size. The performance of the 1.0 and 0.7 mm strands of this design was studied using virgin and deformed strand samples. 27-strand Rutherford cables made of 1 mmmore »« less
Full Text Available

Similar Records

Title: Nb3Sn RRP® strand and Rutherford cable development for a 15 T dipole demonstrator

Abstract

Citation Formats

Title: Nb₃Sn RRP® strand and Rutherford cable development for a 15 T dipole demonstrator