13 Search Results

We present the measurement of 𝜋⁺-argon inelastic cross sections using the ProtoDUNE single-phase liquid argon time projection chamber in the incident 𝜋⁺ kinetic energy range of 500–800 MeV in multiple exclusive channels (absorption, charge exchange, and the remaining inelastic interactions). The results of this analysis are important inputs to simulations of liquid argon neutrino experiments such as the Deep Underground Neutrino Experiment and the Short Baseline Neutrino program at Fermi National Accelerator Laboratory. They will be employed to improve the modeling of final state interactions within neutrino event generators used by these experiments, as well as the modeling of 𝜋⁺-argonmore » secondary interactions within the liquid argon. This is the first measurement of 𝜋⁺-argon absorption at this kinetic energy range as well as the first ever measurement of 𝜋⁺-argon charge exchange.« less

The NA62 experiment at CERN has the capability to collect data in a beam-dump mode, where 400 GeV protons are dumped on an absorber. In this configuration, New Physics particles, including dark photons, dark scalars, and axion-like particles, may be produced in the absorber and decay in the instrumented volume beginning approximately 80 m downstream of the dump. A search for these particles decaying in flight to hadronic final states is reported, based on an analysis of a sample of 1.4 x 10¹⁷ protons on dump collected in 2021. No evidence of a New Physics signal is observed, excluding newmore » regions of parameter spaces of multiple models.« less

The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on ⁴⁰Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called “brems flipping,” as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluatedmore » for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE’s burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage.« less

The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on ${}_{40}\mathrm{Ar}$ and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called “brems flipping,” as well as the burst direction from anmore » ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE’s burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage.« less

ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/𝑐 beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380 ± 26 mbarns for the 6 GeV/𝑐 setting and 379 ± 35 mbarns for the 7 GeV/𝑐 setting.

The NA62 experiment at CERN utilises a differential Cherenkov counter with achromatic ring focus (CEDAR) for tagging kaons within an unseparated monochromatic beam of charged hadrons. The CEDAR-H detector was developed to minimise the amount of material in the path of the beam by using hydrogen gas as the radiator medium. The detector was shown to satisfy the kaon tagging requirements in a test-beam before installation and commissioning at the experiment. The CEDAR-H performance was measured using NA62 data collected in 2023.

A sample of 3984 candidates of the $$K^{+} → π^{+} γγ$$ decay, with an estimated background of 291 ± 14 events, was collected by the NA62 experiment at CERN during 2017–2018. In order to describe the observed di-photon mass spectrum, the next-to-leading order contribution in chiral perturbation theory was found to be necessary. The decay branching ratio in the full kinematic range is measured to be (9.61 ± 0.17) x 10^-7. The first search for production and prompt decay of an axion-like particle with gluon coupling in the process $$K^{+} → π^{+} a$$, $a → γγ$ is also reported.

The first search for ultra-rare K⁺ decays into the π⁺e⁺e^-e⁺e^- final state is reported, using a dataset collected by the NA62 experiment at CERN in 2017–2018. An upper limit of 1.4 x 10^-8 at 90% CL is obtained for the branching ratio of the K⁺ → π⁺e⁺e^-e⁺e^- decay, predicted in the Standard Model to be (7.2 ± 0.7) x 10^-11 . Upper limits at 90% CL are obtained at the level of 10^-9 for the branching ratios of two prompt decay chains involving pair-production of hidden-sector mediators: K⁺ → π⁺ aa,a → e⁺e^- and K⁺ → π⁺ S,S → A'A',A'more » → e⁺e^-.« less

The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% formore » the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/c charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$$\pm 0.6$$% and 84.1$$\pm 0.6$$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation.« less

The rapid development of general-purpose computing ongraphics processing units (GPGPU) is allowing the implementationof highly-parallelized Monte Carlo simulation chains for particlephysics experiments. This technique is particularly suitable forthe simulation of a pixelated charge readout for time projectionchambers, given the large number of channels that this technologyemploys. Here we present the first implementation of a fullmicrophysical simulator of a liquid argon time projectionchamber (LArTPC) equipped with light readout and pixelated chargereadout, developed for the DUNE Near Detector. The software isimplemented with an end-to-end set of GPU-optimizedalgorithms. The algorithms have been written in Python andtranslated into CUDA kernels using Numba, a just-in-timemore » compilerfor a subset of Python and NumPy instructions. The GPUimplementation achieves a speed up of four orders of magnitudecompared with the equivalent CPU version. The simulation of thecurrent induced on 10^3 pixels takes around 1 ms on the GPU,compared with approximately 10 s on the CPU. The results of thesimulation are compared against data from a pixel-readout LArTPCprototype.« less